- CHAPTER I MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
- SUBCHAPTER A OFFICIAL EMBLEM AND OMB CONTROL NUMBERS FOR RECORDKEEPING AND REPORTING
- PART 1 MINE SAFETY AND HEALTH ADMINISTRATION; ESTABLISHMENT AND USE OF OFFICIAL EMBLEM
- § 1.1 Official emblem.
- § 1.2 Description.
- § 1.3 Use of letters and acronym MSHA.
- PART 3 OMB CONTROL NUMBERS UNDER THE PAPERWORK REDUCTION ACT
- § 3.1 OMB control numbers.
- SUBCHAPTER B TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS
- PART 5 FEES FOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS
- § 5.10 Purpose and scope.
- § 5.30 Fee calculation.
- § 5.40 Fee administration.
- § 5.50 Fee revisions.
- PART 6 TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS
- § 6.1 Purpose and effective date.
- § 6.2 Definitions.
- § 6.10 Use of independent laboratories.
- § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards.
- § 6.30 MSHA listing of equivalent non-MSHA product safety standards.
- PART 7 TESTING BY APPLICANT OR THIRD PARTY
- Subpart A General
- § 7.1 Purpose and scope.
- § 7.2 Definitions.
- § 7.3 Application procedures and requirements.
- § 7.4 Product testing.
- § 7.5 Issuance of approval.
- § 7.6 Approval marking and distribution record.
- § 7.7 Quality assurance.
- § 7.8 Post-approval product audit.
- § 7.9 Revocation.
- § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards.
- Subpart B Brattice Cloth and Ventilation Tubing
- § 7.21 Purpose and effective date.
- § 7.22 Definitions.
- § 7.23 Application requirements.
- § 7.24 Technical requirements.
- § 7.25 Critical characteristics.
- § 7.26 Flame test apparatus.
- § 7.27 Test for flame resistance of brattice cloth.
- § 7.28 Test for flame resistance of rigid ventilation tubing.
- § 7.29 Approval marking.
- § 7.30 Post-approval product audit.
- § 7.31 New technology.
- Subpart C Battery Assemblies
- § 7.41 Purpose and effective date.
- § 7.42 Definitions.
- § 7.43 Application requirements.
- § 7.44 Technical requirements.
- § 7.45 Critical characteristics
- § 7.46 Impact test.
- § 7.47 Deflection temperature test.
- § 7.48 Acid resistance test.
- § 7.49 Approval marking.
- § 7.50 Post-approval product audit.
- § 7.51 Approval checklist.
- § 7.52 New technology.
- Subpart D Multiple-Shot Blasting Units
- § 7.61 Purpose and effective date.
- § 7.62 Definitions.
- § 7.63 Application requirements.
- § 7.64 Technical requirements.
- § 7.65 Critical characteristics.
- § 7.66 Output energy test.
- § 7.67 Construction test.
- § 7.68 Firing line terminals test.
- § 7.69 Approval marking.
- § 7.70 Post-approval product audit.
- § 7.71 Approval checklist.
- § 7.72 New technology.
- Subpart E Diesel Engines Intended for Use in Underground Coal Mines
- § 7.81 Purpose and effective date.
- § 7.82 Definitions.
- § 7.83 Application requirements.
- § 7.84 Technical requirements.
- § 7.85 Critical characteristics.
- § 7.86 Test equipment and specifications.
- § 7.87 Test to determine the maximum fuel-air ratio.
- § 7.88 Test to determine the gaseous ventilation rate.
- § 7.89 Test to determine the particulate index.
- § 7.90 Approval marking.
- § 7.91 Post-approval product audit.
- § 7.92 New technology.
- Subpart F Diesel Power Packages Intended for Use in Areas of Underground Coal Mines Where Permissible Electric Equipment is Required
- § 7.95 Purpose and effective date.
- § 7.96 Definitions.
- § 7.97 Application requirements.
- § 7.98 Technical requirements.
- § 7.99 Critical characteristics.
- § 7.100 Explosion tests.
- § 7.101 Surface temperature tests.
- § 7.102 Exhaust gas cooling efficiency test.
- § 7.103 Safety system control test.
- § 7.104 Internal static pressure test.
- § 7.105 Approval marking.
- § 7.106 Post-approval product audit.
- § 7.107 New technology.
- § 7.108 Power package checklist.
- Subpart J Electric Motor Assemblies
- § 7.301 Purpose and effective date.
- § 7.302 Definitions.
- § 7.303 Application requirements.
- § 7.304 Technical requirements.
- § 7.305 Critical characteristics.
- § 7.306 Explosion tests.
- § 7.307 Static pressure test.
- § 7.308 Lockwasher equivalency test.
- § 7.309 Approval marking.
- § 7.310 Post-approval product audit.
- § 7.311 Approval checklist.
- Subpart K Electric Cables, Signaling Cables, and Cable Splice Kits
- § 7.401 Purpose and effective date.
- § 7.402 Definitions.
- § 7.403 Application requirements.
- § 7.404 Technical requirements.
- § 7.405 Critical characteristics.
- § 7.406 Flame test apparatus.
- § 7.407 Test for flame resistance of electric cables and cable splices.
- § 7.408 Test for flame resistance of signaling cables.
- § 7.409 Approval marking.
- § 7.410 Post-approval product audit.
- § 7.411 New technology.
- Subpart L Refuge Alternatives
- § 7.501 Purpose and scope.
- § 7.502 Definitions.
- § 7.503 Application requirements.
- § 7.504 Refuge alternatives and components; general requirements.
- § 7.505 Structural components.
- § 7.506 Breathable air components.
- § 7.507 Air-monitoring components.
- § 7.508 Harmful gas removal components.
- § 7.509 Approval markings.
- § 7.510 New technology.
- PART 14 REQUIREMENTS FOR THE APPROVAL OF FLAME-RESISTANT CONVEYOR BELTS
- Subpart A General Provisions
- § 14.1 Purpose, effective date for approval holders.
- § 14.2 Definitions.
- § 14.3 Observers at tests and evaluations.
- § 14.4 Application procedures and requirements.
- § 14.5 Test samples.
- § 14.6 Issuance of approval.
- § 14.7 Approval marking and distribution records.
- § 14.8 Quality assurance.
- § 14.9 Disclosure of information.
- § 14.10 Post-approval product audit.
- § 14.11 Revocation.
- Subpart B Technical Requirements
- § 14.20 Flame resistance.
- § 14.21 Laboratory-scale flame test apparatus.
- § 14.22 Test for flame resistance of conveyor belts.
- § 14.23 New technology.
- PART 15 REQUIREMENTS FOR APPROVAL OF EXPLOSIVES AND SHEATHED EXPLOSIVE UNITS
- Subpart A General Provisions
- § 15.1 Purpose and effective dates.
- § 15.2 Definitions.
- § 15.3 Observers at tests and evaluation.
- § 15.4 Application procedures and requirements.
- § 15.5 Test samples.
- § 15.6 Issuance of approval.
- § 15.7 Approval marking.
- § 15.8 Quality assurance.
- § 15.9 Disclosure of information.
- § 15.10 Post-approval product audit.
- § 15.11 Revocation.
- Subpart B Requirements for Approval of Explosives
- § 15.20 Technical requirements.
- § 15.21 Tolerances for ingredients.
- § 15.22 Tolerances for performance, wrapper, and specific gravity.
- Subpart C Requirements for Approval of Sheathed Explosive Units or Other Explosive Units Designed to be Fired Outside the Confines of a Borehole
- § 15.30 Technical requirements.
- § 15.31 Tolerances for ingredients.
- § 15.32 Tolerances for weight of explosive, sheath, wrapper, and specific gravity.
- PART 18 ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES
- Subpart A General Provisions
- § 18.1 Purpose.
- § 18.2 Definitions.
- § 18.3 Consultation.
- § 18.4 Electrical equipment for which approval is issued.
- § 18.5 Equipment for which certification will be issued.
- § 18.6 Applications.
- § 18.7 [Reserved]
- § 18.8 Date for conducting investigation and tests.
- § 18.9 Conduct of investigations and tests.
- § 18.10 Notice of approval or disapproval.
- § 18.11 Approval plate.
- § 18.12 Letter of certification.
- § 18.13 Certification plate.
- § 18.14 Identification of tested noncertified explosion-proof enclosures.
- § 18.15 Changes after approval or certification.
- § 18.16 Withdrawal of approval, certification, or acceptance.
- Subpart B Construction and Design Requirements
- § 18.20 Quality of material, workmanship, and design.
- § 18.21 Machines equipped with powered dust collectors.
- § 18.22 Boring-type machines equipped for auxiliary face ventilation.
- § 18.23 Limitation of external surface temperatures.
- § 18.24 Electrical clearances.
- § 18.25 Combustible gases from insulating material.
- § 18.26 Static electricity.
- § 18.27 Gaskets.
- § 18.28 Devices for pressure relief, ventilation, or drainage.
- § 18.29 Access openings and covers, including unused lead-entrance holes.
- § 18.30 Windows and lenses.
- § 18.31 Enclosures—joints and fastenings.
- § 18.32 Fastenings—additional requirements.
- § 18.33 Finish of surface joints.
- § 18.34 Motors.
- § 18.35 Portable (trailing) cables and cords.
- § 18.36 Cables between machine components.
- § 18.37 Lead entrances.
- § 18.38 Leads through common walls.
- § 18.39 Hose conduit.
- § 18.40 Cable clamps and grips.
- § 18.41 Plug and receptacle-type connectors.
- § 18.42 Explosion-proof distribution boxes.
- § 18.43 Explosion-proof splice boxes.
- § 18.44 Non-intrinsically safe battery-powered equipment.
- § 18.45 Cable reels.
- § 18.46 Headlights.
- § 18.47 Voltage limitation.
- § 18.48 Circuit-interrupting devices.
- § 18.49 Connection boxes on machines.
- § 18.50 Protection against external arcs and sparks.
- § 18.51 Electrical protection of circuits and equipment.
- § 18.52 Renewal of fuses.
- § 18.53 High-voltage longwall mining systems.
- § 18.54 High-voltage continuous mining machines.
- Subpart C Inspections and Tests
- § 18.60 Detailed inspection of components.
- § 18.61 Final inspection of complete machine.
- § 18.62 Tests to determine explosion-proof characteristics.
- § 18.63 [Reserved]
- § 18.65 Flame test of hose.
- § 18.66 Tests of windows and lenses.
- § 18.67 Static-pressure tests.
- § 18.68 Tests for intrinsic safety.
- § 18.69 Adequacy tests.
- Subpart D Machines Assembled With Certified or Explosion-Proof Components, Field Modifications of Approved Machines, and Permits To Use Experimental Equipment
- § 18.80 Approval of machines assembled with certified or explosion-proof components.
- § 18.81 Field modification of approved (permissible) equipment; application for approval of modification; approval of plans for modification before modification.
- § 18.82 Permit to use experimental electric face equipment in a gassy mine or tunnel.
- Appendix I Appendix I to Subpart D of Part 18
- Appendix II Appendix II to Subpart D of Part 18
- Subpart E Field Approval of Electrically Operated Mining Equipment
- § 18.90 Purpose.
- § 18.91 Electric equipment for which field approvals will be issued.
- § 18.92 Quality of material and design.
- § 18.93 Application for field approval; filing procedures.
- § 18.94 Application for field approval; contents of application.
- § 18.95 Approval of machines constructed of components approved, accepted or certified under Bureau of Mines Schedule 2D, 2E, 2F, or 2G.
- § 18.96 Preparation of machines for inspection; requirements.
- § 18.97 Inspection of machines; minimum requirements.
- § 18.98 Enclosures, joints, and fastenings; pressure testing.
- § 18.99 Notice of approval or disapproval; letters of approval and approval plates.
- Subpart F Voluntary Consensus Standards
- § 18.101 Acceptance and use of voluntary consensus standards.
- § 18.102 Approved (incorporated by reference) voluntary consensus standards.
- § 18.103 Review and update of applicable voluntary consensus standards.
- PART 19 ELECTRIC CAP LAMPS
- § 19.1 Purpose.
- § 19.2 [Reserved]
- § 19.3 Application procedures and requirements.
- § 19.4 Conditions governing investigations.
- § 19.5 General requirements for approval.
- § 19.6 Specific requirements for approval.
- § 19.7 Protection against explosion hazard.
- § 19.8 Protection against bodily hazard.
- § 19.9 Performance.
- § 19.10 Material required for MSHA records.
- § 19.11 How approvals are granted.
- § 19.12 Wording, purpose, and use of approval plate.
- § 19.13 Instructions for handling future changes in lamp design.
- PART 20 ELECTRIC MINE LAMPS OTHER THAN STANDARD CAP LAMPS
- § 20.0 Compliance with the requirements necessary for obtaining approval.
- § 20.1 Purpose.
- § 20.2 Definitions.
- § 20.3 Application procedures and requirements.
- § 20.4 [Reserved]
- § 20.5 Conditions governing investigations.
- § 20.6 General requirements.
- § 20.7 Specific requirements.
- § 20.8 Class 1 lamps.
- § 20.9 Class 2 lamps.
- § 20.10 Tests (class 1 and 2 lamps).
- § 20.11 Material required for MSHA records.
- § 20.12 How approvals are granted.
- § 20.13 Approval plate.
- § 20.14 Instructions for handling future changes in lamp design.
- PART 22 PORTABLE METHANE DETECTORS
- § 22.0 Compliance with the requirements necessary for obtaining approval.
- § 22.1 Purpose.
- § 22.2 Definitions.
- § 22.3 [Reserved]
- § 22.4 Application procedures and requirements.
- § 22.5 Conditions governing investigations.
- § 22.6 General requirements.
- § 22.7 Specific requirements.
- § 22.8 Material required for MSHA records.
- § 22.9 How approvals are granted.
- § 22.10 Approval plate.
- § 22.11 Instructions on handling future changes in design.
- PART 23 TELEPHONES AND SIGNALING DEVICES
- § 23.1 Purpose.
- § 23.2 Definitions.
- § 23.3 Application procedures and requirements.
- § 23.4 [Reserved]
- § 23.5 Conditions governing investigations.
- § 23.6 General requirements for approval.
- § 23.7 Specific requirements for approval.
- § 23.8 Inspection and tests.
- § 23.9 Special requirements for complete devices.
- § 23.10 Material required for MSHA records.
- § 23.11 How approvals are granted.
- § 23.12 Wording, purpose, and use of approval plate.
- § 23.13 Withdrawal of approval.
- § 23.14 Instructions for handling future changes in design.
- PART 27 METHANE-MONITORING SYSTEMS
- Subpart A General Provisions
- § 27.1 Purpose.
- § 27.2 Definitions.
- § 27.3 Consultation.
- § 27.4 Application procedures and requirements.
- § 27.5 Letter of certification.
- § 27.6 Certification of components.
- § 27.7 Certification plate or label.
- § 27.8 [Reserved]
- § 27.9 Date for conducting tests.
- § 27.10 Conduct of investigations, tests, and demonstrations.
- § 27.11 Extension of certification.
- § 27.12 Withdrawal of certification.
- Subpart B Construction and Design Requirements
- § 27.20 Quality of material, workmanship, and design.
- § 27.21 Methane-monitoring system.
- § 27.22 Methane detector component.
- § 27.23 Automatic warning device.
- § 27.24 Power-shutoff component.
- Subpart C Test Requirements
- § 27.30 Inspection.
- § 27.31 Testing methods.
- § 27.32 Tests to determine performance of the system.
- § 27.33 Test to determine explosion-proof construction.
- § 27.34 Test for intrinsic safety.
- § 27.35 Tests to determine life of critical components and subassemblies.
- § 27.36 Test for adequacy of electrical insulation and clearances.
- § 27.37 Tests to determine adequacy of safety devices for bulbs.
- § 27.38 Tests to determine adequacy of windows and lenses.
- § 27.39 Tests to determine resistance to vibration.
- § 27.40 Test to determine resistance to dust.
- § 27.41 Test to determine resistance to moisture.
- PART 28 FUSES FOR USE WITH DIRECT CURRENT IN PROVIDING SHORT-CIRCUIT PROTECTION FOR TRAILING CABLES IN COAL MINES
- Subpart A General Provisions
- § 28.1 Purpose.
- § 28.2 Approved fuses.
- § 28.3 Installation, use, and maintenance of approved fuses.
- § 28.4 Definitions.
- Subpart B Application for Approval
- § 28.10 Application procedures.
- Subpart C Approval and Disapproval
- § 28.20 Certificates of approval; scope of approval.
- § 28.21 Certificates of approval; contents.
- § 28.22 Notice of disapproval.
- § 28.23 Approval labels or markings; approval of contents; use.
- § 28.24 Revocation of certificates of approval.
- § 28.25 Changes or modifications of approved fuses; issuance of modification of certificate of approval.
- Subpart D Quality Control
- § 28.30 Quality control plans; filing requirements.
- § 28.31 Quality control plans; contents.
- § 28.32 Proposed quality control plans; approval by MSHA.
- § 28.33 Quality control test methods, equipment, and records; review by MSHA; revocation of approval.
- Subpart E Construction, Performance, and Testing Requirements
- § 28.40 Construction and performance requirements; general.
- § 28.41 Testing requirements; general.
- PART 33 DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL MINES
- Subpart A General Provisions
- § 33.1 Purpose.
- § 33.2 Definitions.
- § 33.3 Consultation.
- § 33.4 Types of dust collectors for which certificates of approval may be granted.
- § 33.5 [Reserved]
- § 33.6 Application procedures and requirements.
- § 33.7 Date for conducting tests.
- § 33.8 Conduct of investigations, tests, and demonstrations.
- § 33.9 Certification of dust-collecting systems.
- § 33.10 Certificates of approval or performance.
- § 33.11 Approval plates.
- § 33.12 Changes after certification.
- § 33.13 Withdrawal of certification.
- Subpart B Dust-Collector Requirements
- § 33.20 Design and construction.
- § 33.21 Modification of test equipment.
- § 33.22 Mode of use.
- § 33.23 Mechanical positioning of parts.
- Subpart C Test Requirements
- § 33.30 Test site.
- § 33.31 Test space.
- § 33.32 Determination of dust concentration.
- § 33.33 Allowable limits of dust concentration.
- § 33.34 Drilling test.
- § 33.35 Methods of drilling; dust-collector unit.
- § 33.36 Method of drilling; combination unit or dust-collecting system.
- § 33.37 Test procedure.
- § 33.38 Electrical parts.
- PART 35 FIRE-RESISTANT HYDRAULIC FLUIDS
- Subpart A General Provisions
- § 35.1 Purpose.
- § 35.2 Definitions.
- § 35.3 Consultation.
- § 35.4 Types of hydraulic fluid for which certificates of approval may be granted.
- § 35.5 [Reserved]
- § 35.6 Application procedures and requirements.
- § 35.7 Date for conducting tests.
- § 35.8 Conduct of investigations, tests, and demonstrations.
- § 35.9 Certificates of approval.
- § 35.10 Approval labels or markings.
- § 35.11 Material required for record.
- § 35.12 Changes after certification.
- § 35.13 Withdrawal of certification.
- Subpart B Test Requirements
- § 35.20 Autogenous-ignition temperature test.
- § 35.21 Temperature-pressure spray-ignition tests.
- § 35.22 Test to determine effect of evaporation on flammability.
- § 35.23 Performance required for certification.
- PART 36 APPROVAL REQUIREMENTS FOR PERMISSIBLE MOBILE DIESEL-POWERED TRANSPORTATION EQUIPMENT
- Subpart A General Provisions
- § 36.1 Purpose.
- § 36.2 Definitions.
- § 36.3 Consultation.
- § 36.4 Mobile diesel-powered transportation equipment for which certificates of approval may be granted.
- § 36.5 Letters of certification.
- § 36.6 Application procedures and requirements.
- § 36.7 [Reserved]
- § 36.8 Date for conducting tests.
- § 36.9 Conduct of investigations, tests, and demonstrations.
- § 36.10 Certificate of approval.
- § 36.11 Approval plates.
- § 36.12 Changes after certification.
- § 36.13 Withdrawal of certification.
- Subpart B Construction and Design Requirements
- § 36.20 Quality of material, workmanship, and design.
- § 36.21 Engine for equipment considered for certification.
- § 36.22 Fuel-injection system.
- § 36.23 Engine intake system.
- § 36.24 Engine joints.
- § 36.25 Engine exhaust system.
- § 36.26 Composition of exhaust gas.
- § 36.27 Fuel-supply system.
- § 36.28 Signal or warning device.
- § 36.29 Brakes.
- § 36.30 Rerailing device.
- § 36.31 Fire extinguisher.
- § 36.32 Electrical components and systems.
- § 36.33 Headlights and fixtures.
- Subpart C Test Requirements
- § 36.40 Test site.
- § 36.41 Testing methods.
- § 36.42 Inspection.
- § 36.43 Determination of exhaust-gas composition.
- § 36.44 Maximum allowable fuel:air ratio.
- § 36.45 Quantity of ventilating air.
- § 36.46 Explosion tests of intake and exhaust systems.
- § 36.47 Tests of exhaust-gas cooling system.
- § 36.48 Tests of surface temperature of engine and components of the cooling system.
- § 36.49 Tests of exhaust-gas dilution system.
- § 36.50 Tests of fuel tank.
- S C SUBCHAPTERS C-F [RESERVED]
- SUBCHAPTER G FILING AND OTHER ADMINISTRATIVE REQUIREMENTS
- PART 40 REPRESENTATIVE OF MINERS
- § 40.1 Definitions.
- § 40.2 Requirements.
- § 40.3 Filing procedures.
- § 40.4 Posting at mine.
- § 40.5 Termination of designation as representative of miners.
- PART 41 NOTIFICATION OF LEGAL IDENTITY
- Subpart A Definitions
- § 41.1 Definitions.
- Subpart B Notification of Legal Identity
- § 41.10 Scope.
- § 41.11 Notification by operator.
- § 41.12 Changes; notification by operator.
- § 41.13 Failure to notify.
- Subpart C Operator's Report to the Mine Safety and Health Administration
- § 41.20 Legal identity report.
- § 41.30 Address of record and telephone number.
- PART 42 NATIONAL MINE HEALTH AND SAFETY ACADEMY
- A Subpart A [Reserved]
- Subpart B Tuition Fees
- § 42.10 Tuition fees.
- § 42.20 Schedule of fees.
- § 42.30 Procedure for payment.
- § 42.40 Refunds.
- Subpart C Room and Board
- § 42.50 Charges for room and board.
- PART 43 PROCEDURES FOR PROCESSING HAZARDOUS CONDITIONS COMPLAINTS
- Subpart A General
- § 43.1 Definitions.
- § 43.2 General.
- § 43.3 Purpose and scope of this part.
- Subpart B Special Inspections
- § 43.4 Requirements for giving notice.
- § 43.5 Action by the Secretary.
- § 43.6 Notice of negative finding.
- Subpart C Informal Review
- § 43.7 Informal review upon written notice given to an inspector on the mine premises.
- § 43.8 Informal review upon issuance of a notice of negative finding.
- PART 44 RULES OF PRACTICE FOR PETITIONS FOR MODIFICATION OF MANDATORY SAFETY STANDARDS
- Subpart A General
- § 44.1 Scope and construction.
- § 44.2 Definitions.
- § 44.3 Parties.
- § 44.4 Standard of evaluation of petitions; effect of petitions granted.
- § 44.5 Notice of a granted petition for modification.
- § 44.6 Service.
- § 44.7 Filing.
- § 44.8 Ex parte communication.
- § 44.9 Posting of petition.
- Subpart B Initial Procedure for Petitions for Modification
- § 44.10 Filing of petition; service.
- § 44.11 Contents of petition.
- § 44.12 Procedure for public notice of petition received.
- § 44.13 Proposed decision.
- § 44.14 Request for hearing.
- § 44.15 Referral to Chief Administrative Law Judge.
- § 44.16 Application for temporary relief; relief to give effect to the proposed decision and order.
- Subpart C Hearings
- § 44.20 Designation of administrative law judge.
- § 44.21 Filing and form of documents.
- § 44.22 Administrative law judges; powers and duties.
- § 44.23 Prehearing conferences.
- § 44.24 Discovery.
- § 44.25 Depositions.
- § 44.26 Subpoenas; witness fees.
- § 44.27 Consent findings and rules or orders.
- § 44.28 Notice of hearing.
- § 44.29 Motions.
- § 44.30 Hearing procedures.
- § 44.31 Proposed findings of fact, conclusions, and orders.
- § 44.32 Initial decision.
- § 44.33 Departmental review.
- § 44.34 Transmission of record.
- § 44.35 Decision of the Assistant Secretary.
- Subpart D Summary Decisions
- § 44.40 Motion for summary decision.
- § 44.41 Summary decision.
- Subpart E Effect of Initial Decision
- § 44.50 Effect of appeal on initial decision.
- § 44.51 Finality for purposes of judicial review.
- § 44.52 Revocation of modification.
- § 44.53 Amended modification.
- PART 45 INDEPENDENT CONTRACTORS
- § 45.1 Scope and purpose.
- § 45.2 Definitions.
- § 45.3 Identification of independent contractors.
- § 45.4 Independent contractor register.
- § 45.5 Service of documents; independent contractors.
- § 45.6 Address of record and telephone number; independent contractors.
- SUBCHAPTER H EDUCATION AND TRAINING
- PART 46 TRAINING AND RETRAINING OF MINERS ENGAGED IN SHELL DREDGING OR EMPLOYED AT SAND, GRAVEL, SURFACE STONE, SURFACE CLAY, COLLOIDAL PHOSPHATE, OR SURFACE LIMESTONE MINES.
- § 46.1 Scope.
- § 46.2 Definitions.
- § 46.3 Training plans.
- § 46.4 Training plan implementation.
- § 46.5 New miner training.
- § 46.6 Newly hired experienced miner training.
- § 46.7 New task training.
- § 46.8 Annual refresher training.
- § 46.9 Records of training.
- § 46.10 Compensation for training.
- § 46.11 Site-specific hazard awareness training.
- § 46.12 Responsibility for independent contractor training.
- PART 47 HAZARD COMMUNICATION (HazCom)
- Subpart A Purpose, Scope, Applicability, and Initial Miner Training
- § 47.1 Purpose of a HazCom standard; applicability.
- § 47.2 Operators and chemicals covered; initial miner training.
- Subpart B Definitions
- § 47.11 Definitions of terms used in this part.
- Subpart C Hazard Determination
- § 47.21 Identifying hazardous chemicals.
- Subpart D HazCom Program
- § 47.31 Requirement for a HazCom program.
- § 47.32 HazCom program contents.
- Subpart E Container Labels and Other Forms of Warning
- § 47.41 Requirement for container labels.
- § 47.42 Label contents.
- § 47.43 Label alternatives.
- § 47.44 Temporary, portable containers.
- Subpart F Material Safety Data Sheets (MSDS)
- § 47.51 Requirement for an MSDS.
- § 47.52 MSDS contents.
- § 47.53 Alternative for hazardous waste.
- § 47.54 Availability of an MSDS.
- § 47.55 Retaining an MSDS.
- G Subpart G [Reserved]
- Subpart H Making HazCom Information Available
- § 47.71 Access to HazCom materials.
- § 47.72 Cost for copies.
- § 47.73 Providing labels and MSDSs to customers.
- Subpart I Trade Secret Hazardous Chemical
- § 47.81 Provisions for withholding trade secrets.
- § 47.82 Disclosure of information to MSHA.
- § 47.83 Disclosure in a medical emergency.
- § 47.84 Non-emergency disclosure.
- § 47.85 Confidentiality agreement and remedies.
- § 47.86 Denial of a written request for disclosure.
- § 47.87 Review of denial.
- Subpart J Exemptions
- § 47.91 Exemptions from the HazCom standard.
- § 47.92 Exemptions from labeling.
- PART 48 TRAINING AND RETRAINING OF MINERS
- Subpart A Training and Retraining of Underground Miners
- § 48.1 Scope.
- § 48.2 Definitions.
- § 48.3 Training plans; time of submission; where filed; information required; time for approval; method for disapproval; commencement of training; approval of instructors.
- § 48.4 Cooperative training program.
- § 48.5 Training of new miners; minimum courses of instruction; hours of instruction.
- § 48.6 Experienced miner training.
- § 48.7 Training of miners assigned to a task in which they have had no previous experience; minimum courses of instruction.
- § 48.8 Annual refresher training of miners; minimum courses of instruction; hours of instruction.
- § 48.9 Records of training.
- § 48.10 Compensation for training.
- § 48.11 Hazard training.
- § 48.12 Appeals procedures.
- Subpart B Training and Retraining of Miners Working at Surface Mines and Surface Areas of Underground Mines
- § 48.21 Scope.
- § 48.22 Definitions.
- § 48.23 Training plans; time of submission; where filed; information required; time for approval; method for disapproval; commencement of training; approval of instructors.
- § 48.24 Cooperative training program.
- § 48.25 Training of new miners; minimum courses of instruction; hours of instruction.
- § 48.26 Experienced miner training.
- § 48.27 Training of miners assigned to a task in which they have had no previous experience; minimum courses of instruction.
- § 48.28 Annual refresher training of miners; minimum courses of instruction; hours of instruction.
- § 48.29 Records of training.
- § 48.30 Compensation for training.
- § 48.31 Hazard training.
- § 48.32 Appeals procedures.
- PART 49 MINE RESCUE TEAMS
- Subpart A Mine Rescue Teams for Underground Metal and Nonmetal Mines
- § 49.1 Purpose and scope.
- § 49.2 Availability of mine rescue teams.
- § 49.3 Alternative mine rescue capability for small and remote mines.
- § 49.4 Alternative mine rescue capability for special mining conditions.
- § 49.5 Mine rescue station.
- § 49.6 Equipment and maintenance requirements.
- § 49.7 Physical requirements for mine rescue team.
- § 49.8 Training for mine rescue teams.
- § 49.9 Mine emergency notification plan.
- Subpart B Mine Rescue Teams for Underground Coal Mines
- § 49.11 Purpose and scope.
- § 49.12 Availability of mine rescue teams.
- § 49.13 Alternative mine rescue capability for small and remote mines.
- § 49.14 [Reserved]
- § 49.15 Mine rescue station.
- § 49.16 Equipment and maintenance requirements.
- § 49.17 Physical requirements for mine rescue team.
- § 49.18 Training for mine rescue teams.
- § 49.19 Mine emergency notification plan.
- § 49.20 Requirements for all coal mines.
- § 49.30 Requirements for small coal mines.
- § 49.40 Requirements for large coal mines.
- § 49.50 Certification of coal mine rescue teams.
- § 49.60 Requirements for a local mine rescue contest.
- SUBCHAPTER I ACCIDENTS, INJURIES, ILLNESSES, EMPLOYMENT, AND PRODUCTION IN MINES
- PART 50 NOTIFICATION, INVESTIGATION, REPORTS AND RECORDS OF ACCIDENTS, INJURIES, ILLNESSES, EMPLOYMENT, AND COAL PRODUCTION IN MINES
- Subpart A General
- § 50.1 Purpose and scope.
- § 50.2 Definitions.
- Subpart B Notification, Investigation, Preservation of Evidence
- § 50.10 Immediate notification.
- § 50.11 Investigation.
- § 50.12 Preservation of evidence.
- Subpart C Reporting of Accidents, Injuries, and Illnesses
- § 50.20 Preparation and submission of MSHA Report Form 7000-1—Mine Accident, Injury, and Illness Report.
- § 50.20-1 General instructions for completing MSHA Form 7000-1.
- § 50.20-2 Criteria—“Transfer to another job.”
- § 50.20-3 Criteria—Differences between medical treatment and first aid.
- § 50.20-4 Criteria—MSHA Form 7000-1, Section A.
- § 50.20-5 Criteria—MSHA Form 7000-1, Section B.
- § 50.20-6 Criteria—MSHA Form 7000-1, Section C.
- § 50.20-7 Criteria—MSHA Form 7000-1, Section D.
- Subpart D Quarterly Employment and Coal Production Report
- § 50.30 Preparation and submission of MSHA Form 7000-2—Quarterly Employment and Coal Production Report.
- § 50.30-1 General instructions for completing MSHA Form 7000-2.
- Subpart E Maintenance of Records; Verification of Information
- § 50.40 Maintenance of records.
- § 50.41 Verification of reports.
- J [RESERVED] SUBCHAPTER J [RESERVED]
- SUBCHAPTER K METAL AND NONMETAL MINE SAFETY AND HEALTH
- PART 56 SAFETY AND HEALTH STANDARDS—SURFACE METAL AND NONMETAL MINES
- Subpart A General
- § 56.1 Purpose and scope.
- § 56.2 Definitions.
- 36 Procedures
- § 56.1000 Notification of commencement of operations and closing of mines.
- Subpart B Ground Control
- § 56.3000 Definitions.
- 37 Mining Methods
- § 56.3130 Wall, bank, and slope stability.
- § 56.3131 Pit or quarry wall perimeter.
- 38 Scaling and Support
- § 56.3200 Correction of hazardous conditions.
- § 56.3201 Location for performing scaling.
- § 56.3202 Scaling tools.
- § 56.3203 Rock fixtures.
- 39 Precautions
- § 56.3400 Secondary breakage.
- § 56.3401 Examination of ground conditions.
- § 56.3430 Activity between machinery or equipment and the highwall or bank.
- Subpart C Fire Prevention and Control
- § 56.4000 Definitions.
- § 56.4011 Abandoned electric circuits.
- 40 Prohibitions/Precautions/Housekeeping
- § 56.4100 Smoking and use of open flames.
- § 56.4101 Warning signs.
- § 56.4102 Spillage and leakage.
- § 56.4103 Fueling internal combustion engines.
- § 56.4104 Combustible waste.
- § 56.4130 Electric substations and liquid storage facilities.
- 41 Firefighting Equipment
- § 56.4200 General requirements.
- § 56.4201 Inspection.
- § 56.4202 Fire hydrants.
- § 56.4203 Extinguisher recharging or replacement.
- § 56.4230 Self-propelled equipment.
- 42 Firefighting Procedures/Alarms/Drills
- § 56.4330 Firefighting, evacuation, and rescue procedures.
- § 56.4331 Firefighting drills.
- 43 Flammable and Combustible Liquids and Gases
- § 56.4400 Use restrictions.
- § 56.4401 Storage tank foundations.
- § 56.4402 Safety can use.
- § 56.4430 Storage facilities.
- 44 Installation/Construction/Maintenance
- § 56.4500 Heat sources.
- § 56.4501 Fuel lines.
- § 56.4502 Battery-charging stations.
- § 56.4503 Conveyor belt slippage.
- § 56.4530 Exits.
- § 56.4531 Flammable or combustible liquid storage buildings or rooms.
- 45 Welding/Cutting/Compressed Gases
- § 56.4600 Extinguishing equipment.
- § 56.4601 Oxygen cylinder storage.
- § 56.4602 Gauges and regulators.
- § 56.4603 Closure of valves.
- § 56.4604 Preparation of pipelines or containers.
- Appendix I to Subpart C of Part 56 National Consensus Standards
- Subpart D Air Quality and Physical Agents
- 46 Air Quality
- § 56.5001 Exposure limits for airborne contaminants.
- § 56.5001T Exposure limits for airborne contaminants.
- § 56.5002 Exposure monitoring.
- § 56.5005 Control of exposure to airborne contaminants.
- § 56.5005T Control of exposure to airborne contaminants.
- § 56.5006 Restricted use of chemicals.
- Subpart E Explosives
- § 56.6000 Definitions.
- 47 Storage
- § 56.6100 Separation of stored explosive material.
- § 56.6101 Areas around explosive material storage facilities.
- § 56.6102 Explosive material storage practices.
- § 56.6130 Explosive material storage facilities.
- § 56.6131 Location of explosive material storage facilities.
- § 56.6132 Magazine requirements.
- § 56.6133 Powder chests.
- 48 Transportation
- § 56.6200 Delivery to storage or blast site areas.
- § 56.6201 Separation of transported explosive material.
- § 56.6202 Vehicles.
- § 56.6203 Locomotives.
- § 56.6204 Hoists.
- § 56.6205 Conveying explosives by hand.
- 49 Use
- § 56.6300 Control of blasting operations.
- § 56.6301 Blasthole obstruction check.
- § 56.6302 Separation of explosive material.
- § 56.6303 Initiation preparation.
- § 56.6304 Primer protection.
- § 56.6305 Unused explosive material.
- § 56.6306 Loading, blasting, and security.
- § 56.6307 Drill stem loading.
- § 56.6308 Initiation systems.
- § 56.6309 Fuel oil requirements for ANFO.
- § 56.6310 Misfire waiting period.
- § 56.6311 Handling of misfires.
- § 56.6312 Secondary blasting.
- 50 Electric Blasting
- § 56.6400 Compatibility of electric detonators.
- § 56.6401 Shunting.
- § 56.6402 Deenergized circuits near detonators.
- § 56.6403 Branch circuits.
- § 56.6404 Separation of blasting circuits from power source.
- § 56.6405 Firing devices.
- § 56.6406 Duration of current flow.
- § 56.6407 Circuit testing.
- 51 Nonelectric Blasting
- § 56.6500 Damaged initiating material.
- § 56.6501 Nonelectric initiation systems.
- § 56.6502 Safety fuse.
- 52 Extraneous Electricity
- § 56.6600 Loading practices.
- § 56.6601 Grounding.
- § 56.6602 Static electricity dissipation during loading.
- § 56.6603 Air gap.
- § 56.6604 Precautions during storms.
- § 56.6605 Isolation of blasting circuits.
- 53 Equipment/Tools
- § 56.6700 Nonsparking tools.
- § 56.6701 Tamping and loading pole requirements.
- 54 Maintenance
- § 56.6800 Storage facilities.
- § 56.6801 Vehicle repair.
- § 56.6802 Bulk delivery vehicles.
- § 56.6803 Blasting lines.
- 55 General Requirements
- § 56.6900 Damaged or deteriorated explosive material.
- § 56.6901 Black powder.
- § 56.6902 Excessive temperatures.
- § 56.6903 Burning explosive material.
- § 56.6904 Smoking and open flames.
- § 56.6905 Protection of explosive material.
- Subpart F Drilling and Rotary Jet Piercing
- 56 Drilling
- § 56.7002 Equipment defects.
- § 56.7003 Drill area inspection.
- § 56.7004 Drill mast.
- § 56.7005 Augers and drill stems.
- § 56.7008 Moving the drill.
- § 56.7009 Drill helpers.
- § 56.7010 Power failures.
- § 56.7011 Straightening crossed cables.
- § 56.7012 Tending drills in operation.
- § 56.7013 Covering or guarding drill holes.
- § 56.7018 Hand clearance.
- § 56.7050 Tool and drill steel racks.
- § 56.7051 Loose objects on the mast or drill platform.
- § 56.7052 Drilling positions.
- § 56.7053 Moving hand-held drills.
- § 56.7055 Intersecting holes.
- § 56.7056 Collaring in bootlegs.
- 57 Rotary Jet Piercing
- § 56.7801 Jet drills.
- § 56.7802 Oxygen hose lines.
- § 56.7803 Lighting the burner.
- § 56.7804 Refueling.
- § 56.7805 Smoking and open flames.
- § 56.7806 Oxygen intake coupling.
- § 56.7807 Flushing the combustion chamber.
- G Subpart G [Reserved]
- Subpart H Loading, Hauling, and Dumping
- 58 Traffic Safety
- § 56.9100 Traffic control.
- § 56.9101 Operating speeds and control of equipment.
- § 56.9102 Movement of independently operating rail equipment.
- § 56.9103 Clearance on adjacent tracks.
- § 56.9104 Railroad crossings.
- 59 Transportation of Persons and Materials
- § 56.9200 Transporting persons.
- § 56.9201 Loading, hauling, and unloading of equipment or supplies.
- § 56.9202 Loading and hauling large rocks.
- 60 Safety Devices, Provisions, and Procedures for Roadways, Railroads, and Loading and Dumping Sites
- § 56.9300 Berms or guardrails.
- § 56.9301 Dump site restraints.
- § 56.9302 Protection against moving or runaway railroad equipment.
- § 56.9303 Construction of ramps and dumping facilities.
- § 56.9304 Unstable ground.
- § 56.9305 Truck spotters.
- § 56.9306 Warning devices for restricted clearances.
- § 56.9307 Design, installation, and maintenance of railroads.
- § 56.9308 Switch throws.
- § 56.9309 Chute design.
- § 56.9310 Chute hazards.
- § 56.9311 Anchoring stationary sizing devices.
- § 56.9312 Working around drawholes.
- § 56.9313 Roadway maintenance.
- § 56.9314 Trimming stockpile and muckpile faces.
- § 56.9315 Dust control.
- § 56.9316 Notifying the equipment operator.
- § 56.9317 Suspended loads.
- § 56.9318 Getting on or off moving equipment.
- § 56.9319 Going over, under, or between railcars.
- § 56.9330 Clearance for surface equipment.
- Subpart I Aerial Tramways
- § 56.10001 Filling buckets.
- § 56.10002 Inspection and maintenance.
- § 56.10003 Correction of defects.
- § 56.10004 Brakes.
- § 56.10005 Track cable connections.
- § 56.10006 Tower guards.
- § 56.10007 Falling object protection.
- § 56.10008 Riding tramways.
- § 56.10009 Riding loaded buckets.
- § 56.10010 Starting precautions.
- Subpart J Travelways
- § 56.11001 Safe access.
- § 56.11002 Handrails and toeboards.
- § 56.11003 Construction and maintenance of ladders.
- § 56.11004 Portable rigid ladders.
- § 56.11005 Fixed ladder anchorage and toe clearance.
- § 56.11006 Fixed ladder landings.
- § 56.11007 Wooden components of ladders.
- § 56.11008 Restricted clearance.
- § 56.11009 Walkways along conveyors.
- § 56.11010 Stairstep clearance.
- § 56.11011 Use of ladders.
- § 56.11012 Protection for openings around travelways.
- § 56.11013 Conveyor crossovers.
- § 56.11014 Crossing moving conveyors.
- § 56.11016 Snow and ice on walkways and travelways.
- § 56.11017 Inclined fixed ladders.
- § 56.11025 Railed landings, backguards, and other protection for fixed ladders.
- § 56.11026 Protection for inclined fixed ladders.
- § 56.11027 Scaffolds and working platforms.
- Subpart K Electricity
- § 56.12001 Circuit overload protection.
- § 56.12002 Controls and switches.
- § 56.12003 Trailing cable overload protection.
- § 56.12004 Electrical conductors.
- § 56.12005 Protection of power conductors from mobile equipment.
- § 56.12006 Distribution boxes.
- § 56.12007 Junction box connection procedures.
- § 56.12008 Insulation and fittings for power wires and cables.
- § 56.12010 Isolation or insulation of communication conductors.
- § 56.12011 High-potential electrical conductors.
- § 56.12012 Bare signal wires.
- § 56.12013 Splices and repairs of power cables.
- § 56.12014 Handling energized power cables.
- § 56.12016 Work on electrically-powered equipment.
- § 56.12017 Work on power circuits.
- § 56.12018 Identification of power switches.
- § 56.12019 Access to stationary electrical equipment or switchgear.
- § 56.12020 Protection of persons at switchgear.
- § 56.12021 Danger signs.
- § 56.12022 Authorized persons at major electrical installations.
- § 56.12023 Guarding electrical connections and resistor grids.
- § 56.12025 Grounding circuit enclosures.
- § 56.12026 Grounding transformer and switchgear enclosures.
- § 56.12027 Grounding mobile equipment.
- § 56.12028 Testing grounding systems.
- § 56.12030 Correction of dangerous conditions.
- § 56.12032 Inspection and cover plates.
- § 56.12033 Hand-held electric tools.
- § 56.12034 Guarding around lights.
- § 56.12035 Weatherproof lamp sockets.
- § 56.12036 Fuse removal or replacement.
- § 56.12037 Fuses in high-potential circuits.
- § 56.12038 Attachment of trailing cables.
- § 56.12039 Protection of surplus trailing cables.
- § 56.12040 Installation of operating controls.
- § 56.12041 Design of switches and starting boxes.
- § 56.12042 Track bonding.
- § 56.12045 Overhead powerlines.
- § 56.12047 Guy wires.
- § 56.12048 Communication conductors on power poles.
- § 56.12050 Installation of trolley wires.
- § 56.12053 Circuits powered from trolley wires.
- § 56.12065 Short circuit and lightning protection.
- § 56.12066 Guarding trolley wires and bare powerlines.
- § 56.12067 Installation of transformers.
- § 56.12068 Locking transformer enclosures.
- § 56.12069 Lightning protection for telephone wires and ungrounded conductors.
- § 56.12071 Movement or operation of equipment near high-voltage power lines.
- Subpart L Compressed Air and Boilers
- § 56.13001 General requirements for boilers and pressure vessels.
- § 56.13010 Reciprocating-type air compressors.
- § 56.13011 Air receiver tanks.
- § 56.13012 Compressor air intakes.
- § 56.13015 Inspection of compressed-air receivers and other unfired pressure vessels.
- § 56.13017 Compressor discharge pipes.
- § 56.13019 Pressure system repairs.
- § 56.13020 Use of compressed air.
- § 56.13021 High-pressure hose connections.
- § 56.13030 Boilers.
- Subpart M Machinery and Equipment
- § 56.14000 Definitions.
- 61 Safety Devices and Maintenance Requirements
- § 56.14100 Safety defects; examination, correction and records.
- § 56.14101 Brakes.
- § 56.14102 Brakes for rail equipment.
- § 56.14103 Operators stations.
- § 56.14104 Tire repairs.
- § 56.14105 Procedures during repairs or maintenance.
- § 56.14106 Falling object protection.
- § 56.14107 Moving machine parts.
- § 56.14108 Overhead drive belts.
- § 56.14109 Unguarded conveyors with adjacent travelways.
- § 56.14110 Flying or falling materials.
- § 56.14111 Slusher, backlash guards and securing.
- § 56.14112 Construction and maintenance of guards.
- § 56.14113 Inclined conveyors: backstops or brakes.
- § 56.14114 Air valves for pneumatic equipment.
- § 56.14115 Stationary grinding machines.
- § 56.14116 Hand-held power tools.
- § 56.14130 Roll-over protective structures (ROPS) and seat belts.
- § 56.14131 Seat belts for haulage trucks.
- § 56.14132 Horns and backup alarms.
- 62 Safety Practices and Operational Procedures
- § 56.14200 Warnings prior to starting or moving equipment.
- § 56.14201 Conveyor start-up warnings.
- § 56.14202 Manual cleaning of conveyor pulleys.
- § 56.14203 Application of belt dressing.
- § 56.14204 Machinery lubrication.
- § 56.14205 Machinery, equipment, and tools.
- § 56.14206 Securing movable parts.
- § 56.14207 Parking procedures for unattended equipment.
- § 56.14208 Warning devices.
- § 56.14209 Safety procedures for towing.
- § 56.14210 Movement of dippers, buckets, loading booms, or suspended loads.
- § 56.14211 Blocking equipment in a raised position.
- § 56.14212 Chains, ropes, and drive belts.
- § 56.14213 Ventilation and shielding for welding.
- § 56.14214 Train warnings.
- § 56.14215 Coupling or uncoupling cars.
- § 56.14216 Backpoling.
- § 56.14217 Securing parked railcars.
- § 56.14218 Movement of equipment on adjacent tracks.
- § 56.14219 Brakeman signals.
- Appendix I to Subpart M of Part 56 National Consensus Standards
- Subpart N Personal Protection
- § 56.15001 First-aid materials.
- § 56.15002 Hard hats.
- § 56.15003 Protective footwear.
- § 56.15004 Eye protection.
- § 56.15005 Safety belts and lines.
- § 56.15006 Protective equipment and clothing for hazards and irritants.
- § 56.15007 Protective equipment or clothing for welding, cutting, or working with molten metal.
- § 56.15014 Eye protection when operating grinding wheels.
- § 56.15020 Life jackets and belts.
- Subpart O Materials Storage and Handling
- § 56.16001 Stacking and storage of materials.
- § 56.16002 Bins, hoppers, silos, tanks, and surge piles.
- § 56.16003 Storage of hazardous materials.
- § 56.16004 Containers for hazardous materials.
- § 56.16005 Securing gas cylinders.
- § 56.16006 Protection of gas cylinder valves.
- § 56.16007 Taglines, hitches, and slings.
- § 56.16009 Suspended loads.
- § 56.16010 Dropping materials from overhead.
- § 56.16011 Riding hoisted loads or on the hoist hook.
- § 56.16012 Storage of incompatible substances.
- § 56.16013 Working with molten metal.
- § 56.16014 Operator-carrying overhead cranes.
- § 56.16015 Work or travel on overhead crane bridges.
- § 56.16016 Lift trucks.
- Subpart P Illumination
- § 56.17001 Illumination of surface working areas.
- Subpart Q Safety Programs
- § 56.18002 Examination of working places.
- § 56.18006 New employees.
- § 56.18009 Designation of person in charge.
- § 56.18010 First aid.
- § 56.18012 Emergency telephone numbers.
- § 56.18013 Emergency communications system.
- § 56.18014 Emergency medical assistance and transportation.
- § 56.18020 Working alone.
- Subpart R Personnel Hoisting
- § 56.19000 Application.
- 63 Hoists
- § 56.19001 Rated capacities.
- § 56.19002 Anchoring.
- § 56.19003 Driving mechanism connections.
- § 56.19004 Brakes.
- § 56.19005 Locking mechanism for clutch.
- § 56.19006 Automatic hoist braking devices.
- § 56.19007 Overtravel and overspeed devices.
- § 56.19008 Friction hoist synchronizing mechanisms.
- § 56.19009 Position indicator.
- § 56.19010 Location of hoist controls.
- § 56.19011 Drum flanges.
- § 56.19012 Grooved drums.
- § 56.19013 Diesel- and other fuel-injection-powered hoists.
- § 56.19014 Friction hoist overtravel protection.
- § 56.19017 Emergency braking for electric hoists.
- § 56.19018 Overtravel by-pass switches.
- 64 Wire Ropes
- § 56.19021 Minimum rope strength.
- § 56.19022 Initial measurement.
- § 56.19023 Examinations.
- § 56.19024 Retirement criteria.
- § 56.19025 Load end attachments.
- § 56.19026 Drum end attachment.
- § 56.19027 End attachment retermination.
- § 56.19028 End attachment replacement.
- § 56.19030 Safety device attachments.
- 65 Headframes and Sheaves
- § 56.19035 Headframe design.
- § 56.19036 Headframe height.
- § 56.19037 Fleet angles.
- § 56.19038 Platforms around elevated head sheaves.
- 66 Conveyances
- § 56.19045 Metal bonnets.
- § 56.19049 Hoisting persons in buckets.
- § 56.19050 Bucket requirements.
- § 56.19054 Rope guides.
- 67 Hoisting Procedures
- § 56.19055 Availability of hoist operator for manual hoists.
- § 56.19056 Availability of hoist operator for automatic hoists.
- § 56.19057 Hoist operator's physical fitness.
- § 56.19058 Experienced hoist operators.
- § 56.19061 Maximum hoisting speeds.
- § 56.19062 Maximum acceleration and deceleration.
- § 56.19063 Persons allowed in hoist room.
- § 56.19065 Lowering conveyances by the brakes.
- § 56.19066 Maximum riders in a conveyance.
- § 56.19067 Trips during shift changes.
- § 56.19068 Orderly conduct in conveyances.
- § 56.19069 Entering and leaving conveyances.
- § 56.19070 Closing cage doors or gates.
- § 56.19071 Riding in skips or buckets.
- § 56.19072 Skips and cages in same compartment.
- § 56.19073 Hoisting during shift changes.
- § 56.19074 Riding the bail, rim, bonnet, or crosshead.
- § 56.19075 Use of open hooks.
- § 56.19076 Maximum speeds for hoisting persons in buckets.
- § 56.19077 Lowering buckets.
- § 56.19078 Hoisting buckets from the shaft bottom.
- § 56.19079 Blocking mine cars.
- § 56.19080 Hoisting tools, timbers, and other materials.
- § 56.19081 Conveyances not in use.
- § 56.19083 Overtravel backout device.
- 68 Signaling
- § 56.19090 Dual signaling systems.
- § 56.19091 Signaling instructions to hoist operator.
- § 56.19092 Signaling from conveyances.
- § 56.19093 Standard signal code.
- § 56.19094 Posting signal code.
- § 56.19095 Location of signal devices.
- § 56.19096 Familiarity with signal code.
- 69 Shafts
- § 56.19100 Shaft landing gates.
- § 56.19101 Stopblocks and derail switches.
- § 56.19102 Shaft guides.
- § 56.19103 Dumping facilities and loading pockets.
- § 56.19104 Clearance at shaft stations.
- § 56.19105 Landings with more than one shaft entrance.
- § 56.19106 Shaft sets.
- § 56.19107 Precautions for work in compartment affected by hoisting operation.
- § 56.19108 Posting warning signs during shaft work.
- § 56.19109 Shaft inspection and repair.
- § 56.19110 Overhead protection for shaft deepening work.
- § 56.19111 Shaft-sinking ladders.
- 70 Inspection and Maintenance
- § 56.19120 Procedures for inspection, testing, and maintenance.
- § 56.19121 Recordkeeping.
- § 56.19122 Replacement parts.
- § 56.19129 Examinations and tests at beginning of shift.
- § 56.19130 Conveyance shaft test.
- § 56.19131 Hoist conveyance connections.
- § 56.19132 Safety catches.
- § 56.19133 Shaft.
- § 56.19134 Sheaves.
- § 56.19135 Rollers in inclined shafts.
- Subpart S Miscellaneous
- § 56.20001 Intoxicating beverages and narcotics.
- § 56.20002 Potable water.
- § 56.20003 Housekeeping.
- § 56.20005 Carbon tetrachloride.
- § 56.20008 Toilet facilities.
- § 56.20009 Tests for explosive dusts.
- § 56.20010 Retaining dams.
- § 56.20011 Barricades and warning signs.
- § 56.20013 Waste receptacles.
- § 56.20014 Prohibited areas for food and beverages.
- Subpart T Safety Program for Surface Mobile Equipment
- § 56.23000 Purpose and scope.
- § 56.23001 Definitions.
- § 56.23002 Written safety program.
- § 56.23003 Requirements for written safety program.
- § 56.23004 Record and inspection.
- PART 57 SAFETY AND HEALTH STANDARDS—UNDERGROUND METAL AND NONMETAL MINES
- Subpart A General
- § 57.1 Purpose and scope.
- § 57.2 Definitions.
- 141 Procedures
- § 57.1000 Notification of commencement of operations and closing of mines.
- Subpart B Ground Control
- § 57.3000 Definitions.
- Scaling and Support Surface and Underground
- § 57.3200 Correction of hazardous conditions.
- § 57.3201 Location for performing scaling.
- § 57.3202 Scaling tools.
- § 57.3203 Rock fixtures.
- Scaling and Support Underground Only
- § 57.3360 Ground support use.
- Precautions Surface and Underground
- § 57.3400 Secondary breakage.
- § 57.3401 Examination of ground conditions.
- Precautions Surface Only
- § 57.3430 Activity between machinery or equipment and the highwall or bank.
- Precautions Underground Only
- § 57.3460 Maintenance between machinery or equipment and ribs.
- § 57.3461 Rock bursts.
- Subpart C Fire Prevention and Control
- § 57.4000 Definitions.
- § 57.4011 Abandoned electric circuits.
- § 57.4057 Underground trailing cables.
- 147 Prohibitions/Precautions/Housekeeping
- § 57.4100 Smoking and use of open flames.
- § 57.4101 Warning signs.
- § 57.4102 Spillage and leakage.
- § 57.4103 Fueling internal combustion engines.
- § 57.4104 Combustible waste.
- § 57.4130 Surface electric substations and liquid storage facilities.
- § 57.4131 Surface fan installations and mine openings.
- § 57.4160 Underground electric substations and liquid storage facilities.
- § 57.4161 Use of fire underground.
- 148 Firefighting Equipment
- § 57.4200 General requirements.
- § 57.4201 Inspection.
- § 57.4202 Fire hydrants.
- § 57.4203 Extinguisher recharging or replacement.
- § 57.4230 Surface self-propelled equipment.
- § 57.4260 Underground self-propelled equipment.
- § 57.4261 Shaft-station waterlines.
- § 57.4262 Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms, compressor rooms, and hoist rooms.
- § 57.4263 Underground belt conveyors.
- 149 Firefighting Procedures/Alarms/Drills
- § 57.4330 Surface firefighting, evacuation, and rescue procedures.
- § 57.4331 Surface firefighting drills.
- § 57.4360 Underground alarm systems.
- § 57.4361 Underground evacuation drills.
- § 57.4362 Underground rescue and firefighting operations.
- § 57.4363 Underground evacuation instruction.
- 150 Flammable and Combustible Liquids and Gases
- § 57.4400 Use restrictions.
- § 57.4401 Storage tank foundations.
- § 57.4402 Safety can use.
- § 57.4430 Surface storage facilities.
- § 57.4431 Surface storage restrictions.
- § 57.4460 Storage of flammable liquids underground.
- § 57.4461 Gasoline use restrictions underground.
- § 57.4462 Storage of combustible liquids underground.
- § 57.4463 Liquefied petroleum gas use underground.
- 151 Installation/Construction/Maintenance
- § 57.4500 Heat sources.
- § 57.4501 Fuel lines.
- § 57.4502 Battery-charging stations.
- § 57.4503 Conveyor belt slippage.
- § 57.4504 Fan installations.
- § 57.4505 Fuel lines to underground areas.
- § 57.4530 Exits for surface buildings and structures.
- § 57.4531 Surface flammable or combustible liquid storage buildings or rooms.
- § 57.4532 [Reserved]
- § 57.4533 Mine opening vicinity.
- § 57.4560 Mine entrances.
- § 57.4561 Stationary diesel equipment underground.
- 152 Welding/Cutting/Compressed Gases
- § 57.4600 Extinguishing equipment.
- § 57.4601 Oxygen cylinder storage.
- § 57.4602 Gauges and regulators.
- § 57.4603 Closure of valves.
- § 57.4604 Preparation of pipelines or containers.
- § 57.4660 Work in shafts, raises, or winzes and other activities involving hazard areas.
- 153 Ventilation Control Measures
- § 57.4760 Shaft mines.
- § 57.4761 Underground shops.
- Appendix I to Subpart C of Part 57 National Consensus Standards
- Subpart D Air Quality, Radiation, Physical Agents, and Diesel Particulate Matter
- Air Quality Surface and Underground
- § 57.5001 Exposure limits for airborne contaminants.
- § 57.5001T Exposure limits for airborne contaminants.
- § 57.5002 Exposure monitoring.
- § 57.5005 Control of exposure to airborne contaminants.
- § 57.5005T Control of exposure to airborne contaminants.
- § 57.5006 Restricted use of chemicals.
- Air Quality Surface Only [Reserved]
- Air Quality Underground Only
- § 57.5015 Oxygen deficiency.
- Radiation Underground Only
- § 57.5037 Radon daughter exposure monitoring.
- § 57.5038 Annual exposure limits.
- § 57.5039 Maximum permissible concentration.
- § 57.5040 Exposure records.
- § 57.5041 Smoking prohibition.
- § 57.5042 Revised exposure levels.
- § 57.5044 Respirators.
- § 57.5045 Posting of inactive workings.
- § 57.5046 Protection against radon gas.
- § 57.5047 Gamma radiation surveys.
- Diesel Particulate Matter Underground Only
- § 57.5060 Limit on exposure to diesel particulate matter.
- § 57.5061 Compliance determinations.
- § 57.5065 Fueling practices.
- § 57.5066 Maintenance standards.
- § 57.5067 Engines.
- § 57.5070 Miner training.
- § 57.5071 Exposure monitoring.
- § 57.5075 Diesel particulate records.
- Subpart E Explosives
- § 57.6000 Definitions.
- Storage Surface and Underground
- § 57.6100 Separation of stored explosive material.
- § 57.6101 Areas around explosive material storage facilities.
- § 57.6102 Explosive material storage practices.
- Storage Surface Only
- § 57.6130 Explosive material storage facilities.
- § 57.6131 Location of explosive material storage facilities.
- § 57.6132 Magazine requirements.
- § 57.6133 Powder chests.
- Storage Underground Only
- § 57.6160 Main facilities.
- § 57.6161 Auxiliary facilities.
- Transportation Surface and Underground
- § 57.6200 Delivery to storage or blast site areas.
- § 57.6201 Separation of transported explosive material.
- § 57.6202 Vehicles.
- § 57.6203 Locomotives.
- § 57.6204 Hoists.
- § 57.6205 Conveying explosives by hand.
- USE SURFACE AND UNDERGROUND
- § 57.6300 Control of blasting operations.
- § 57.6301 Blasthole obstruction check.
- § 57.6302 Separation of explosive material.
- § 57.6303 Initiation preparation.
- § 57.6304 Primer protection.
- § 57.6305 Unused explosive material.
- § 57.6306 Loading, blasting, and security.
- § 57.6307 Drill stem loading.
- § 57.6308 Initiation systems.
- § 57.6309 Fuel oil requirements for ANFO.
- § 57.6310 Misfire waiting period.
- § 57.6311 Handling of misfires.
- § 57.6312 Secondary blasting.
- Electric Blasting Surface and Underground
- § 57.6400 Compatibility of electric detonators.
- § 57.6401 Shunting.
- § 57.6402 Deenergized circuits near detonators.
- § 57.6403 Branch circuits.
- § 57.6404 Separation of blasting circuits from power source.
- § 57.6405 Firing devices.
- § 57.6406 Duration of current flow.
- § 57.6407 Circuit testing.
- Nonelectric Blasting Surface and Underground
- § 57.6500 Damaged initiating material.
- § 57.6501 Nonelectric initiation systems.
- § 57.6502 Safety fuse.
- Extraneous Electricity Surface and Underground
- § 57.6600 Loading practices.
- § 57.6601 Grounding.
- § 57.6602 Static electricity dissipation during loading.
- § 57.6603 Air gap.
- § 57.6604 Precautions during storms.
- § 57.6605 Isolation of blasting circuits.
- Equipment/Tools Surface and Underground
- § 57.6700 Nonsparking tools.
- § 57.6701 Tamping and loading pole requirements.
- Maintenance Surface and Underground
- § 57.6800 Storage facilities.
- § 57.6801 Vehicle repair.
- § 57.6802 Bulk delivery vehicles.
- § 57.6803 Blasting lines.
- General Requirements Surface and Underground
- § 57.6900 Damaged or deteriorated explosive material.
- § 57.6901 Black powder.
- § 57.6902 Excessive temperatures.
- § 57.6903 Burning explosive material.
- § 57.6904 Smoking and open flames.
- § 57.6905 Protection of explosive material.
- General Requirements Underground Only
- § 57.6960 Mixing of explosive material.
- Subpart F Drilling and Rotary Jet Piercing
- Drilling Surface Only
- § 57.7002 Equipment defects.
- § 57.7003 Drill area inspection.
- § 57.7004 Drill mast.
- § 57.7005 Augers and drill stems.
- § 57.7008 Moving the drill.
- § 57.7009 Drill helpers.
- § 57.7010 Power failures.
- § 57.7011 Straightening crossed cables.
- § 57.7012 Tending drills in operation.
- § 57.7013 Covering or guarding drill holes.
- § 57.7018 Hand clearance.
- Drilling Underground Only
- § 57.7028 Hand clearance.
- § 57.7032 Anchoring.
- Drilling Surface and Underground
- § 57.7050 Tool and drill steel racks.
- § 57.7051 Loose objects on the mast or drill platform.
- § 57.7052 Drilling positions.
- § 57.7053 Moving hand-held drills.
- § 57.7054 Starting or moving drill equipment.
- § 57.7055 Intersecting holes.
- § 57.7056 Collaring in bootlegs.
- Rotary Jet Piercing Surface Only
- § 57.7801 Jet drills.
- § 57.7802 Oxygen hose lines.
- § 57.7803 Lighting the burner.
- § 57.7804 Refueling.
- § 57.7805 Smoking and open flames.
- § 57.7806 Oxygen intake coupling.
- § 57.7807 Flushing the combustion chamber.
- Subpart G Ventilation
- 175 Surface and Underground
- § 57.8518 Main and booster fans.
- § 57.8519 Underground main fan controls.
- 176 Underground Only
- § 57.8520 Ventilation plan.
- § 57.8525 Main fan maintenance.
- § 57.8527 Oxygen-deficiency testing.
- § 57.8528 Unventilated areas.
- § 57.8529 Auxiliary fan systems.
- § 57.8531 Construction and maintenance of ventilation doors.
- § 57.8532 Opening and closing ventilation doors.
- § 57.8534 Shutdown or failure of auxiliary fans.
- § 57.8535 Seals.
- Subpart H Loading, Hauling, and Dumping
- 177 Traffic Safety
- § 57.9100 Traffic control.
- § 57.9101 Operating speeds and control of equipment.
- § 57.9102 Movement of independently operating rail equipment.
- § 57.9103 Clearance on adjacent tracks.
- § 57.9104 Railroad crossings.
- § 57.9160 Train movement during shift changes.
- 178 Transportation of Persons and Materials
- § 57.9200 Transporting persons.
- § 57.9201 Loading, hauling, and unloading of equipment or supplies.
- § 57.9202 Loading and hauling large rocks.
- § 57.9260 Supplies, materials, and tools on mantrips.
- § 57.9261 Transporting tools and materials on locomotives.
- 179 Safety Devices, Provisions, and Procedures for Roadways, Railroads, and Loading and Dumping Sites
- § 57.9300 Berms or guardrails.
- § 57.9301 Dump site restraints.
- § 57.9302 Protection against moving or runaway railroad equipment.
- § 57.9303 Construction of ramps and dumping facilities.
- § 57.9304 Unstable ground.
- § 57.9305 Truck spotters.
- § 57.9306 Warning devices for restricted clearances.
- § 57.9307 Design, installation, and maintenance of railroads.
- § 57.9308 Switch throws.
- § 57.9309 Chute design.
- § 57.9310 Chute hazards.
- § 57.9311 Anchoring stationary sizing devices.
- § 57.9312 Working around drawholes.
- § 57.9313 Roadway maintenance.
- § 57.9314 Trimming stockpile and muckpile faces.
- § 57.9315 Dust control.
- § 57.9316 Notifying the equipment operator.
- § 57.9317 Suspended loads.
- § 57.9318 Getting on or off moving equipment.
- § 57.9319 Going over, under, or between railcars.
- § 57.9330 Clearance for surface equipment.
- § 57.9360 Shelter holes.
- § 57.9361 Drawholes.
- § 57.9362 Protection of signalmen.
- Subpart I Aerial Tramways
- § 57.10001 Filling buckets.
- § 57.10002 Inspection and maintenance.
- § 57.10003 Correction of defects.
- § 57.10004 Brakes.
- § 57.10005 Track cable connections.
- § 57.10006 Tower guards.
- § 57.10007 Falling object protection.
- § 57.10008 Riding tramways.
- § 57.10009 Riding loaded buckets.
- § 57.10010 Starting precautions.
- Subpart J Travelways and Escapeways
- Travelways Surface and Underground
- § 57.11001 Safe access.
- § 57.11002 Handrails and toeboards.
- § 57.11003 Construction and maintenance of ladders.
- § 57.11004 Portable rigid ladders.
- § 57.11005 Fixed ladder anchorage and toe clearance.
- § 57.11006 Fixed ladder landings.
- § 57.11007 Wooden components of ladders.
- § 57.11008 Restricted clearance.
- § 57.11009 Walkways along conveyors.
- § 57.11010 Stairstep clearance.
- § 57.11011 Use of ladders.
- § 57.11012 Protection for openings around travelways.
- § 57.11013 Conveyor crossovers.
- § 57.11014 Crossing moving conveyors.
- § 57.11016 Snow and ice on walkways and travelways.
- § 57.11017 Inclined fixed ladders.
- Travelways Surface Only
- § 57.11025 Railed landings, backguards, and other protection for fixed ladders.
- § 57.11026 Protection for inclined fixed ladders.
- § 57.11027 Scaffolds and working platforms.
- Travelways Underground Only
- § 57.11036 Ladderway trap doors and guards.
- § 57.11037 Ladderway openings.
- § 57.11038 Entering a manway.
- § 57.11040 Inclined travelways.
- § 57.11041 Landings for inclined ladderways.
- Escapeways Underground Only
- § 57.11050 Escapeways and refuges.
- § 57.11051 Escape routes.
- § 57.11052 Refuge areas.
- § 57.11053 Escape and evacuation plans.
- § 57.11054 Communication with refuge chambers.
- § 57.11055 Inclined escapeways.
- § 57.11056 Emergency hoists.
- § 57.11058 Check-in, check-out system.
- § 57.11059 Respirable atmosphere for hoist operators underground.
- Subpart K Electricity
- 184 Surface and Underground
- § 57.12001 Circuit overload protection.
- § 57.12002 Controls and switches.
- § 57.12003 Trailing cable overload protection.
- § 57.12004 Electrical conductors.
- § 57.12005 Protection of power conductors from mobile equipment.
- § 57.12006 Distribution boxes.
- § 57.12007 Junction box connection procedures.
- § 57.12008 Insulation and fittings for power wires and cables.
- § 57.12010 Isolation or insulation of communication conductors.
- § 57.12011 High-potential electrical conductors.
- § 57.12012 Bare signal wires.
- § 57.12013 Splices and repairs of power cables.
- § 57.12014 Handling energized power cables.
- § 57.12016 Work on electrically-powered equipment.
- § 57.12017 Work on power circuits.
- § 57.12018 Identification of power switches.
- § 57.12019 Access to stationary electrical equipment or switchgear.
- § 57.12020 Protection of persons at switchgear.
- § 57.12021 Danger signs.
- § 57.12022 Authorized persons at major electrical installations.
- § 57.12023 Guarding electrical connections and resistor grids.
- § 57.12025 Grounding circuit enclosures.
- § 57.12026 Grounding transformer and switchgear enclosures.
- § 57.12027 Grounding mobile equipment.
- § 57.12028 Testing grounding systems.
- § 57.12030 Correction of dangerous conditions.
- § 57.12032 Inspection and cover plates.
- § 57.12033 Hand-held electric tools.
- § 57.12034 Guarding around lights.
- § 57.12035 Weatherproof lamp sockets.
- § 57.12036 Fuse removal or replacement.
- § 57.12037 Fuses in high-potential circuits.
- § 57.12038 Attachment of trailing cables.
- § 57.12039 Protection of surplus trailing cables.
- § 57.12040 Installation of operating controls.
- § 57.12041 Design of switches and starting boxes.
- § 57.12042 Track bonding.
- § 57.12045 Overhead powerlines.
- § 57.12047 Guy wires.
- § 57.12048 Communication conductors on power poles.
- § 57.12050 Installation of trolley wires.
- § 57.12053 Circuits powered from trolley wires.
- 185 Surface Only
- § 57.12065 Short circuit and lightning protection.
- § 57.12066 Guarding trolley wires and bare powerlines.
- § 57.12067 Installation of transformers.
- § 57.12068 Locking transformer enclosures.
- § 57.12069 Lightning protection for telephone wires and ungrounded conductors.
- § 57.12071 Movement or operation of equipment near high-voltage powerlines.
- 186 Underground Only
- § 57.12080 Bare conductor guards.
- § 57.12081 Bonding metal pipelines to ground return circuits.
- § 57.12082 Isolation of powerlines.
- § 57.12083 Support of power cables in shafts and boreholes.
- § 57.12084 Branch circuit disconnecting devices.
- § 57.12085 Transformer stations.
- § 57.12086 Location of trolley wire.
- § 57.12088 Splicing trailing cables.
- Subpart L Compressed Air and Boilers
- § 57.13001 General requirements for boilers and pressure vessels.
- § 57.13010 Reciprocating-type air compressors.
- § 57.13011 Air receiver tanks.
- § 57.13012 Compressor air intakes.
- § 57.13015 Inspection of compressed-air receivers and other unfired pressure vessels.
- § 57.13017 Compressor discharge pipes.
- § 57.13019 Pressure system repairs.
- § 57.13020 Use of compressed air.
- § 57.13021 High-pressure hose connections.
- § 57.13030 Boilers.
- Subpart M Machinery and Equipment
- § 57.14000 Definitions.
- 187 Safety Devices and Maintenance Requirements
- § 57.14100 Safety defects; examination, correction and records.
- § 57.14101 Brakes.
- § 57.14102 Brakes for rail equipment.
- § 57.14103 Operators' stations.
- § 57.14104 Tire repairs.
- § 57.14105 Procedures during repairs or maintenance.
- § 57.14106 Falling object protection.
- § 57.14107 Moving machine parts.
- § 57.14108 Overhead drive belts.
- § 57.14109 Unguarded conveyors with adjacent travelways.
- § 57.14110 Flying or falling materials.
- § 57.14111 Slusher, backlash guards and securing.
- § 57.14112 Construction and maintenance of guards.
- § 57.14113 Inclined conveyors: backstops or brakes.
- § 57.14114 Air valves for pneumatic equipment.
- § 57.14115 Stationary grinding machines.
- § 57.14116 Hand-held power tools.
- § 57.14130 Roll-over protective structures (ROPS) and seat belts for surface equipment.
- § 57.14131 Seat belts for surface haulage trucks.
- § 57.14132 Horns and backup alarms for surface equipment.
- § 57.14160 Mantrip trolley wire hazards underground.
- § 57.14161 Makeshift couplings.
- § 57.14162 Trip lights.
- 188 Safety Practices and Operational Procedures
- § 57.14200 Warnings prior to starting or moving equipment.
- § 57.14201 Conveyor start-up warnings.
- § 57.14202 Manual cleaning of conveyor pulleys.
- § 57.14203 Application of belt dressing.
- § 57.14204 Machinery lubrication.
- § 57.14205 Machinery, equipment, and tools.
- § 57.14206 Securing movable parts.
- § 57.14207 Parking procedures for unattended equipment.
- § 57.14208 Warning devices.
- § 57.14209 Safety procedures for towing.
- § 57.14210 Movement of dippers, buckets, loading booms, or suspended loads.
- § 57.14211 Blocking equipment in a raised position.
- § 57.14212 Chains, ropes, and drive belts.
- § 57.14213 Ventilation and shielding for welding.
- § 57.14214 Train warnings.
- § 57.14215 Coupling or uncoupling cars.
- § 57.14216 Backpoling.
- § 57.14217 Securing parked railcars.
- § 57.14218 Movement of equipment on adjacent tracks.
- § 57.14219 Brakeman signals.
- Appendix I to Subpart M of Part 57 National Consensus Standards
- Subpart N Personal Protection
- 189 Surface and Underground
- § 57.15001 First aid materials.
- § 57.15002 Hard hats.
- § 57.15003 Protective footwear.
- § 57.15004 Eye protection.
- § 57.15005 Safety belts and lines.
- § 57.15006 Protective equipment and clothing for hazards and irritants.
- § 57.15007 Protective equipment or clothing for welding, cutting, or working with molten metal.
- § 57.15014 Eye protection when operating grinding wheels.
- 190 Surface Only
- § 57.15020 Life jackets and belts.
- 191 Underground Only
- § 57.15030 Provision and maintenance of self-rescue devices.
- § 57.15031 Location of self-rescue devices.
- Subpart O Materials Storage and Handling
- § 57.16001 Stacking and storage of materials.
- § 57.16002 Bins, hoppers, silos, tanks, and surge piles.
- § 57.16003 Storage of hazardous materials.
- § 57.16004 Containers for hazardous materials.
- § 57.16005 Securing gas cylinders.
- § 57.16006 Protection of gas cylinder valves.
- § 57.16007 Taglines, hitches, and slings.
- § 57.16009 Suspended loads.
- § 57.16010 Dropping materials from overhead.
- § 57.16011 Riding hoisted loads or on the hoist hook.
- § 57.16012 Storage of incompatible substances.
- § 57.16013 Working with molten metal.
- § 57.16014 Operator-carrying overhead cranes.
- § 57.16015 Work or travel on overhead crane bridges.
- § 57.16016 Lift trucks.
- § 57.16017 Hoisting heavy equipment or material.
- Subpart P Illumination
- § 57.17001 Illumination of surface working areas.
- § 57.17010 Electric lamps.
- Subpart Q Safety Programs
- 192 Surface and Underground
- § 57.18002 Examination of working places.
- § 57.18006 New employees.
- § 57.18009 Designation of person in charge.
- § 57.18010 First aid.
- § 57.18012 Emergency telephone numbers.
- § 57.18013 Emergency communications system.
- § 57.18014 Emergency medical assistance and transportation.
- 193 Surface Only
- § 57.18020 Working alone.
- 194 Underground Only
- § 57.18025 Working alone.
- § 57.18028 Mine emergency and self-rescuer training.
- Subpart R Personnel Hoisting
- § 57.19000 Application.
- 195 Hoists
- § 57.19001 Rated capacities.
- § 57.19002 Anchoring.
- § 57.19003 Driving mechanism connections.
- § 57.19004 Brakes.
- § 57.19005 Locking mechanism for clutch.
- § 57.19006 Automatic hoist braking devices.
- § 57.19007 Overtravel and overspeed devices.
- § 57.19008 Friction hoist synchronizing mechanisms.
- § 57.19009 Position indicator.
- § 57.19010 Location of hoist controls.
- § 57.19011 Drum flanges.
- § 57.19012 Grooved drums.
- § 57.19013 Diesel- and other fuel-injection-powered hoists.
- § 57.19014 Friction hoist overtravel protection.
- § 57.19017 Emergency braking for electric hoists.
- § 57.19018 Overtravel by-pass switches.
- 196 Wire Ropes
- § 57.19019 Guide ropes.
- § 57.19021 Minimum rope strength.
- § 57.19022 Initial measurement.
- § 57.19023 Examinations.
- § 57.19024 Retirement criteria.
- § 57.19025 Load end attachments.
- § 57.19026 Drum end attachment.
- § 57.19027 End attachment retermination.
- § 57.19028 End attachment replacement.
- § 57.19030 Safety device attachments.
- 197 Headframes and Sheaves
- § 57.19035 Headframe design.
- § 57.19036 Headframe height.
- § 57.19037 Fleet angles.
- § 57.19038 Platforms around elevated head sheaves.
- 198 Conveyances
- § 57.19045 Metal bonnets.
- § 57.19049 Hoisting persons in buckets.
- § 57.19050 Bucket requirements.
- § 57.19054 Rope guides.
- 199 Hoisting Procedures
- § 57.19055 Availability of hoist operator for manual hoists.
- § 57.19056 Availability of hoist operator for automatic hoists.
- § 57.19057 Hoist operator's physical fitness.
- § 57.19058 Experienced hoist operators.
- § 57.19061 Maximum hoisting speeds.
- § 57.19062 Maximum acceleration and deceleration.
- § 57.19063 Persons allowed in hoist room.
- § 57.19065 Lowering conveyances by the brakes.
- § 57.19066 Maximum riders in a conveyance.
- § 57.19067 Trips during shift changes.
- § 57.19068 Orderly conduct in conveyances.
- § 57.19069 Entering and leaving conveyances.
- § 57.19070 Closing cage doors or gates.
- § 57.19071 Riding in skips or buckets.
- § 57.19072 Skips and cages in same compartment.
- § 57.19073 Hoisting during shift changes.
- § 57.19074 Riding the bail, rim, bonnet, or crosshead.
- § 57.19075 Use of open hooks.
- § 57.19076 Maximum speeds for hoisting persons in buckets.
- § 57.19077 Lowering buckets.
- § 57.19078 Hoisting buckets from the shaft bottom.
- § 57.19079 Blocking mine cars.
- § 57.19080 Hoisting tools, timbers, and other materials.
- § 57.19081 Conveyances not in use.
- § 57.19083 Overtravel backout device.
- 200 Signaling
- § 57.19090 Dual signaling systems.
- § 57.19091 Signaling instructions to hoist operator.
- § 57.19092 Signaling from conveyances.
- § 57.19093 Standard signal code.
- § 57.19094 Posting signal code.
- § 57.19095 Location of signal devices.
- § 57.19096 Familiarity with signal code.
- 201 Shafts
- § 57.19100 Shaft landing gates.
- § 57.19101 Stopblocks and derail switches.
- § 57.19102 Shaft guides.
- § 57.19103 Dumping facilities and loading pockets.
- § 57.19104 Clearance at shaft stations.
- § 57.19105 Landings with more than one shaft entrance.
- § 57.19106 Shaft sets.
- § 57.19107 Precautions for work in compartment affected by hoisting operation.
- § 57.19108 Posting warning signs during shaft work.
- § 57.19109 Shaft inspection and repair.
- § 57.19110 Overhead protection for shaft deepening work.
- § 57.19111 Shaft-sinking ladders.
- 202 Inspection and Maintenance
- § 57.19120 Procedures for inspection, testing, and maintenance.
- § 57.19121 Recordkeeping.
- § 57.19122 Replacement parts.
- § 57.19129 Examinations and tests at beginning of shift.
- § 57.19130 Conveyance shaft test.
- § 57.19131 Hoist conveyance connections.
- § 57.19132 Safety catches.
- § 57.19133 Shaft.
- § 57.19134 Sheaves.
- § 57.19135 Rollers in inclined shafts.
- Subpart S Miscellaneous
- § 57.20001 Intoxicating beverages and narcotics.
- § 57.20002 Potable water.
- § 57.20003 Housekeeping.
- § 57.20005 Carbon tetrachloride.
- § 57.20008 Toilet facilities.
- § 57.20009 Tests for explosive dusts.
- § 57.20010 Retaining dams.
- § 57.20011 Barricades and warning signs.
- § 57.20013 Waste receptacles.
- § 57.20014 Prohibited areas for food and beverages.
- § 57.20020 Unattended mine openings.
- § 57.20021 Abandoned mine openings.
- § 57.20031 Blasting underground in hazardous areas.
- § 57.20032 Two-way communication equipment for underground operations.
- Subpart T Safety Standards for Methane in Metal and Nonmetal Mines
- 203 General
- § 57.22001 Scope.
- § 57.22002 Definitions.
- 204 Mine Categorization
- § 57.22003 Mine category or subcategory.
- § 57.22004 Category placement or change in placement.
- § 57.22005 Notice and appeal of placement or change in placement.
- 205 Fire Prevention and Control
- § 57.22101 Smoking (I-A, II-A, III, and V-A mines).
- § 57.22102 Smoking (I-C mines).
- § 57.22103 Open flames (I-A, II-A, III, and V-A mines).
- § 57.22104 Open flames (I-C mines).
- § 57.22105 Smoking and open flames (IV mines).
- § 57.22106 Dust containing volatile matter (I-C mines).
- 206 Ventilation
- § 57.22201 Mechanical ventilation (I-A, I-B, I-C, II-A, II-B, III, IV, V-A, and V-B mines).
- § 57.22202 Main fans (I-A, I-B, I-C, II-A, III, V-A, and V-B mines).
- § 57.22203 Main fan operation (I-C mines).
- § 57.22204 Main fan operation and inspection (I-A, II-A, III, and V-A mines).
- § 57.22205 Doors on main fans (I-A, II-A, III, and V-A mines).
- § 57.22206 Main ventilation failure (I-A, II-A, III, and V-A mines).
- § 57.22207 Booster fans (I-A, II-A, III, and V-A mines).
- § 57.22208 Auxiliary fans (I-A, II-A, III, and V-A mines).
- § 57.22209 Auxiliary fans (I-C mines).
- § 57.22210 In-line filters (I-C mines).
- § 57.22211 Air flow (I-A mines).
- § 57.22212 Air flow (I-C, II-A, and V-A mines).
- § 57.22213 Air flow (III mines).
- § 57.22214 Changes in ventilation (I-A, II-A, III, and V-A mines).
- § 57.22215 Separation of intake and return air (I-A, II-A, III, and V-A mines).
- § 57.22216 Separation of intake and return air (I-C mines).
- § 57.22217 Seals and stoppings (I-A, I-B, and I-C mines).
- § 57.22218 Seals and stoppings (III, V-A, and V-B mines).
- § 57.22219 Seals and stoppings (II-A mines).
- § 57.22220 Air passing unsealed areas (I-A, II-A, III, and V-A mines).
- § 57.22221 Overcast and undercast construction (I-A, II-A, III, and V-A mines).
- § 57.22222 Ventilation materials (I-A, I-B, I-C, II-A, III, V-A, and V-B mines).
- § 57.22223 Crosscuts before abandonment (III mines).
- § 57.22224 Auxiliary equipment stations (I-A and III mines).
- § 57.22225 Auxiliary equipment stations (I-C mines).
- § 57.22226 Testing for methane (IV mines).
- § 57.22227 Approved testing devices (I-A, I-B, I-C, II-A, II-B, III, IV, V-A, and V-B mines).
- § 57.22228 Preshift examination (I-A, I-C, II-A, III, and V-A mines).
- § 57.22229 Weekly testing (I-A, III, and V-A mines).
- § 57.22230 Weekly testing (II-A mines).
- § 57.22231 Actions at 0.25 percent methane (I-B, II-B, V-B, and VI mines).
- § 57.22232 Actions at 0.5 percent methane (I-B, II-A, II-B, IV, V-B, and VI mines).
- § 57.22233 Actions at 0.5 percent methane (I-C mines).
- § 57.22234 Actions at 1.0 percent methane (I-A, I-B, III, V-A, and V-B mines).
- § 57.22235 Actions at 1.0 percent methane (I-C, II-A, II-B, and IV mines).
- § 57.22236 Actions at 1.0 percent methane (VI mines).
- § 57.22237 Actions at 2.0 to 2.5 percent methane in bleeder systems (I-A and III mines).
- § 57.22238 Actions at 2.0 percent methane (I-B, II-B, V-B, and VI mines).
- § 57.22239 Actions at 2.0 percent methane (IV mines).
- § 57.22240 Actions at 2.0 percent methane (V-A mines).
- § 57.22241 Advance face boreholes (I-C mines).
- 207 Equipment
- § 57.22301 Atmospheric monitoring systems (I-A, II-A, and V-A mines).
- § 57.22302 Approved equipment (I-A and V-A mines).
- § 57.22303 Approved equipment (I-C mines).
- § 57.22304 Approved equipment (II-A mines).
- § 57.22305 Approved equipment (III mines).
- § 57.22306 Methane monitors (I-A mines).
- § 57.22307 Methane monitors (II-A mines).
- § 57.22308 Methane monitors (III mines).
- § 57.22309 Methane monitors (V-A mines).
- § 57.22310 Electrical cables (I-C mines).
- § 57.22311 Electrical cables (II-A mines).
- § 57.22312 Distribution boxes (II-A and V-A mines).
- § 57.22313 Explosion-protection systems (I-C mines).
- § 57.22314 Flow-control devices (V-A and V-B mines).
- § 57.22315 Self-contained breathing apparatus (V-A mines).
- 208 Underground Retorts
- § 57.22401 Underground retorts (I-A and I-B mines).
- 209 Illumination
- § 57.22501 Personal electric lamps (I-A, I-B, I-C, II-A, II-B, III, IV, V-A, and V-B mines).
- 210 Explosives
- § 57.22601 Blasting from the surface (I-A mines).
- § 57.22602 Blasting from the surface (I-C mines).
- § 57.22603 Blasting from the surface (II-A mines).
- § 57.22604 Blasting from the surface (II-B mines).
- § 57.22605 Blasting from the surface (V-A mines).
- § 57.22606 Explosive materials and blasting units (III mines).
- § 57.22607 Blasting on shift (III mines).
- § 57.22608 Secondary blasting (I-A, II-A, and V-A mines).
- Appendix I to Subpart T of Part 57 Standard Applicability by Category or Subcategory
- Subpart U Safety Program for Surface Mobile Equipment
- § 57.23000 Purpose and scope.
- § 57.23001 Definitions.
- § 57.23002 Written safety program.
- § 57.23003 Requirements for written safety program.
- § 57.23004 Record and inspection.
- PART 58 HEALTH STANDARDS FOR METAL AND NONMETAL MINES
- Subpart A General
- § 58.1 Scope.
- B Subparts B-D [Reserved]
- Subpart E Miscellaneous
- § 58.610 Abrasive blasting.
- § 58.620 Drill dust control.
- L [RESERVED] SUBCHAPTER L [RESERVED]
- SUBCHAPTER M UNIFORM MINE HEALTH REGULATIONS
- PART 60 RESPIRABLE CRYSTALLINE SILICA
- § 60.1 Scope; compliance dates.
- § 60.2 Definitions.
- § 60.10 Permissible exposure limit (PEL).
- § 60.11 Methods of compliance.
- § 60.12 Exposure monitoring.
- § 60.13 Corrective actions.
- § 60.14 Respiratory protection.
- § 60.15 Medical surveillance for metal and nonmetal mines.
- § 60.16 Recordkeeping requirements.
- § 60.17 Severability.
- PART 62 OCCUPATIONAL NOISE EXPOSURE
- § 62.100 Purpose and scope; effective date.
- § 62.101 Definitions.
- § 62.110 Noise exposure assessment.
- § 62.120 Action level.
- § 62.130 Permissible exposure level.
- § 62.140 Dual hearing protection level.
- § 62.150 Hearing conservation program.
- § 62.160 Hearing protectors.
- § 62.170 Audiometric testing.
- § 62.171 Audiometric test procedures.
- § 62.172 Evaluation of audiograms.
- § 62.173 Follow-up evaluation when an audiogram is invalid.
- § 62.174 Follow-up corrective measures when a standard threshold shift is detected.
- § 62.175 Notification of results; reporting requirements.
- § 62.180 Training.
- § 62.190 Records.
- Appendix to Appendix to Part 62
- N [RESERVED] SUBCHAPTER N [RESERVED]
- SUBCHAPTER O COAL MINE SAFETY AND HEALTH
- PART 70 MANDATORY HEALTH STANDARDS—UNDERGROUND COAL MINES
- Subpart A General
- § 70.1 Scope.
- § 70.2 Definitions.
- Subpart B Dust Standards
- § 70.100 Respirable dust standards.
- § 70.101 [Reserved]
- Subpart C Sampling Procedures
- § 70.201 Sampling; general and technical requirements.
- § 70.202 Certified person; sampling.
- § 70.203 Certified person; maintenance and calibration.
- § 70.204 Approved sampling devices; maintenance and calibration.
- § 70.205 Approved sampling devices; operation; air flowrate.
- §§ 70.206-70.207 [Reserved]
- § 70.208 Quarterly sampling; mechanized mining units.
- § 70.209 Quarterly sampling; designated areas.
- § 70.210 Respirable dust samples; transmission by operator.
- § 70.211 Respirable dust samples; report to operator; posting.
- § 70.212 Status change reports.
- D Subpart D [Reserved]
- Subpart E Dust From Drilling Rock [Reserved]
- F Subparts F-S [Reserved]
- Subpart T Diesel Exhaust Gas Monitoring
- § 70.1900 Exhaust Gas Monitoring.
- PART 71 MANDATORY HEALTH STANDARDS—SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES
- Subpart A General
- § 71.1 Scope.
- § 71.2 Definitions.
- Subpart B Dust Standards
- § 71.100 Respirable dust standard.
- § 71.101 [Reserved]
- Subpart C Sampling Procedures
- § 71.201 Sampling; general and technical requirements.
- § 71.202 Certified person; sampling.
- § 71.203 Certified person; maintenance and calibration.
- § 71.204 Approved sampling devices; maintenance and calibration.
- § 71.205 Approved sampling devices; operation; air flowrate.
- § 71.206 Quarterly sampling; designated work positions.
- § 71.207 Respirable dust samples; transmission by operator.
- § 71.208 Respirable dust samples; report to operator; posting.
- § 71.209 Status change reports.
- Subpart D Respirable Dust Control Plans
- § 71.300 Respirable dust control plan; filing requirements.
- § 71.301 Respirable dust control plan; approval by District Manager and posting.
- Subpart E Surface Bathing Facilities, Change Rooms, and Sanitary Flush Toilet Facilities at Surface Coal Mines
- § 71.400 Bathing facilities; change rooms; sanitary flush toilet facilities.
- § 71.401 Location of facilities.
- § 71.402 Minimum requirements for bathing facilities, change rooms, and sanitary flush toilet facilities.
- § 71.403 Waiver of surface facilities requirements; posting of waiver.
- § 71.404 Application for waiver of surface facilities requirements.
- Subpart F Sanitary Toilet Facilities at Surface Worksites of Surface Coal Mines
- § 71.500 Sanitary toilet facilities at surface work sites; installation requirements.
- § 71.501 Sanitary toilet facilities; maintenance.
- Subpart G Drinking Water
- § 71.600 Drinking water; general.
- § 71.601 Drinking water; quality.
- § 71.602 Drinking water; distribution.
- § 71.603 Drinking water; dispensing requirements.
- Subpart H Airborne Contaminants
- § 71.700 Inhalation hazards; threshold limit values for gases, dust, fumes, mists, and vapors.
- § 71.701 Sampling; general requirements.
- § 71.702 Asbestos standard.
- PART 72 HEALTH STANDARDS FOR COAL MINES
- Subpart A General
- § 72.1 Scope.
- Subpart B Medical Surveillance
- § 72.100 Periodic examinations.
- C Subpart C [Reserved]
- Subpart D Diesel Particulate Matter—Underground Areas of Underground Coal Mines
- § 72.500 Emission limits for permissible diesel-powered equipment.
- § 72.501 Emission limits for nonpermissible heavy-duty diesel-powered equipment, generators and compressors.
- § 72.502 Requirements for nonpermissible light-duty diesel-powered equipment other than generators and compressors.
- § 72.503 Determination of emissions; filter maintenance; definition of “introduced”.
- § 72.510 Miner health training.
- § 72.520 Diesel equipment inventory.
- Subpart E Miscellaneous
- § 72.610 Abrasive blasting.
- § 72.620 Drill dust control at surface mines and surface areas of underground mines.
- § 72.630 Drill dust control at underground areas of underground mines.
- § 72.700 Respiratory equipment; respirable dust.
- § 72.701 Respiratory equipment; gas, dusts, fumes, or mists.
- § 72.710 Selection, fit, use, and maintenance of approved respirators.
- § 72.800 Single, full-shift measurement of respirable coal mine dust.
- PART 74 COAL MINE DUST SAMPLING DEVICES
- Subpart A General
- § 74.1 Purpose.
- § 74.2 Definitions.
- Subpart B Approval Requirements for Coal Mine Dust Personal Sampler Unit
- § 74.3 Sampler unit.
- § 74.4 Specifications of sampler unit.
- § 74.5 Tests of coal mine dust personal sampler units.
- § 74.6 Quality control.
- Subpart C Requirements for Continuous Personal Dust Monitors
- § 74.7 Design and construction requirements.
- § 74.8 Measurement, accuracy, and reliability requirements.
- § 74.9 Quality assurance.
- § 74.10 Operating and maintenance instructions.
- § 74.11 Tests of the continuous personal dust monitor.
- Subpart D General Requirements for All Devices
- § 74.12 Conduct of tests; demonstrations.
- § 74.13 Applications.
- § 74.14 Certificate of approval.
- § 74.15 Approval labels.
- § 74.16 Material required for record.
- § 74.17 Changes after certification.
- § 74.18 Withdrawal of certification.
- PART 75 MANDATORY SAFETY STANDARDS—UNDERGROUND COAL MINES
- Subpart A General
- § 75.1 Scope.
- § 75.2 Definitions.
- Subpart B Qualified and Certified Persons
- § 75.100 Certified person.
- § 75.150 Tests for methane and for oxygen deficiency; qualified person.
- § 75.151 Tests for methane; qualified person; additional requirement.
- § 75.152 Tests of air flow; qualified person.
- § 75.153 Electrical work; qualified person.
- § 75.154 Repair of energized surface high voltage lines; qualified person.
- § 75.155 Qualified hoisting engineer; qualifications.
- § 75.156 AMS operator, qualifications.
- § 75.159 Records of certified and qualified persons.
- § 75.160 Training programs.
- 215 [Statutory Provision]
- § 75.161 Plans for training programs.
- Subpart C Roof Support
- § 75.200 Scope.
- § 75.201 Definitions.
- § 75.202 Protection from falls of roof, face and ribs.
- § 75.203 Mining methods.
- § 75.204 Roof bolting.
- § 75.205 Installation of roof support using mining machines with integral roof bolters.
- § 75.206 Conventional roof support.
- § 75.207 Pillar recovery.
- § 75.208 Warning devices.
- § 75.209 Automated Temporary Roof Support (ATRS) systems.
- § 75.210 Manual installation of temporary support.
- § 75.211 Roof testing and scaling.
- § 75.212 Rehabilitation of areas with unsupported roof.
- § 75.213 Roof support removal.
- § 75.214 Supplemental support materials, equipment and tools.
- § 75.215 Longwall mining systems.
- § 75.220 Roof control plan.
- § 75.221 Roof control plan information.
- § 75.222 Roof control plan-approval criteria.
- § 75.223 Evaluation and revision of roof control plan.
- Subpart D Ventilation
- § 75.300 Scope.
- § 75.301 Definitions.
- § 75.302 Main mine fans.
- § 75.310 Installation of main mine fans.
- § 75.311 Main mine fan operation.
- § 75.312 Main mine fan examinations and records.
- § 75.313 Main mine fan stoppage with persons underground.
- § 75.320 Air quality detectors and measurement devices.
- § 75.321 Air quality.
- § 75.322 Harmful quantities of noxious gases.
- § 75.323 Actions for excessive methane.
- § 75.324 Intentional changes in the ventilation system.
- § 75.325 Air quantity.
- § 75.326 Mean entry air velocity.
- § 75.327 Air courses and trolley haulage systems.
- § 75.330 Face ventilation control devices.
- § 75.331 Auxiliary fans and tubing.
- § 75.332 Working sections and working places.
- § 75.333 Ventilation controls.
- § 75.334 Worked-out areas and areas where pillars are being recovered.
- § 75.335 Seal strengths, design applications, and installation.
- § 75.336 Sampling and monitoring requirements.
- § 75.337 Construction and repair of seals.
- § 75.338 Training.
- § 75.339 Seals records.
- § 75.340 Underground electrical installations.
- § 75.341 Direct-fired intake air heaters.
- § 75.342 Methane monitors.
- § 75.343 Underground shops.
- § 75.344 Compressors.
- § 75.350 Belt air course ventilation.
- § 75.351 Atmospheric monitoring systems.
- § 75.352 Actions in response to AMS malfunction, alert, or alarm signals.
- § 75.360 Preshift examination at fixed intervals.
- § 75.361 Supplemental examination.
- § 75.362 On-shift examination.
- § 75.363 Hazardous conditions and violations of mandatory health or safety standards; posting, correcting, and recording.
- § 75.364 Weekly examination.
- § 75.370 Mine ventilation plan; submission and approval.
- § 75.371 Mine ventilation plan; contents.
- § 75.372 Mine ventilation map.
- § 75.373 Reopening mines.
- § 75.380 Escapeways; bituminous and lignite mines.
- § 75.381 Escapeways; anthracite mines.
- § 75.382 Mechanical escape facilities.
- § 75.384 Longwall and shortwall travelways.
- § 75.385 Opening new mines.
- § 75.386 Final mining of pillars.
- § 75.388 Boreholes in advance of mining.
- § 75.389 Mining into inaccessible areas.
- Subpart E Combustible Materials and Rock Dusting
- § 75.400 Accumulation of combustible materials.
- § 75.400-1 Definitions.
- § 75.400-2 Cleanup program.
- § 75.401 Abatement of dust; water or water with a wetting agent.
- § 75.401-1 Excessive amounts of dust.
- § 75.402 Rock dusting.
- § 75.402-1 Definition.
- § 75.402-2 Exceptions.
- § 75.403 Maintenance of incombustible content of rock dust.
- § 75.403-1 Incombustible content.
- § 75.404 Exemption of anthracite mines.
- Subpart F Electrical Equipment—General
- § 75.500 Permissible electric equipment.
- § 75.500-1 Other low horsepower electric face equipment.
- § 75.501 Permissible electric face equipment; coal seams above water table.
- § 75.501-1 Coal seams above the water table.
- § 75.501-2 Permissible electric face equipment.
- § 75.501-3 New openings; mines above water table and never classed gassy.
- § 75.502 Permits for noncompliance.
- § 75.503 Permissible electric face equipment; maintenance.
- § 75.503-1 Statement listing all electric face equipment.
- § 75.504 Permissibility of new, replacement, used, reconditioned, additional, and rebuilt electric face equipment.
- § 75.505 Mines classed gassy; use and maintenance of permissible electric face equipment.
- § 75.506 Electric face equipment; requirements for permissibility.
- § 75.506-1 Electric face equipment; permissible condition; maintenance requirements.
- § 75.507 Power connection points.
- § 75.507-1 Electric equipment other than power-connection points; outby the last open crosscut; return air; permissibility requirements.
- § 75.508 Map of electrical system.
- § 75.508-1 Mine tracks.
- § 75.508-2 Changes in electric system map; recording.
- § 75.509 Electric power circuit and electric equipment; deenergization.
- § 75.510 Energized trolley wires; repair.
- § 75.510-1 Repair of energized trolley wires; training.
- § 75.511 Low-, medium-, or high-voltage distribution circuits and equipment; repair.
- § 75.511-1 Qualified person.
- § 75.512 Electric equipment; examination, testing and maintenance.
- § 75.512-1 Qualified person.
- § 75.512-2 Frequency of examinations.
- § 75.513 Electric conductor; capacity and insulation.
- § 75.513-1 Electric conductor; size.
- § 75.514 Electrical connections or splices; suitability.
- § 75.515 Cable fittings; suitability.
- § 75.516 Power wires; support.
- § 75.516-1 Installed insulators.
- § 75.516-2 Communication wires and cables; installation; insulation; support.
- § 75.517 Power wires and cables; insulation and protection.
- § 75.517-1 Power wires and cables; insulation and protection.
- § 75.517-2 Plans for insulation of existing bare power wires and cables.
- § 75.518 Electric equipment and circuits; overload and short circuit protection.
- § 75.518-1 Electric equipment and circuits; overload and short circuit protection; minimum requirements.
- § 75.518-2 Incandescent lamps, overload and short circuit protection.
- § 75.519 Main power circuits; disconnecting switches.
- § 75.519-1 Main power circuits; disconnecting switches; locations.
- § 75.520 Electric equipment; switches.
- § 75.521 Lightning arresters; ungrounded and exposed power conductors and telephone wires.
- § 75.522 Lighting devices.
- § 75.522-1 Incandescent and fluorescent lamps.
- § 75.523 Electric face equipment; deenergization.
- § 75.523-1 Deenergization of self-propelled electric face equipment installation requirements.
- § 75.523-2 Deenergization of self-propelled electric face equipment; performance requirements.
- § 75.523-3 Automatic emergency-parking brakes.
- § 75.524 Electric face equipment; electric equipment used in return air outby the last open crosscut; maximum level of alternating or direct electric current between frames of equipment.
- Appendix A to Subpart F of Part 75 List of Permissible Electric Face Equipment Approved by the Bureau of Mines Prior to May 23, 1936
- Subpart G Trailing Cables
- § 75.600 Trailing cables; flame resistance.
- § 75.600-1 Approved cables; flame resistance.
- § 75.601 Short circuit protection of trailing cables.
- § 75.601-1 Short circuit protection; ratings and settings of circuit breakers.
- § 75.601-2 Short circuit protection; use of fuses; approval by the Secretary.
- § 75.601-3 Short circuit protection; dual element fuses; current ratings; maximum values.
- § 75.602 Trailing cable junctions.
- § 75.603 Temporary splice of trailing cable.
- § 75.604 Permanent splicing of trailing cables.
- § 75.605 Clamping of trailing cables to equipment.
- § 75.606 Protection of trailing cables.
- § 75.607 Breaking trailing cable and power cable connections.
- Subpart H Grounding
- § 75.700 Grounding metallic sheaths, armors, and conduits enclosing power conductors.
- § 75.700-1 Approved methods of grounding.
- § 75.701 Grounding metallic frames, casings, and other enclosures of electric equipment.
- § 75.701-1 Approved methods of grounding of equipment receiving power from ungrounded alternating current power systems.
- § 75.701-2 Approved method of grounding metallic frames, casings and other enclosures receiving power from single-phase 110-220-volt circuit.
- § 75.701-3 Approved methods of grounding metallic frames, casings and other enclosures of electric equipment receiving power from direct current power systems with one polarity grounded.
- § 75.701-4 Grounding wires; capacity of wires.
- § 75.701-5 Use of grounding connectors.
- § 75.702 Protection other than grounding.
- § 75.702-1 Protection other than grounding; approved by an authorized representative of the Secretary.
- § 75.703 Grounding offtrack direct-current machines and the enclosures of related detached components.
- § 75.703-1 Approved method of grounding.
- § 75.703-2 Approved grounding mediums.
- § 75.703-3 Approved methods of grounding offtrack mobile, portable and stationary direct-current machines.
- § 75.703-4 Other methods of protecting offtrack direct-current equipment; approved by an authorized representative of the Secretary.
- § 75.704 Grounding frames of stationary high-voltage equipment receiving power from ungrounded delta systems.
- § 75.704-1 Approved methods of grounding.
- § 75.705 Work on high-voltage lines; deenergizing and grounding.
- § 75.705-1 Work on high-voltage lines.
- § 75.705-2 Repairs to energized surface high-voltage lines.
- § 75.705-3 Work on energized high-voltage surface lines; reporting.
- § 75.705-4 Simultaneous repairs.
- § 75.705-5 Installation of protective equipment.
- § 75.705-6 Protective clothing; use and inspection.
- § 75.705-7 Protective equipment; inspection.
- § 75.705-8 Protective equipment; testing and storage.
- § 75.705-9 Operating disconnecting or cutout switches.
- § 75.705-10 Tying into energized high-voltage surface circuits.
- § 75.705-11 Use of grounded messenger wires; ungrounded systems.
- § 75.706 Deenergized underground power circuits; idle days—idle shifts.
- Subpart I Underground High-Voltage Distribution
- § 75.800 High-voltage circuits; circuit breakers.
- § 75.800-1 Circuit breakers; location.
- § 75.800-2 Approved circuit schemes.
- § 75.800-3 Testing, examination and maintenance of circuit breakers; procedures.
- § 75.800-4 Testing, examination, and maintenance of circuit breakers; record.
- § 75.801 Grounding resistors.
- § 75.802 Protection of high-voltage circuits extending underground.
- § 75.803 Fail safe ground check circuits on high-voltage resistance grounded systems.
- § 75.803-1 Maximum voltage ground check circuits.
- § 75.803-2 Ground check systems not employing pilot check wires; approval by the Secretary.
- § 75.804 Underground high-voltage cables.
- § 75.805 Couplers.
- § 75.806 Connection of single-phase loads.
- § 75.807 Installation of high-voltage transmission cables.
- § 75.808 Disconnecting devices.
- § 75.809 Identification of circuit breakers and disconnecting switches.
- § 75.810 High-voltage trailing cables; splices.
- § 75.811 High-voltage underground equipment; grounding.
- § 75.812 Movement of high-voltage power centers and portable transformers; permit.
- § 75.812-1 Qualified person.
- § 75.812-2 High-voltage power centers and transformers; record of examination.
- 216 High-Voltage Longwalls
- § 75.813 High-voltage longwalls; scope.
- § 75.814 Electrical protection.
- § 75.815 Disconnect devices.
- § 75.816 Guarding of cables.
- § 75.817 Cable handling and support systems.
- § 75.818 Use of insulated cable handling equipment.
- § 75.819 Motor-starter enclosures; barriers and interlocks.
- § 75.820 Electrical work; troubleshooting and testing.
- § 75.821 Testing, examination and maintenance.
- § 75.822 Underground high-voltage longwall cables.
- § 75.823 Scope.
- § 75.824 Electrical protection.
- § 75.825 Power centers.
- § 75.826 High-voltage trailing cables.
- § 75.827 Guarding of trailing cables.
- § 75.828 Trailing cable pulling.
- § 75.829 Tramming continuous mining machines in and out of the mine and from section to section.
- § 75.830 Splicing and repair of trailing cables.
- § 75.831 Electrical work; troubleshooting and testing.
- § 75.832 Frequency of examinations; recordkeeping.
- § 75.833 Handling high-voltage trailing cables.
- § 75.834 Training.
- Appendix A to Subpart I of Part 75 Diagrams of Inby and Outby Switching
- Subpart J Underground Low- and Medium-Voltage Alternating Current Circuits
- § 75.900 Low- and medium-voltage circuits serving three-phase alternating current equipment; circuit breakers.
- § 75.900-1 Circuit breakers; location.
- § 75.900-2 Approved circuit schemes.
- § 75.900-3 Testing, examination, and maintenance of circuit breakers; procedures.
- § 75.900-4 Testing, examination, and maintenance of circuit breakers; record.
- § 75.901 Protection of low- and medium-voltage three-phase circuits used underground.
- § 75.902 Low- and medium-voltage ground check monitor circuits.
- § 75.902-1 Maximum voltage ground check circuits.
- § 75.902-2 Approved ground check systems not employing pilot check wires.
- § 75.902-4 Attachment of ground conductors and ground check wires to equipment frames; use of separate connections.
- § 75.903 Disconnecting devices.
- § 75.904 Identification of circuit breakers.
- § 75.905 Connection of single-phase loads.
- § 75.906 Trailing cables for mobile equipment, ground wires, and ground check wires.
- § 75.907 Design of trailing cables for medium-voltage circuits.
- Appendix A Appendix A to Subpart J of Part 75
- Subpart K Trolley Wires and Trolley Feeder Wires
- § 75.1000 Cutout switches.
- § 75.1001 Overcurrent protection.
- § 75.1001-1 Devices for overcurrent protection; testing and calibration requirements; records.
- § 75.1002 Installation of electric equipment and conductors; permissibility.
- § 75.1003 Insulation of trolley wires, trolley feeder wires and bare signal wires; guarding of trolley wires and trolley feeder wires.
- § 75.1003-1 Other requirements for guarding of trolley wires and trolley feeder wires.
- § 75.1003-2 Requirements for movement of off-track mining equipment in areas of active workings where energized trolley wires or trolley feeder wires are present; pre-movement requirements; certified and qualified persons.
- Subpart L Fire Protection
- § 75.1100 Requirements.
- § 75.1100-1 Type and quality of firefighting equipment.
- § 75.1100-2 Quantity and location of firefighting equipment.
- § 75.1100-3 Condition and examination of firefighting equipment.
- § 75.1101 Deluge-type water sprays, foam generators; main and secondary belt-conveyor drives.
- § 75.1101-1 Deluge-type water spray systems.
- § 75.1101-2 Installation of deluge-type sprays.
- § 75.1101-3 Water requirements.
- § 75.1101-4 Branch lines.
- § 75.1101-5 Installation of foam generator systems.
- § 75.1101-6 Water sprinkler systems; general.
- § 75.1101-7 Installation of water sprinkler systems; requirements.
- § 75.1101-8 Water sprinkler systems; arrangement of sprinklers.
- § 75.1101-9 Back-up water system.
- § 75.1101-10 Water sprinkler systems; fire warning devices at belt drives.
- § 75.1101-11 Inspection of water sprinkler systems.
- § 75.1101-12 Equivalent dry-pipe system.
- § 75.1101-13 Dry powder chemical systems; general.
- § 75.1101-14 Installation of dry powder chemical systems.
- § 75.1101-15 Construction of dry powder chemical systems.
- § 75.1101-16 Dry powder chemical systems; sensing and fire-suppression devices.
- § 75.1101-17 Sealing of dry powder chemical systems.
- § 75.1101-18 Dry powder requirements.
- § 75.1101-19 Nozzles; flow rate and direction.
- § 75.1101-20 Safeguards for dry powder chemical systems.
- § 75.1101-21 Back-up water system.
- § 75.1101-22 Inspection of dry powder chemical systems.
- § 75.1102 Slippage and sequence switches.
- § 75.1103 Automatic fire warning devices.
- § 75.1103-1 Automatic fire sensors.
- § 75.1103-2 Automatic fire sensors; approved components; installation requirements.
- § 75.1103-3 Automatic fire sensor and warning device systems; minimum requirements; general.
- § 75.1103-4 Automatic fire sensor and warning device systems; installation; minimum requirements.
- § 75.1103-5 Automatic fire warning devices; actions and response.
- § 75.1103-6 Automatic fire sensors; actuation of fire suppression systems.
- § 75.1103-7 Electrical components; permissibility requirements.
- § 75.1103-8 Automatic fire sensor and warning device systems; examination and test requirements.
- § 75.1103-9 Minimum requirements; fire suppression materials and location; maintenance of entries and crosscuts; access doors; communications; fire crews; high-expansion foam devices.
- § 75.1103-10 Fire suppression systems; additional requirements.
- § 75.1103-11 Tests of fire hydrants and fire hose; record of tests.
- § 75.1104 Underground storage, lubricating oil and grease.
- § 75.1106 Welding, cutting, or soldering with arc or flame underground.
- § 75.1106-1 Test for methane.
- § 75.1106-2 Transportation of liquefied and nonliquefied compressed gas cylinders; requirements.
- § 75.1106-3 Storage of liquefied and nonliquefied compressed gas cylinders; requirements.
- § 75.1106-4 Use of liquefied and nonliquefied compressed gas cylinders; general requirements.
- § 75.1106-5 Maintenance and tests of liquefied and nonliquefied compressed gas cylinders; accessories and equipment; requirements.
- § 75.1106-6 Exemption of small low pressure gas cylinders containing nonflammable or nonexplosive gas mixtures.
- 217 Fire Suppression Devices and Fire-Resistant Hydraulic Fluids on Underground Equipment
- § 75.1107 Fire suppression devices.
- § 75.1107-1 Fire-resistant hydraulic fluids and fire suppression devices on underground equipment.
- § 75.1107-2 Approved fire-resistant hydraulic fluids; minimum requirements.
- § 75.1107-3 Fire suppression devices; approved components; installation requirements.
- § 75.1107-4 Automatic fire sensors and manual actuators; installation; minimum requirements.
- § 75.1107-5 Electrical components of fire suppression devices; permissibility requirements.
- § 75.1107-6 Capacity of fire suppression devices; location and direction of nozzles.
- § 75.1107-7 Water spray devices; capacity; water supply; minimum requirements.
- § 75.1107-8 Fire suppression devices; extinguishant supply systems.
- § 75.1107-9 Dry chemical devices; capacity; minimum requirements.
- § 75.1107-10 High expansion foam devices; minimum capacity.
- § 75.1107-11 Extinguishing agents; requirements on mining equipment employed in low coal.
- § 75.1107-12 Inerting of mine atmosphere prohibited.
- § 75.1107-13 Approval of other fire suppression devices.
- § 75.1107-14 Guards and handrails; requirements where fire suppression devices are employed.
- § 75.1107-15 Fire suppression devices; hazards; training of miners.
- § 75.1107-16 Inspection of fire suppression devices.
- § 75.1107-17 Incorporation by reference; availability of publications.
- § 75.1108 Approved conveyor belts.
- Subpart M Maps
- § 75.1200 Mine map.
- § 75.1200-1 Additional information on mine map.
- § 75.1200-2 Accuracy and scale of mine maps.
- § 75.1201 Certification.
- § 75.1202 Temporary notations, revisions, and supplements.
- § 75.1202-1 Temporary notations, revisions, and supplements.
- § 75.1203 Availability of mine map.
- § 75.1204 Mine closure; filing of map with Secretary.
- § 75.1204-1 Places to give notice and file maps.
- Subpart N Explosives and Blasting
- § 75.1300 Definitions.
- § 75.1301 Qualified person.
- § 75.1310 Explosives and blasting equipment.
- § 75.1311 Transporting explosives and detonators.
- § 75.1312 Explosives and detonators in underground magazines.
- § 75.1313 Explosives and detonators outside of magazines.
- § 75.1314 Sheathed explosive units.
- § 75.1315 Boreholes for explosives.
- § 75.1316 Preparation before blasting.
- § 75.1317 Primer cartridges.
- § 75.1318 Loading boreholes.
- § 75.1319 Weight of explosives permitted in boreholes in bituminous and lignite mines.
- § 75.1320 Multiple-shot blasting.
- § 75.1321 Permits for firing more than 20 boreholes and for use of nonpermissible blasting units.
- § 75.1322 Stemming boreholes.
- § 75.1323 Blasting circuits.
- § 75.1324 Methane concentration and tests.
- § 75.1325 Firing procedures.
- § 75.1326 Examination after blasting.
- § 75.1327 Misfires.
- § 75.1328 Damaged or deteriorated explosives and detonators.
- Subpart O Hoisting and Mantrips
- § 75.1400 Hoisting equipment; general.
- § 75.1400-1 Hoists; brakes, capability.
- § 75.1400-2 Hoists; tests of safety catches; records.
- § 75.1400-3 Daily examination of hoisting equipment.
- § 75.1400-4 Certifications and records of daily examinations.
- § 75.1401 Hoists; rated capacities; indicators.
- § 75.1401-1 Hoists; indicators.
- § 75.1402 Communication between shaft stations and hoist room.
- § 75.1402-1 Communication between shaft stations and hoist room.
- § 75.1402-2 Tests of signaling systems.
- § 75.1403 Other safeguards.
- § 75.1403-1 General criteria.
- § 75.1403-2 Criteria—Hoists transporting materials; brakes.
- § 75.1403-3 Criteria—Drum clutch; cage construction.
- § 75.1403-4 Criteria—Automatic elevators.
- § 75.1403-5 Criteria—Belt conveyors.
- § 75.1403-6 Criteria—Self-propelled personnel carriers.
- § 75.1403-7 Criteria—Mantrips.
- § 75.1403-8 Criteria—Track haulage roads.
- § 75.1403-9 Criteria—Shelter holes.
- § 75.1403-10 Criteria—Haulage; general.
- § 75.1403-11 Criteria—Entrances to shafts and slopes.
- § 75.1404 Automatic brakes; speed reduction gear.
- § 75.1404-1 Braking system.
- § 75.1405 Automatic couplers.
- § 75.1405-1 Automatic couplers, haulage equipment.
- 218 Wire Ropes
- § 75.1429 Guide ropes.
- § 75.1430 Wire ropes; scope.
- § 75.1431 Minimum rope strength.
- § 75.1432 Initial measurement.
- § 75.1433 Examinations.
- § 75.1434 Retirement criteria.
- § 75.1435 Load end attachments.
- § 75.1436 Drum end attachment.
- § 75.1437 End attachment retermination.
- § 75.1438 End attachment replacement.
- Subpart P Mine Emergencies
- § 75.1500 [Reserved]
- § 75.1501 Emergency evacuations.
- § 75.1502 Mine emergency evacuation and firefighting program of instruction.
- § 75.1503 Use of fire suppression equipment.
- § 75.1504 Mine emergency evacuation training and drills.
- § 75.1505 Escapeway maps.
- § 75.1506 Refuge alternatives.
- § 75.1507 Emergency Response Plan; refuge alternatives.
- § 75.1508 Training and records for examination, maintenance and repair of refuge alternatives and components.
- Subpart Q Communications
- § 75.1600 Communications.
- § 75.1600-1 Communication facilities; main portals; installation requirements.
- § 75.1600-2 Communication facilities; working sections; installation and maintenance requirements; audible or visual alarms.
- § 75.1600-3 Communications facilities; refuge alternatives.
- Subpart R Miscellaneous
- § 75.1700 Oil and gas wells.
- § 75.1702 Smoking; prohibition.
- § 75.1702-1 Smoking programs.
- § 75.1703 Portable electric lamps.
- § 75.1703-1 Permissible lamps.
- § 75.1707-1 New working section.
- § 75.1708 Surface structures, fireproofing.
- § 75.1708-1 Surface structures; fireproof construction.
- § 75.1709 Accumulations of methane and coal dust on surface coal-handling facilities.
- § 75.1710 Canopies or cabs; diesel-powered and electric face equipment.
- § 75.1710-1 Canopies or cabs; self-propelled diesel-powered and electric face equipment; installation requirements.
- § 75.1711 Sealing of mines.
- § 75.1711-1 Sealing of shaft openings.
- § 75.1711-2 Sealing of slope or drift openings.
- § 75.1711-3 Openings of active mines.
- § 75.1712 Bath houses and toilet facilities.
- § 75.1712-1 Availability of surface bathing facilities; change rooms; and sanitary facilities.
- § 75.1712-2 Location of surface facilities.
- § 75.1712-3 Minimum requirements of surface bathing facilities, change rooms, and sanitary toilet facilities.
- § 75.1712-4 Waiver of surface facilities requirements.
- § 75.1712-5 Application for waiver of surface facilities.
- § 75.1712-6 Underground sanitary facilities; installation and maintenance.
- § 75.1712-7 Underground sanitary facilities; waiver of requirements.
- § 75.1712-8 Application for waiver of location requirements for underground sanitary facilities.
- § 75.1712-9 Issuance of waivers.
- § 75.1712-10 Underground sanitary facilities; maintenance.
- § 75.1713 Emergency medical assistance; first-aid.
- § 75.1713-1 Arrangements for emergency medical assistance and transportation for injured persons; agreements; reporting requirements; posting requirements.
- § 75.1713-2 Emergency communications; requirements.
- § 75.1713-3 First-Aid training; supervisory employees.
- § 75.1713-4 First-aid training program; availability of instruction to all miners.
- § 75.1713-5 First-aid training program; retraining of supervisory employees; availability to all miners.
- § 75.1713-6 First-aid training program; minimum requirements.
- § 75.1713-7 First-aid equipment; location; minimum requirements.
- § 75.1714 Availability of approved self-rescue devices; instruction in use and location.
- § 75.1714-1 Approved self-rescue devices.
- § 75.1714-2 Self-rescue devices; use and location requirements.
- § 75.1714-3 Self-rescue devices; inspection, testing, maintenance, repair, and recordkeeping.
- § 75.1714-4 Additional self-contained self-rescuers (SCSRs).
- § 75.1714-5 Map locations of self-contained self-rescuers (SCSR).
- § 75.1714-6 Emergency tethers.
- § 75.1714-7 Multi-gas detectors.
- § 75.1714-8 Reporting SCSR inventory and malfunctions; retention of SCSRs.
- § 75.1715 Identification check system.
- § 75.1716 Operations under water.
- § 75.1716-1 Operations under water; notification by operator.
- § 75.1716-2 Permit required.
- § 75.1716-3 Applications for permits.
- § 75.1716-4 Issuance of permits.
- § 75.1717 Exemptions.
- § 75.1718 Drinking water.
- § 75.1718-1 Drinking water; quality.
- § 75.1719 Illumination; purpose and scope of §§ 75.1719 through 75.1719-4; time for compliance.
- § 75.1719-1 Illumination in working places.
- § 75.1719-2 Lighting fixtures; requirements.
- § 75.1719-3 Methods of measurement; light measuring instruments.
- § 75.1719-4 Mining machines, cap lamps; requirements.
- § 75.1720 Protective clothing; requirements.
- § 75.1720-1 Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced miners.
- § 75.1721 Opening of new underground coal mines, or reopening and reactivating of abandoned or deactivated coal mines, notification by the operator; requirements.
- § 75.1722 Mechanical equipment guards.
- § 75.1723 Stationary grinding machines; protective devices.
- § 75.1724 Hand-held power tools; safety devices.
- § 75.1725 Machinery and equipment; operation and maintenance.
- § 75.1726 Performing work from a raised position; safeguards.
- § 75.1727 Drive belts.
- § 75.1728 Power-driven pulleys.
- § 75.1729 Welding operations.
- § 75.1730 Compressed air; general; compressed air systems.
- § 75.1731 Maintenance of belt conveyors and belt conveyor entries.
- § 75.1732 Proximity detection systems.
- S Subpart S [Reserved]
- Subpart T Diesel-Powered Equipment
- § 75.1900 Definitions.
- § 75.1901 Diesel fuel requirements.
- § 75.1902 Underground diesel fuel storage—general requirements.
- § 75.1903 Underground diesel fuel storage facilities and areas; construction and safety precautions.
- § 75.1904 Underground diesel fuel tanks and safety cans.
- § 75.1905 Dispensing of diesel fuel.
- § 75.1905-1 Diesel fuel piping systems.
- § 75.1906 Transport of diesel fuel.
- § 75.1907 Diesel-powered equipment intended for use in underground coal mines.
- § 75.1908 Nonpermissible diesel-powered equipment; categories.
- § 75.1909 Nonpermissible diesel-powered equipment; design and performance requirements.
- § 75.1910 Nonpermissible diesel-powered equipment; electrical system design and performance requirements.
- § 75.1911 Fire suppression systems for diesel-powered equipment and fuel transportation units.
- § 75.1912 Fire suppression systems for permanent underground diesel fuel storage facilities.
- § 75.1913 Starting aids.
- § 75.1914 Maintenance of diesel-powered equipment.
- § 75.1915 Training and qualification of persons working on diesel-powered equipment.
- § 75.1916 Operation of diesel-powered equipment.
- PART 77 MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES
- Subpart A General
- § 77.1 Scope.
- § 77.2 Definitions.
- Subpart B Qualified and Certified Persons
- § 77.100 Certified person.
- § 77.101 Tests for methane and for oxygen deficiency; qualified person.
- § 77.102 Tests for methane; oxygen deficiency; qualified person, additional requirement.
- § 77.103 Electrical work; qualified person.
- § 77.104 Repair of energized surface high-voltage lines; qualified person.
- § 77.105 Qualified hoistman; slope or shaft sinking operation; qualifications.
- § 77.106 Records of certified and qualified persons.
- § 77.107 Training programs.
- § 77.107-1 Plans for training programs.
- Subpart C Surface Installations
- § 77.200 Surface installations; general.
- § 77.201 Methane content in surface installations.
- § 77.201-1 Tests for methane; qualified person; use of approved device.
- § 77.201-2 Methane accumulations; change in ventilation.
- § 77.202 Dust accumulations in surface installations.
- § 77.203 Use of material or equipment overhead; safeguards.
- § 77.204 Openings in surface installations; safeguards.
- § 77.205 Travelways at surface installations.
- § 77.206 Ladders; construction; installation and maintenance.
- § 77.207 Illumination.
- § 77.208 Storage of materials.
- § 77.209 Surge and storage piles.
- § 77.210 Hoisting of materials.
- § 77.211 Draw-off tunnels; stockpiling and reclaiming operations; general.
- § 77.211-1 Continuous methane monitoring device; installation and operation; automatic deenergization of electric equipment.
- § 77.212 Draw-off tunnel ventilation fans; installation.
- § 77.213 Draw-off tunnel escapeways.
- § 77.214 Refuse piles; general.
- § 77.215 Refuse piles; construction requirements.
- § 77.215-1 Refuse piles; identification.
- § 77.215-2 Refuse piles; reporting requirements.
- § 77.215-3 Refuse piles: certification.
- § 77.215-4 Refuse piles; abandonment.
- § 77.216 Water, sediment, or slurry impoundments and impounding structures; general.
- § 77.216-1 Water, sediment or slurry impoundments and impounding structures; identification.
- § 77.216-2 Water, sediment, or slurry impoundments and impounding structures; minimum plan requirements; changes or modifications; certification.
- § 77.216-3 Water, sediment, or slurry impoundments and impounding structures; inspection requirements; correction of hazards; program requirements.
- § 77.216-4 Water, sediment or slurry impoundments and impounding structures; reporting requirements; certification.
- § 77.216-5 Water, sediment or slurry impoundments and impounding structures; abandonment.
- § 77.217 Definitions.
- Subpart D Thermal Dryers
- § 77.300 Thermal dryers; general.
- § 77.301 Dryer heating units; operation.
- § 77.302 Bypass stacks.
- § 77.303 Hot gas inlet chamber dropout doors.
- § 77.304 Explosion release vents.
- § 77.305 Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance.
- § 77.306 Fire protection.
- § 77.307 Thermal dryers; location and installation; general.
- § 77.308 Structures housing other facilities; use of partitions.
- § 77.309 Visual check of system equipment.
- § 77.309-1 Control stations; location.
- § 77.310 Control panels.
- § 77.311 Alarm devices.
- § 77.312 Fail safe monitoring systems.
- § 77.313 Wet-coal feedbins; low-level indicators.
- § 77.314 Automatic temperature control instruments.
- § 77.315 Thermal dryers; examination and inspection.
- Subpart E Safeguards for Mechanical Equipment
- § 77.400 Mechanical equipment guards.
- § 77.401 Stationary grinding machines; protective devices.
- § 77.402 Hand-held power tools; safety devices.
- § 77.403 Mobile equipment; falling object protective structures (FOPS).
- § 77.403-1 Mobile equipment; rollover protective structures (ROPS).
- § 77.403-2 Incorporation by reference.
- § 77.404 Machinery and equipment; operation and maintenance.
- § 77.405 Performing work from a raised position; safeguards.
- § 77.406 Drive belts.
- § 77.407 Power-driven pulleys.
- § 77.408 Welding operations.
- § 77.409 Shovels, draglines, and tractors.
- § 77.410 Mobile equipment; automatic warning devices.
- § 77.411 Compressed air and boilers; general.
- § 77.412 Compressed air systems.
- § 77.413 Boilers.
- Subpart F Electrical Equipment—General
- § 77.500 Electric power circuits and electric equipment; deenergization.
- § 77.501 Electric distribution circuits and equipment; repair.
- § 77.501-1 Qualified person.
- § 77.502 Electric equipment; examination, testing, and maintenance.
- § 77.502-1 Qualified person.
- § 77.502-2 Electric equipment; frequency of examination and testing.
- § 77.503 Electric conductors; capacity and insulation.
- § 77.503-1 Electric conductors.
- § 77.504 Electrical connections or splices; suitability.
- § 77.505 Cable fittings; suitability.
- § 77.506 Electric equipment and circuits; overload and short-circuit protection.
- § 77.506-1 Electric equipment and circuits; overload and short circuit protection; minimum requirements.
- § 77.507 Electric equipment; switches.
- § 77.508 Lightning arresters, ungrounded and exposed power conductors and telephone wires.
- § 77.508-1 Lightning arresters; wires entering buildings.
- § 77.509 Transformers; installation and guarding.
- § 77.510 Resistors; location and guarding.
- § 77.511 Danger signs at electrical installations.
- § 77.512 Inspection and cover plates.
- § 77.513 Insulating mats at power switches.
- § 77.514 Switchboards; passageways and clearance.
- § 77.515 Bare signal or control wires; voltage.
- § 77.516 Electric wiring and equipment; installation and maintenance.
- Subpart G Trailing Cables
- § 77.600 Trailing cables; short-circuit protection; disconnecting devices.
- § 77.601 Trailing cables or portable cables; temporary splices.
- § 77.602 Permanent splicing of trailing cables.
- § 77.603 Clamping of trailing cables to equipment.
- § 77.604 Protection of trailing cables.
- § 77.605 Breaking trailing cable and power cable connections.
- § 77.606 Energized trailing cables; handling.
- § 77.606-1 Rubber gloves; minimum requirements.
- Subpart H Grounding
- § 77.700 Grounding metallic sheaths, armors, and conduits enclosing power conductors.
- § 77.700-1 Approved methods of grounding.
- § 77.701 Grounding metallic frames, casings, and other enclosures of electric equipment.
- § 77.701-1 Approved methods of grounding of equipment receiving power from ungrounded alternating current power systems.
- § 77.701-2 Approved methods of grounding metallic frames, casings, and other enclosures of electric equipment receiving power from a direct-current power system.
- § 77.701-3 Grounding wires; capacity.
- § 77.701-4 Use of grounding connectors.
- § 77.702 Protection other than grounding.
- § 77.703 Grounding frames of stationary high-voltage equipment receiving power from ungrounded delta systems.
- § 77.703-1 Approved methods of grounding.
- § 77.704 Work on high-voltage lines; deenergizing and grounding.
- § 77.704-1 Work on high-voltage lines.
- § 77.704-2 Repairs to energized high-voltage lines.
- § 77.704-3 Work on energized high-voltage surface lines; reporting.
- § 77.704-4 Simultaneous repairs.
- § 77.704-5 Installation of protective equipment.
- § 77.704-6 Protective clothing; use and inspection.
- § 77.704-7 Protective equipment; inspection.
- § 77.704-8 Protective equipment; testing and storage.
- § 77.704-9 Operating disconnecting or cutout switches.
- § 77.704-10 Tying into energized high-voltage surface circuits.
- § 77.704-11 Use of grounded messenger wires; ungrounded systems.
- § 77.705 Guy wires; grounding.
- Subpart I Surface High-Voltage Distribution
- § 77.800 High-voltage circuits; circuit breakers.
- § 77.800-1 Testing, examination, and maintenance of circuit breakers; procedures.
- § 77.800-2 Testing, examination, and maintenance of circuit breakers; record.
- § 77.801 Grounding resistors.
- § 77.801-1 Grounding resistors; continuous current rating.
- § 77.802 Protection of high-voltage circuits; neutral grounding resistors; disconnecting devices.
- § 77.803 Fail safe ground check circuits on high-voltage resistance grounded systems.
- § 77.803-1 Fail safe ground check circuits; maximum voltage.
- § 77.803-2 Ground check systems not employing pilot check wires; approval by the Secretary.
- § 77.804 High-voltage trailing cables; minimum design requirements.
- § 77.805 Cable couplers and connection boxes; minimum design requirements.
- § 77.806 Connection of single-phase loads.
- § 77.807 Installation of high-voltage transmission cables.
- § 77.807-1 High-voltage powerlines; clearances above ground.
- § 77.807-2 Booms and masts; minimum distance from high-voltage lines.
- § 77.807-3 Movement of equipment; minimum distance from high-voltage lines.
- § 77.808 Disconnecting devices.
- § 77.809 Identification of circuit breakers and disconnecting switches.
- § 77.810 High-voltage equipment; grounding.
- § 77.811 Movement of portable substations and transformers.
- Subpart J Low- and Medium-Voltage Alternating Current Circuits
- § 77.900 Low- and medium-voltage circuits serving portable or mobile three-phase alternating current equipment; circuit breakers.
- § 77.900-1 Testing, examination, and maintenance of circuit breakers; procedures.
- § 77.900-2 Testing, examination, and maintenance of circuit breakers; record.
- § 77.901 Protection of low- and medium-voltage three-phase circuits.
- § 77.901-1 Grounding resistor; continuous current rating.
- § 77.902 Low- and medium-voltage ground check monitor circuits.
- § 77.902-1 Fail safe ground check circuits; maximum voltage.
- § 77.902-2 Approved ground check systems not employing pilot check wires.
- § 77.902-3 Attachment of ground conductors and ground check wires to equipment frames; use of separate connections.
- § 77.903 Disconnecting devices.
- § 77.904 Identification of circuit breakers.
- § 77.905 Connection of single-phase loads.
- § 77.906 Trailing cables supplying power to low-voltage mobile equipment; ground wires and ground check wires.
- Subpart K Ground Control
- § 77.1000 Highwalls, pits and spoil banks; plans.
- § 77.1000-1 Filing of plan.
- § 77.1001 Stripping; loose material.
- § 77.1002 Box cuts; spoil material placement.
- § 77.1003 Benches.
- § 77.1004 Ground control; inspection and maintenance; general.
- § 77.1005 Scaling highwalls; general.
- § 77.1006 Highwalls; men working.
- § 77.1007 Drilling; general.
- § 77.1008 Relocation of drills; safeguards.
- § 77.1009 Drill; operation.
- § 77.1010 Collaring holes.
- § 77.1011 Drill holes; guarding.
- § 77.1012 Jackhammers; operation; safeguards.
- § 77.1013 Air drills; safeguards.
- Subpart L Fire Protection
- § 77.1100 Fire protection; training and organization.
- § 77.1101 Escape and evacuation; plan.
- § 77.1102 Warning signs; smoking and open flame.
- § 77.1103 Flammable liquids; storage.
- § 77.1104 Accumulations of combustible materials.
- § 77.1105 Internal combustion engines; fueling.
- § 77.1106 Battery-charging stations; ventilation.
- § 77.1107 Belt conveyors.
- § 77.1108 Firefighting equipment; requirements; general.
- § 77.1108-1 Type and capacity of firefighting equipment.
- § 77.1109 Quantity and location of firefighting equipment.
- § 77.1110 Examination and maintenance of firefighting equipment.
- § 77.1111 Welding, cutting, soldering; use of fire extinguisher.
- § 77.1112 Welding, cutting, or soldering with arc or flame; safeguards.
- Subpart M Maps
- § 77.1200 Mine map.
- § 77.1201 Certification of mine maps.
- § 77.1202 Availability of mine map.
- Subpart N Explosives and Blasting
- § 77.1300 Explosives and blasting.
- § 77.1301 Explosives; magazines.
- § 77.1302 Vehicles used to transport explosives.
- § 77.1303 Explosives, handling and use.
- § 77.1304 Blasting agents; special provisions.
- Subpart O Personnel Hoisting
- § 77.1400 Personnel hoists and elevators.
- § 77.1401 Automatic controls and brakes.
- § 77.1402 Rated capacity.
- § 77.1402-1 Maximum load; posting.
- § 77.1403 Daily examination of hoisting equipment.
- § 77.1404 Certifications and records of daily examinations.
- § 77.1405 Operation of hoisting equipment after repairs.
- 220 Wire Ropes
- § 77.1430 Wire ropes; scope.
- § 77.1431 Minimum rope strength.
- § 77.1432 Initial measurement.
- § 77.1433 Examinations.
- § 77.1434 Retirement criteria.
- § 77.1435 Load end attachments.
- § 77.1436 Drum end attachment.
- § 77.1437 End attachment retermination.
- § 77.1438 End attachment replacement.
- Subpart P Auger Mining
- § 77.1500 Auger mining; planning.
- § 77.1501 Auger mining; inspections.
- § 77.1502 Auger holes; restriction against entering.
- § 77.1503 Augering equipment; overhead protection.
- § 77.1504 Auger equipment; operation.
- § 77.1505 Auger holes; blocking.
- Subpart Q Loading and Haulage
- § 77.1600 Loading and haulage; general.
- § 77.1601 Transportation of persons; restrictions.
- § 77.1602 Use of aerial tramways to transport persons.
- § 77.1603 Trains and locomotives; authorized persons.
- § 77.1604 Transportation of persons; overcrowding.
- § 77.1605 Loading and haulage equipment; installations.
- § 77.1606 Loading and haulage equipment; inspection and maintenance.
- § 77.1607 Loading and haulage equipment; operation.
- § 77.1608 Dumping facilities.
- Subpart R Miscellaneous
- § 77.1700 Communications in work areas.
- § 77.1701 Emergency communications; requirements.
- § 77.1702 Arrangements for emergency medical assistance and transportation for injured persons; reporting requirements; posting requirements.
- § 77.1703 First-Aid training; supervisory employees.
- § 77.1704 First aid training program; availability of instruction to all miners.
- § 77.1705 First aid training program; retraining of supervisory employees; availability to all miners.
- § 77.1706 First aid training program; minimum requirements.
- § 77.1707 First aid equipment; location; minimum requirements.
- § 77.1708 Safety program; instruction of persons employed at the mine.
- § 77.1710 Protective clothing; requirements.
- § 77.1710-1 Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced miners.
- § 77.1711 Smoking prohibition.
- § 77.1712 Reopening mines; notification; inspection prior to mining.
- § 77.1713 Daily inspection of surface coal mine; certified person; reports of inspection.
- Subpart S Trolley Wires and Trolley Feeder Wires
- § 77.1800 Cutout switches.
- § 77.1801 Overcurrent protection.
- § 77.1801-1 Devices for overcurrent protection.
- § 77.1802 Insulation of trolley wires, trolley feeder wires and bare signal wires; guarding of trolley wires and trolley feeder wires.
- Subpart T Slope and Shaft Sinking
- § 77.1900 Slopes and shafts; approval of plans.
- § 77.1900-1 Compliance with approved slope and shaft sinking plans.
- § 77.1901 Preshift and onshift inspections; reports.
- § 77.1901-1 Methane and oxygen deficiency tests; approved devices.
- § 77.1902 Drilling and mucking operations.
- § 77.1902-1 Permissible diesel-powered equipment.
- § 77.1903 Hoists and hoisting; minimum requirements.
- § 77.1904 Communications between slope and shaft bottoms and hoist operators.
- § 77.1905 Hoist safeguards; general.
- § 77.1906 Hoists; daily inspection.
- § 77.1907 Hoist construction; general.
- § 77.1908 Hoist installations; use.
- § 77.1908-1 Hoist operation; qualified hoistman.
- § 77.1909 Explosives and blasting; use of permissible explosives and shot-firing units.
- § 77.1909-1 Use of nonpermissible explosives and nonpermissible shot-firing units; approval by Health and Safety District Manager.
- § 77.1910 Explosives and blasting; general.
- § 77.1911 Ventilation of slopes and shafts.
- § 77.1912 Ladders and stairways.
- § 77.1913 Fire-resistant wood.
- § 77.1914 Electrical equipment.
- § 77.1915 Storage and handling of combustible materials.
- § 77.1916 Welding, cutting, and soldering; fire protection.
- Subpart U Approved Books and Records [Reserved]
- Subpart V Safety Program for Surface Mobile Equipment
- § 77.2100 Purpose and scope.
- § 77.2101 Definitions.
- § 77.2102 Written safety program.
- § 77.2103 Requirements for written safety program.
- § 77.2104 Record and inspection.
- PART 90 MANDATORY HEALTH STANDARDS—COAL MINERS WHO HAVE EVIDENCE OF THE DEVELOPMENT OF PNEUMOCONIOSIS
- Subpart A General
- § 90.1 Scope.
- § 90.2 Definitions.
- § 90.3 Part 90 option; notice of eligibility; exercise of option.
- Subpart B Dust Standards, Rights of Part 90 Miners
- § 90.100 Respirable dust standard.
- § 90.101 [Reserved]
- § 90.102 Transfer; notice.
- § 90.103 Compensation.
- § 90.104 Waiver of rights; re-exercise of option.
- Subpart C Sampling Procedures
- § 90.201 Sampling; general and technical requirements.
- § 90.202 Certified person; sampling.
- § 90.203 Certified person; maintenance and calibration.
- § 90.204 Approved sampling devices; maintenance and calibration.
- § 90.205 Approved sampling devices; operation; air flowrate.
- § 90.206 Exercise of option or transfer sampling.
- § 90.207 Quarterly sampling.
- § 90.208 Respirable dust samples; transmission by operator.
- § 90.209 Respirable dust samples; report to operator.
- § 90.210 Status change reports.
- Subpart D Respirable Dust Control Plans
- § 90.300 Respirable dust control plan; filing requirements.
- § 90.301 Respirable dust control plan; approval by District Manager; copy to part 90 miner.
- SUBCHAPTER P CIVIL PENALTIES FOR VIOLATIONS OF THE FEDERAL MINE SAFETY AND HEALTH ACT OF 1977
- PART 100 CRITERIA AND PROCEDURES FOR PROPOSED ASSESSMENT OF CIVIL PENALTIES
- § 100.1 Scope and purpose.
- § 100.2 Applicability.
- § 100.3 Determination of penalty amount; regular assessment.
- § 100.4 Unwarrantable failure and immediate notification.
- § 100.5 Determination of penalty amount; special assessment.
- § 100.6 Procedures for review of citations and orders; procedures for assessment of civil penalties and conferences.
- § 100.7 Notice of proposed penalty; notice of contest.
- § 100.8 Service.
- 101-103 PARTS 101-103 [RESERVED]
- SUBCHAPTER Q PATTERN OF VIOLATIONS
- PART 104 PATTERN OF VIOLATIONS
- § 104.1 Purpose and scope.
- § 104.2 Pattern criteria.
- § 104.3 Issuance of notice.
- § 104.4 Termination of notice.
- 105-199 PARTS 105-199 [RESERVED]
- CHAPTER II BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF THE INTERIOR
- SUBCHAPTER A MINERALS REVENUE MANAGEMENT
- 200-202 PARTS 200-202 [RESERVED]
- PART 203 RELIEF OR REDUCTION IN ROYALTY RATES
- Subpart A General Provisions
- § 203.0 What definitions apply to this part?
- § 203.1 What is BSEE's authority to grant royalty relief?
- § 203.2 How can I obtain royalty relief?
- § 203.3 Do I have to pay a fee to request royalty relief?
- § 203.4 How do the provisions in this part apply to different types of leases and projects?
- § 203.5 What is BSEE's authority to collect information?
- Subpart B OCS Oil, Gas, and Sulfur General
- 6 Royalty Relief for Drilling Ultra-Deep Wells on Leases Not Subject to Deep Water Royalty Relief
- § 203.30 Which leases are eligible for royalty relief as a result of drilling a phase 2 or phase 3 ultra-deep well?
- § 203.31 If I have a qualified phase 2 or qualified phase 3 ultra-deep well, what royalty relief would that well earn for my lease?
- § 203.32 What other requirements or restrictions apply to royalty relief for a qualified phase 2 or phase 3 ultra-deep well?
- § 203.33 To which production do I apply the RSV earned by qualified phase 2 and phase 3 ultra-deep wells on my lease or in my unit?
- § 203.34 To which production may an RSV earned by qualified phase 2 and phase 3 ultra-deep wells on my lease not be applied?
- § 203.35 What administrative steps must I take to use the RSV earned by a qualified phase 2 or phase 3 ultra-deep well?
- § 203.36 Do I keep royalty relief if prices rise significantly?
- 7 Royalty Relief for Drilling Deep Gas Wells on Leases Not Subject to Deep Water Royalty Relief
- § 203.40 Which leases are eligible for royalty relief as a result of drilling a deep well or a phase 1 ultra-deep well?
- § 203.41 If I have a qualified deep well or a qualified phase 1 ultra-deep well, what royalty relief would my lease earn?
- § 203.42 What conditions and limitations apply to royalty relief for deep wells and phase 1 ultra-deep wells?
- § 203.43 To which production do I apply the RSV earned from qualified deep wells or qualified phase 1 ultra-deep wells on my lease?
- § 203.44 What administrative steps must I take to use the royalty suspension volume?
- § 203.45 If I drill a certified unsuccessful well, what royalty relief will my lease earn?
- § 203.46 To which production do I apply the royalty suspension supplements from drilling one or two certified unsuccessful wells on my lease?
- § 203.47 What administrative steps do I take to obtain and use the royalty suspension supplement?
- § 203.48 Do I keep royalty relief if prices rise significantly?
- § 203.49 May I substitute the deep gas drilling provisions in this part for the deep gas royalty relief provided in my lease terms?
- 8 Royalty Relief for End-of-Life Leases
- § 203.50 Who may apply for end-of-life royalty relief?
- § 203.51 How do I apply for end-of-life royalty relief?
- § 203.52 What criteria must I meet to get relief?
- § 203.53 What relief will BSEE grant?
- § 203.54 How does my relief arrangement for an oil and gas lease operate if prices rise sharply?
- § 203.55 Under what conditions can my end-of-life royalty relief arrangement for an oil and gas lease be ended?
- § 203.56 Does relief transfer when a lease is assigned?
- 9 Royalty Relief for Pre-Act Deep Water Leases and for Development and Expansion Projects
- § 203.60 Who may apply for royalty relief on a case-by-case basis in deep water in the Gulf of America or offshore of Alaska?
- § 203.61 How do I assess my chances for getting relief?
- § 203.62 How do I apply for relief?
- § 203.63 Does my application have to include all leases in the field?
- § 203.64 How many applications may I file on a field or a development project?
- § 203.65 How long will BSEE take to evaluate my application?
- § 203.66 What happens if BSEE does not act in the time allowed?
- § 203.67 What economic criteria must I meet to get royalty relief on an authorized field or project?
- § 203.68 What pre-application costs will BSEE consider in determining economic viability?
- § 203.69 If my application is approved, what royalty relief will I receive?
- § 203.70 What information must I provide after BSEE approves relief?
- § 203.71 How does BSEE allocate a field's suspension volume between my lease and other leases on my field?
- § 203.72 Can my lease receive more than one suspension volume?
- § 203.73 How do suspension volumes apply to natural gas?
- § 203.74 When will BSEE reconsider its determination?
- § 203.75 What risk do I run if I request a redetermination?
- § 203.76 When might BSEE withdraw or reduce the approved size of my relief?
- § 203.77 May I voluntarily give up relief if conditions change?
- § 203.78 Do I keep relief approved by BSEE under this part for my lease, unit or project if prices rise significantly?
- § 203.79 How do I appeal BSEE's decisions related to royalty relief for a deepwater lease or a development or expansion project?
- § 203.80 When can I get royalty relief if I am not eligible for royalty relief under other sections in the subpart?
- 10 Required Reports
- § 203.81 What supplemental reports do royalty-relief applications require?
- § 203.82 What is BSEE's authority to collect this information?
- § 203.83 What is in an administrative information report?
- § 203.84 What is in a net revenue and relief justification report?
- § 203.85 What is in an economic viability and relief justification report?
- § 203.86 What is in a G&G report?
- § 203.87 What is in an engineering report?
- § 203.88 What is in a production report?
- § 203.89 What is in a cost report?
- § 203.90 What is in a fabricator's confirmation report?
- § 203.91 What is in a post-production development report?
- Subpart C Federal and Indian Oil [Reserved]
- Subpart D Federal and Indian Gas [Reserved]
- Subpart E Solid Minerals, General [Reserved]
- F Subpart F [Reserved]
- Subpart G Other Solid Minerals [Reserved]
- Subpart H Geothermal Resources [Reserved]
- Subpart I OCS Sulfur [Reserved]
- SUBCHAPTER B OFFSHORE
- PART 250 OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF
- Subpart A General
- 69 Authority and Definition of Terms
- § 250.101 Authority and applicability.
- § 250.102 What does this part do?
- § 250.103 Where can I find more information about the requirements in this part?
- § 250.104 How may I appeal a decision made under BSEE regulations?
- § 250.105 Definitions.
- 70 Performance Standards
- § 250.106 What standards will the Director use to regulate lease operations?
- § 250.107 What must I do to protect health, safety, property, and the environment?
- § 250.108 What requirements must I follow for cranes and other material-handling equipment?
- § 250.109 What documents must I prepare and maintain related to welding?
- § 250.110 What must I include in my welding plan?
- § 250.111 Who oversees operations under my welding plan?
- § 250.112 What standards must my welding equipment meet?
- § 250.113 What procedures must I follow when welding?
- § 250.114 How must I install, maintain, and operate electrical equipment?
- § 250.115 What are the procedures for, and effects of, incorporation of documents by reference in this part?
- §§ 250.116-250.117 [Reserved]
- 71 Gas Storage or Injection
- § 250.118 Will BSEE approve gas injection?
- § 250.119 [Reserved]
- § 250.120 How does injecting, storing, or treating gas affect my royalty payments?
- § 250.121 What happens when the reservoir contains both original gas in place and injected gas?
- § 250.122 What effect does subsurface storage have on the lease term?
- § 250.123 [Reserved]
- § 250.124 Will BSEE approve gas injection into the cap rock containing a sulphur deposit?
- 72 Fees
- § 250.125 Service fees.
- § 250.126 Electronic payment instructions.
- 73 Inspections of Operations
- § 250.130 Why does BSEE conduct inspections?
- § 250.131 Will BSEE notify me before conducting an inspection?
- § 250.132 What must I do when BSEE conducts an inspection?
- § 250.133 Will BSEE reimburse me for my expenses related to inspections?
- 74 Disqualification
- § 250.135 What will BSEE do if my operating performance is unacceptable?
- § 250.136 How will BSEE determine if my operating performance is unacceptable?
- 75 Special Types of Approvals
- § 250.140 When will I receive an oral approval?
- § 250.141 May I ever use alternate procedures or equipment?
- § 250.142 How do I receive approval for departures?
- §§ 250.143-250.144 [Reserved]
- § 250.145 How do I designate an agent or a local agent?
- § 250.146 Who is responsible for fulfilling leasehold obligations?
- 76 Naming and Identifying Facilities and Wells (Does Not Include MODUs)
- § 250.150 How do I name facilities and wells in the Gulf of America Region?
- § 250.151 How do I name facilities in the Pacific Region?
- § 250.152 How do I name facilities in the Alaska Region?
- § 250.153 Do I have to rename an existing facility or well?
- § 250.154 What identification signs must I display?
- §§ 250.160-250.167 [Reserved]
- 77 Suspensions
- § 250.168 May operations or production be suspended?
- § 250.169 What effect does suspension have on my lease?
- § 250.170 How long does a suspension last?
- § 250.171 How do I request a suspension?
- § 250.172 When may the Regional Supervisor grant or direct an SOO or SOP?
- § 250.173 When may the Regional Supervisor direct an SOO or SOP?
- § 250.174 When may the Regional Supervisor grant or direct an SOP?
- § 250.175 When may the Regional Supervisor grant an SOO?
- § 250.176 Does a suspension affect my royalty payment?
- § 250.177 What additional requirements may the Regional Supervisor order for a suspension?
- 78 Primary Lease Requirements, Lease Term Extensions, and Lease Cancellations
- § 250.180 What am I required to do to keep my lease term in effect?
- §§ 250.181-250.185 [Reserved]
- 79 Information and Reporting Requirements
- § 250.186 What reporting information and report forms must I submit?
- § 250.187 What are BSEE's incident reporting requirements?
- § 250.188 What incidents must I report to BSEE and when must I report them?
- § 250.189 Reporting requirements for incidents requiring immediate notification.
- § 250.190 Reporting requirements for incidents requiring written notification.
- § 250.191 How does BSEE conduct incident investigations?
- § 250.192 What reports and statistics must I submit relating to a hurricane, earthquake, or other natural occurrence?
- § 250.193 Reports and investigations of possible violations.
- § 250.194 How must I protect archaeological resources?
- § 250.195 What notification does BSEE require on the production status of wells?
- § 250.196 Reimbursements for reproduction and processing costs.
- § 250.197 Data and information to be made available to the public or for limited inspection.
- 80 References
- § 250.198 Documents incorporated by reference.
- § 250.199 Paperwork Reduction Act statements—information collection.
- Subpart B Plans and Information
- 81 General Information
- § 250.200 Definitions.
- § 250.201 What plans and information must I submit before I conduct any activities on my lease or unit?
- § 250.202 How must I protect the rights of the Federal government?
- § 250.203 Are there special requirements if my well affects an adjacent property?
- § 250.204 Requirements for high pressure high temperature (HPHT) barrier equipment.
- § 250.205 [Reserved]
- 82 Barrier Equipment and Systems
- § 250.206 What equipment does BSEE consider to be a barrier?
- § 250.207 How must barrier systems be used?
- 83 Activities and Post-Approval Requirements for the EP, DPP, DWOP, and DOCD
- § 250.208 How must I conduct activities under an approved EP, DPP, or DOCD?
- § 250.209 What must I do to conduct activities under the approved EP, DPP, or DOCD?
- § 250.210 Do I have to conduct post-approval monitoring?
- § 250.211 What are my new or unusual technology failure reporting requirements?
- §§ 250.212-250.219 [Reserved]
- 84 Deepwater Operations Plan (DWOP) Process
- § 250.220 What is the DWOP process?
- § 250.221 When must I use the DWOP process?
- §§ 250.222-250.224 [Reserved]
- 85 Conceptual Plans
- § 250.225 What are the types of Conceptual Plans that I must submit?
- § 250.226 When and how must I submit each applicable Conceptual Plan?
- § 250.227 What must the Project Conceptual Plan contain?
- § 250.228 What must the New or Unusual Technology Conceptual Plan contain?
- § 250.229 What must the New or Unusual Technology Barrier Equipment Conceptual Plan include?
- § 250.230 When are you required to submit an I3P Report?
- § 250.231 What are your requirements for the Independent Third Party (I3P) nomination?
- § 250.232 What are the I3P review requirements for Conceptual Plan reviews?
- § 250.233 General requirements for any I3P Report.
- § 250.234 [Reserved]
- 86 DWOP Approval
- § 250.235 When and how must I submit the DWOP?
- § 250.236 What information must I submit with the DWOP?
- § 250.237 What general information must my DWOP include?
- § 250.238 What well or completions information must my DWOP include?
- § 250.239 What structural information must my DWOP include?
- § 250.240 What production safety system information must my DWOP include?
- § 250.241 What subsea systems and pipeline information must my DWOP include?
- § 250.242 What New or Unusual Technology information must my DWOP include?
- §§ 250.243-250.244 [Reserved]
- § 250.245 May I combine the Project Conceptual Plan and the DWOP?
- § 250.246 When must I revise my DWOP?
- § 250.247 When must I supplement my DWOP?
- § 250.248 What information must I include in my Supplemental DWOP?
- Subpart C Pollution Prevention and Control
- § 250.300 Pollution prevention.
- § 250.301 Inspection of facilities.
- Subpart D Oil and Gas Drilling Operations
- 87 General Requirements
- § 250.400 General requirements.
- §§ 250.401-250.403 [Reserved]
- § 250.404 What are the requirements for the crown block?
- § 250.405 What are the safety requirements for diesel engines used on a drilling rig?
- § 250.406 [Reserved]
- § 250.407 What tests must I conduct to determine reservoir characteristics?
- § 250.408 May I use alternative procedures or equipment during drilling operations?
- § 250.409 May I obtain departures from these drilling requirements?
- 88 Applying for a Permit To Drill
- § 250.410 How do I obtain approval to drill a well?
- § 250.411 What information must I submit with my application?
- § 250.412 What requirements must the location plat meet?
- § 250.413 What must my description of well drilling design criteria address?
- § 250.414 What must my drilling prognosis include?
- § 250.415 What must my casing and cementing programs include?
- § 250.416 What must I include in the diverter description?
- § 250.417 [Reserved]
- § 250.418 What additional information must I submit with my APD?
- 89 Casing and Cementing Requirements
- § 250.420 What well casing and cementing requirements must I meet?
- § 250.421 What are the casing and cementing requirements by type of casing string?
- § 250.422 When may I resume drilling after cementing?
- § 250.423 What are the requirements for casing and liner installation?
- §§ 250.424-250.426 [Reserved]
- § 250.427 What are the requirements for pressure integrity tests?
- § 250.428 What must I do in certain cementing and casing situations?
- 90 Diverter System Requirements
- § 250.430 When must I install a diverter system?
- § 250.431 What are the diverter design and installation requirements?
- § 250.432 How do I obtain a departure to diverter design and installation requirements?
- § 250.433 What are the diverter actuation and testing requirements?
- § 250.434 What are the recordkeeping requirements for diverter actuations and tests?
- §§ 250.440-250.451 [Reserved]
- § 250.452 What are the real-time monitoring requirements for Arctic OCS exploratory drilling operations?
- 91 Drilling Fluid Requirements
- § 250.455 What are the general requirements for a drilling fluid program?
- § 250.456 What safe practices must the drilling fluid program follow?
- § 250.457 What equipment is required to monitor drilling fluids?
- § 250.458 What quantities of drilling fluids are required?
- § 250.459 What are the safety requirements for drilling fluid-handling areas?
- 92 Other Drilling Requirements
- § 250.460 What are the requirements for conducting a well test?
- § 250.461 What are the requirements for directional and inclination surveys?
- § 250.462 What are the source control, containment, and collocated equipment requirements?
- § 250.463 Who establishes field drilling rules?
- 93 Applying for a Permit To Modify and Well Records
- § 250.465 When must I submit an Application for Permit to Modify (APM) or an End of Operations Report to BSEE?
- §§ 250.466-250.469 [Reserved]
- 94 Additional Arctic OCS Requirements
- § 250.470 What additional information must I submit with my APD for Arctic OCS exploratory drilling operations?
- § 250.471 What are the requirements for Arctic OCS source control and containment?
- § 250.472 What are the relief rig requirements for the Arctic OCS?
- § 250.473 What must I do to protect health, safety, property, and the environment while operating on the Arctic OCS?
- 95 Hydrogen Sulfide
- § 250.490 Hydrogen sulfide.
- Subpart E Oil and Gas Well-Completion Operations
- § 250.500 General requirements.
- § 250.501 Definition.
- § 250.502 [Reserved]
- § 250.503 Emergency shutdown system.
- § 250.504 Hydrogen sulfide.
- § 250.505 Subsea completions.
- §§ 250.506-250.508 [Reserved]
- § 250.509 Well-completion structures on fixed platforms.
- § 250.510 Diesel engine air intakes.
- § 250.511 Traveling-block safety device.
- § 250.512 Field well-completion rules.
- § 250.513 Approval and reporting of well-completion operations.
- § 250.514 Well-control fluids, equipment, and operations.
- §§ 250.515-250.517 [Reserved]
- § 250.518 Tubing and wellhead equipment.
- 96 Casing Pressure Management
- § 250.519 What are the requirements for casing pressure management?
- § 250.520 How often do I have to monitor for casing pressure?
- § 250.521 When do I have to perform a casing diagnostic test?
- § 250.522 How do I manage the thermal effects caused by initial production on a newly completed or recompleted well?
- § 250.523 When do I have to repeat casing diagnostic testing?
- § 250.524 How long do I keep records of casing pressure and diagnostic tests?
- § 250.525 When am I required to take action from my casing diagnostic test?
- § 250.526 What do I submit if my casing diagnostic test requires action?
- § 250.527 What must I include in my notification of corrective action?
- § 250.528 What must I include in my casing pressure request?
- § 250.529 What are the terms of my casing pressure request?
- § 250.530 What if my casing pressure request is denied?
- § 250.531 When does my casing pressure request approval become invalid?
- Subpart F Oil and Gas Well-Workover Operations
- § 250.600 General requirements.
- § 250.601 Definitions.
- § 250.602 [Reserved]
- § 250.603 Emergency shutdown system.
- § 250.604 Hydrogen sulfide.
- § 250.605 Subsea workovers.
- §§ 250.606-250.608 [Reserved]
- § 250.609 Well-workover structures on fixed platforms.
- § 250.610 Diesel engine air intakes.
- § 250.611 Traveling-block safety device.
- § 250.612 Field well-workover rules.
- § 250.613 Approval and reporting for well-workover operations.
- § 250.614 Well-control fluids, equipment, and operations.
- §§ 250.615-250.618 [Reserved]
- § 250.619 Tubing and wellhead equipment.
- § 250.620 Wireline operations.
- Subpart G Well Operations and Equipment
- 97 General Requirements
- § 250.700 What operations and equipment does this subpart cover?
- § 250.701 May I use alternate procedures or equipment during operations?
- § 250.702 May I obtain departures from these requirements?
- § 250.703 What must I do to keep wells under control?
- 98 Rig Requirements
- § 250.710 What instructions must be given to personnel engaged in well operations?
- § 250.711 What are the requirements for well-control drills?
- § 250.712 What rig unit movements must I report?
- § 250.713 What must I provide if I plan to use a mobile offshore drilling unit (MODU) for well operations?
- § 250.714 Do I have to develop a dropped objects plan?
- § 250.715 Do I need a global positioning system (GPS) for all MODUs?
- 99 Well Operations
- § 250.720 When and how must I secure a well?
- § 250.721 What are the requirements for pressure testing casing and liners?
- § 250.722 What are the requirements for prolonged operations in a well?
- § 250.723 What additional safety measures must I take when I conduct operations on a platform that has producing wells or has other hydrocarbon flow?
- § 250.724 What are the real-time monitoring requirements?
- 100 Blowout Preventer (BOP) System Requirements
- § 250.730 What are the general requirements for BOP systems and system components?
- § 250.731 What information must I submit for BOP systems and system components?
- § 250.732 What are the independent third party requirements for BOP systems and system components?
- § 250.733 What are the requirements for a surface BOP stack?
- § 250.734 What are the requirements for a subsea BOP system?
- § 250.735 What associated systems and related equipment must all BOP systems include?
- § 250.736 What are the requirements for choke manifolds, kelly-type valves inside BOPs, and drill string safety valves?
- § 250.737 What are the BOP system testing requirements?
- § 250.738 What must I do in certain situations involving BOP equipment or systems?
- § 250.739 What are the BOP maintenance and inspection requirements?
- 101 Records and Reporting
- § 250.740 What records must I keep?
- § 250.741 How long must I keep records?
- § 250.742 What well records am I required to submit?
- § 250.743 What are the well activity reporting requirements?
- § 250.744 What are the end of operation reporting requirements?
- § 250.745 What other well records could I be required to submit?
- § 250.746 What are the recordkeeping requirements for casing, liner, and BOP tests, and inspections of BOP systems and marine risers?
- 102 Coiled Tubing Operations
- § 250.750 What are the coiled tubing requirements?
- § 250.751 Coiled tubing testing requirements.
- 103 Snubbing Operations
- § 250.760 What are the snubbing requirements?
- Subpart H Oil and Gas Production Safety Systems
- 104 General Requirements
- § 250.800 General.
- § 250.801 Safety and pollution prevention equipment (SPPE) certification.
- § 250.802 Requirements for SPPE.
- § 250.803 What SPPE failure reporting procedures must I follow?
- § 250.804 [Reserved]
- § 250.805 Hydrogen sulfide.
- §§ 250.806-250.809 [Reserved]
- Surface and Subsurface Safety Systems Dry Trees
- § 250.810 Dry tree subsurface safety devices—general.
- § 250.811 Specifications for SSSVs—dry trees.
- § 250.812 Surface-controlled SSSVs—dry trees.
- § 250.813 Subsurface-controlled SSSVs.
- § 250.814 Design, installation, and operation of SSSVs—dry trees.
- § 250.815 Subsurface safety devices in shut-in wells—dry trees.
- § 250.816 Subsurface safety devices in injection wells—dry trees.
- § 250.817 Temporary removal of subsurface safety devices for routine operations.
- § 250.818 Additional safety equipment—dry trees.
- § 250.819 Specification for surface safety valves (SSVs).
- § 250.820 Use of SSVs.
- § 250.821 Emergency action and safety system shutdown—dry trees.
- §§ 250.822-250.824 [Reserved]
- Subsea and Subsurface Safety Systems Subsea Trees
- § 250.825 Subsea tree subsurface safety devices—general.
- § 250.826 Specifications for SSSVs—subsea trees.
- § 250.827 Surface-controlled SSSVs—subsea trees.
- § 250.828 Design, installation, and operation of SSSVs—subsea trees.
- § 250.829 Subsurface safety devices in shut-in wells—subsea trees.
- § 250.830 Subsurface safety devices in injection wells—subsea trees.
- § 250.831 Alteration or disconnection of subsea pipeline or umbilical.
- § 250.832 Additional safety equipment—subsea trees.
- § 250.833 Specification for underwater safety valves (USVs).
- § 250.834 Use of USVs.
- § 250.835 Specification for all boarding shutdown valves (BSDVs) associated with subsea systems.
- § 250.836 Use of BSDVs.
- § 250.837 Emergency action and safety system shutdown—subsea trees.
- § 250.838 What are the maximum allowable valve closure times and hydraulic bleeding requirements for an electro-hydraulic control system?
- § 250.839 What are the maximum allowable valve closure times and hydraulic bleeding requirements for a direct-hydraulic control system?
- 107 PRODUCTION SAFETY SYSTEMS
- § 250.840 Design, installation, and maintenance—general.
- § 250.841 Platforms.
- § 250.842 Approval of safety systems design and installation features.
- §§ 250.843-250.849 [Reserved]
- 108 Additional Production System Requirements
- § 250.850 Production system requirements—general.
- § 250.851 Pressure vessels (including heat exchangers) and fired vessels.
- § 250.852 Flowlines/Headers.
- § 250.853 Safety sensors.
- § 250.854 Floating production units equipped with turrets and turret-mounted systems.
- § 250.855 Emergency shutdown (ESD) system.
- § 250.856 Engines.
- § 250.857 Glycol dehydration units.
- § 250.858 Gas compressors.
- § 250.859 Firefighting systems.
- § 250.860 Chemical firefighting system.
- § 250.861 Foam firefighting systems.
- § 250.862 Fire and gas-detection systems.
- § 250.863 Electrical equipment.
- § 250.864 Erosion.
- § 250.865 Surface pumps.
- § 250.866 Personnel safety equipment.
- § 250.867 Temporary quarters and temporary equipment.
- § 250.868 Non-metallic piping.
- § 250.869 General platform operations.
- § 250.870 Time delays on pressure safety low (PSL) sensors.
- § 250.871 Welding and burning practices and procedures.
- § 250.872 Atmospheric vessels.
- § 250.873 Subsea gas lift requirements.
- § 250.874 Subsea water injection systems.
- § 250.875 Subsea pump systems.
- § 250.876 Fired and exhaust heated components.
- §§ 250.877-250.879 [Reserved]
- 109 Safety Device Testing
- § 250.880 Production safety system testing.
- §§ 250.881-250.889 [Reserved]
- 110 Records and Training
- § 250.890 Records.
- § 250.891 Safety device training.
- §§ 250.892-250.899 [Reserved]
- Subpart I Platforms and Structures
- 111 General Requirements for Platforms
- § 250.900 What general requirements apply to all platforms?
- § 250.901 What industry standards must your platform meet?
- § 250.902 What are the requirements for platform removal and location clearance?
- § 250.903 What records must I keep?
- 112 Platform Approval Program
- § 250.904 What is the Platform Approval Program?
- § 250.905 How do I get approval for the installation, modification, or repair of my platform?
- § 250.906 What must I do to obtain approval for the proposed site of my platform?
- § 250.907 Where must I locate foundation boreholes?
- § 250.908 What are the minimum structural fatigue design requirements?
- 113 Platform Verification Program
- § 250.909 What is the Platform Verification Program?
- § 250.910 Which of my facilities are subject to the Platform Verification Program?
- § 250.911 If my platform is subject to the Platform Verification Program, what must I do?
- § 250.912 What plans must I submit under the Platform Verification Program?
- § 250.913 When must I resubmit Platform Verification Program plans?
- § 250.914 How do I nominate a CVA?
- § 250.915 What are the CVA's primary responsibilities?
- § 250.916 What are the CVA's primary duties during the design phase?
- § 250.917 What are the CVA's primary duties during the fabrication phase?
- § 250.918 What are the CVA's primary duties during the installation phase?
- 114 Inspection, Maintenance, and Assessment of Platforms
- § 250.919 What in-service inspection requirements must I meet?
- § 250.920 What are the BSEE requirements for assessment of fixed platforms?
- § 250.921 How do I analyze my platform for cumulative fatigue?
- Subpart J Pipelines and Pipeline Rights-of-Way
- § 250.1000 General requirements.
- § 250.1001 Definitions.
- § 250.1002 Design requirements for DOI pipelines.
- § 250.1003 Installation, testing, and repair requirements for DOI pipelines.
- § 250.1004 Safety equipment requirements for DOI pipelines.
- § 250.1005 Inspection requirements for DOI pipelines.
- § 250.1006 How must I decommission and take out of service a DOI pipeline?
- § 250.1007 What to include in applications.
- § 250.1008 Reports.
- § 250.1009 Requirements to obtain pipeline right-of-way grants.
- § 250.1010 General requirements for pipeline right-of-way holders.
- § 250.1011 [Reserved]
- § 250.1012 Required payments for pipeline right-of-way holders.
- § 250.1013 Grounds for forfeiture of pipeline right-of-way grants.
- § 250.1014 When pipeline right-of-way grants expire.
- § 250.1015 Applications for pipeline right-of-way grants.
- § 250.1016 Granting pipeline rights-of-way.
- § 250.1017 Requirements for construction under pipeline right-of-way grants.
- § 250.1018 Assignment of pipeline right-of-way grants.
- § 250.1019 Relinquishment of pipeline right-of-way grants.
- Subpart K Oil and Gas Production Requirements
- 115 General
- § 250.1150 What are the general reservoir production requirements?
- 116 Well Tests and Surveys
- § 250.1151 How often must I conduct well production tests?
- § 250.1152 How do I conduct well tests?
- §§ 250.1153-250.1155 [Reserved]
- 117 Approvals Prior to Production
- § 250.1156 What steps must I take to receive approval to produce within 500 feet of a unit or lease line?
- § 250.1157 How do I receive approval to produce gas-cap gas from an oil reservoir with an associated gas cap?
- § 250.1158 How do I receive approval to downhole commingle hydrocarbons?
- 118 Production Rates
- § 250.1159 May the Regional Supervisor limit my well or reservoir production rates?
- 119 Flaring, Venting, and Burning Hydrocarbons
- § 250.1160 When may I flare or vent gas?
- § 250.1161 When may I flare or vent gas for extended periods of time?
- § 250.1162 When may I burn produced liquid hydrocarbons?
- § 250.1163 How must I measure gas flaring or venting volumes and liquid hydrocarbon burning volumes, and what records must I maintain?
- § 250.1164 What are the requirements for flaring or venting gas containing H2S?
- 120 Other Requirements
- § 250.1165 What must I do for enhanced recovery operations?
- § 250.1166 What additional reporting is required for developments in the Alaska OCS Region?
- § 250.1167 What information must I submit with forms and for approvals?
- Subpart L Oil and Gas Production Measurement, Surface Commingling, and Security
- § 250.1200 Question index table.
- § 250.1201 Definitions.
- § 250.1202 Liquid hydrocarbon measurement.
- § 250.1203 Gas measurement.
- § 250.1204 Surface commingling.
- § 250.1205 Site security.
- Subpart M Unitization
- § 250.1300 What is the purpose of this subpart?
- § 250.1301 What are the requirements for unitization?
- § 250.1302 What if I have a competitive reservoir on a lease?
- § 250.1303 How do I apply for voluntary unitization?
- § 250.1304 How will BSEE require unitization?
- Subpart N Outer Continental Shelf Civil Penalties
- 121 Outer Continental Shelf Lands Act Civil Penalties
- § 250.1400 How does BSEE begin the civil penalty process?
- § 250.1401 [Reserved]
- § 250.1402 Definitions.
- § 250.1403 What is the maximum civil penalty?
- § 250.1404 Which violations will BSEE review for potential civil penalties?
- § 250.1405 When is a case file developed?
- § 250.1406 When will BSEE notify me and provide penalty information?
- § 250.1407 How do I respond to the letter of notification?
- § 250.1408 When will I be notified of the Reviewing Officer's decision?
- § 250.1409 What are my appeal rights?
- 122 Federal Oil and Gas Royalty Management Act Civil Penalties Definitions
- § 250.1450 What definitions apply to this subpart?
- 123 Penalties After a Period To Correct
- § 250.1451 What may BSEE do if I violate a statute, regulation, order, or lease term relating to a Federal oil and gas lease?
- § 250.1452 What if I correct the violation?
- § 250.1453 What if I do not correct the violation?
- § 250.1454 How may I request a hearing on the record on a Notice of Noncompliance?
- § 250.1455 Does my request for a hearing on the record affect the penalties?
- § 250.1456 May I request a hearing on the record regarding the amount of a civil penalty if I did not request a hearing on the Notice of Noncompliance?
- 124 Penalties Without a Period To Correct
- § 250.1460 May I be subject to penalties without prior notice and an opportunity to correct?
- § 250.1461 How will BSEE inform me of violations without a period to correct?
- § 250.1462 How may I request a hearing on the record on a Notice of Noncompliance regarding violations without a period to correct?
- § 250.1463 Does my request for a hearing on the record affect the penalties?
- § 250.1464 May I request a hearing on the record regarding the amount of a civil penalty if I did not request a hearing on the Notice of Noncompliance?
- 125 General Provisions
- § 250.1470 How does BSEE decide what the amount of the penalty should be?
- § 250.1471 Does the penalty affect whether I owe interest?
- § 250.1472 How will the Office of Hearings and Appeals conduct the hearing on the record?
- § 250.1473 How may I appeal the Administrative Law Judge's decision?
- § 250.1474 May I seek judicial review of the decision of the Interior Board of Land Appeals?
- § 250.1475 When must I pay the penalty?
- § 250.1476 Can BSEE reduce my penalty once it is assessed?
- § 250.1477 How may BSEE collect the penalty?
- 126 Criminal Penalties
- § 250.1480 May the United States criminally prosecute me for violations under Federal oil and gas leases?
- Subpart O Well Control and Production Safety Training
- § 250.1500 Definitions.
- § 250.1501 What is the goal of my training program?
- § 250.1503 What are my general responsibilities for training?
- § 250.1504 May I use alternative training methods?
- § 250.1505 Where may I get training for my employees?
- § 250.1506 How often must I train my employees?
- § 250.1507 How will BSEE measure training results?
- § 250.1508 What must I do when BSEE administers written or oral tests?
- § 250.1509 What must I do when BSEE administers or requires hands-on, simulator, or other types of testing?
- § 250.1510 What will BSEE do if my training program does not comply with this subpart?
- Subpart P Sulphur Operations
- § 250.1600 Performance standard.
- § 250.1601-250.1634 [Reserved]
- Subpart Q Decommissioning Activities
- 127 General
- § 250.1700 What do the terms “decommissioning,” “obstructions,” “facility,” and “predecessor” mean in this subpart?
- § 250.1701 Who must meet the decommissioning obligations in this subpart?
- § 250.1702 When do I accrue decommissioning obligations?
- § 250.1703 What are the general requirements for decommissioning?
- § 250.1704 What decommissioning applications and reports must I submit and when must I submit them?
- §§ 250.1705-250.1707 [Reserved]
- § 250.1708 How will BSEE enforce accrued decommissioning obligations against predecessors?
- § 250.1709 [Reserved]
- 128 Permanently Plugging Wells
- § 250.1710 When must I permanently plug all wells on a lease?
- § 250.1711 When will BSEE order me to permanently plug a well?
- § 250.1712 What information must I submit before I permanently plug a well or zone?
- § 250.1713 [Reserved]
- § 250.1714 What must I accomplish with well plugs?
- § 250.1715 How must I permanently plug a well?
- § 250.1716 To what depth must I remove wellheads and casings?
- § 250.1717 [Reserved]
- 129 Temporary Abandoned Wells
- § 250.1721 If I temporarily abandon a well that I plan to re-enter, what must I do?
- § 250.1722 If I install a subsea protective device, what requirements must I meet?
- § 250.1723 What must I do when it is no longer necessary to maintain a well in temporary abandoned status?
- 130 Removing Platforms and Other Facilities
- § 250.1725 When do I have to remove platforms and other facilities?
- § 250.1726 When must I submit an initial platform removal application and what must it include?
- § 250.1727 What information must I include in my final application to remove a platform or other facility?
- § 250.1728 To what depth must I remove a platform or other facility?
- § 250.1729 After I remove a platform or other facility, what information must I submit?
- § 250.1730 When might BSEE approve partial structure removal or toppling in place?
- § 250.1731 Who is responsible for decommissioning an OCS facility subject to an Alternate Use RUE?
- 131 Site Clearance for Wells, Platforms, and Other Facilities
- § 250.1740 How must I verify that the site of a permanently plugged well, removed platform, or other removed facility is clear of obstructions?
- § 250.1741 If I drag a trawl across a site, what requirements must I meet?
- § 250.1742 What other methods can I use to verify that a site is clear?
- § 250.1743 How do I certify that a site is clear of obstructions?
- 132 Pipeline Decommissioning
- § 250.1750 When may I decommission a pipeline in place?
- § 250.1751 How do I decommission a pipeline in place?
- § 250.1752 How do I remove a pipeline?
- § 250.1753 After I decommission a pipeline, what information must I submit?
- § 250.1754 When must I remove a pipeline decommissioned in place?
- R Subpart R [Reserved]
- Subpart S Safety and Environmental Management Systems (SEMS)
- § 250.1900 Must I have a SEMS program?
- § 250.1901 What is the goal of my SEMS program?
- § 250.1902 What must I include in my SEMS program?
- § 250.1903 Acronyms and definitions.
- § 250.1904 Special instructions.
- §§ 250.1905-250.1908 [Reserved]
- § 250.1909 What are management's general responsibilities for the SEMS program?
- § 250.1910 What safety and environmental information is required?
- § 250.1911 What hazards analysis criteria must my SEMS program meet?
- § 250.1912 What criteria for management of change must my SEMS program meet?
- § 250.1913 What criteria for operating procedures must my SEMS program meet?
- § 250.1914 What criteria must be documented in my SEMS program for safe work practices and contractor selection?
- § 250.1915 What training criteria must be in my SEMS program?
- § 250.1916 What criteria for mechanical integrity must my SEMS program meet?
- § 250.1917 What criteria for pre-startup review must be in my SEMS program?
- § 250.1918 What criteria for emergency response and control must be in my SEMS program?
- § 250.1919 What criteria for investigation of incidents must be in my SEMS program?
- § 250.1920 What are the auditing requirements for my SEMS program?
- § 250.1921 What qualifications must the ASP meet?
- § 250.1922 What qualifications must an AB meet?
- § 250.1923 [Reserved]
- § 250.1924 How will BSEE determine if my SEMS program is effective?
- § 250.1925 May BSEE direct me to conduct additional audits?
- § 250.1926 [Reserved]
- § 250.1927 What happens if BSEE finds shortcomings in my SEMS program?
- § 250.1928 What are my recordkeeping and documentation requirements?
- § 250.1929 What are my responsibilities for submitting OCS performance measure data?
- § 250.1930 What must be included in my SEMS program for SWA?
- § 250.1931 What must be included in my SEMS program for UWA?
- § 250.1932 What are my EPP requirements?
- § 250.1933 What procedures must be included for reporting unsafe working conditions?
- PART 251 GEOLOGICAL AND GEOPHYSICAL (G&G) EXPLORATIONS OF THE OUTER CONTINENTAL SHELF
- § 251.1 Definitions.
- § 251.2 [Reserved]
- § 251.3 Authority and applicability of this part.
- §§ 251.4-251.6 [Reserved]
- § 251.7 Test drilling activities under a permit.
- §§ 251.8-251.14 [Reserved]
- § 251.15 Authority for information collection.
- PART 252 OUTER CONTINENTAL SHELF (OCS) OIL AND GAS INFORMATION PROGRAM
- § 252.1 Purpose.
- § 252.2 Definitions.
- § 252.3 Oil and gas data and information to be provided for use in the OCS Oil and Gas Information Program.
- § 252.4 Summary Report to affected States.
- § 252.5 Information to be made available to affected States.
- § 252.6 Freedom of Information Act requirements.
- § 252.7 Privileged and proprietary data and information to be made available to affected States.
- 253 PART 253 [RESERVED]
- PART 254 OIL-SPILL RESPONSE REQUIREMENTS FOR FACILITIES LOCATED SEAWARD OF THE COAST LINE
- Subpart A General
- § 254.1 Who must submit an oil spill response plan (OSRP)?
- § 254.2 When must I submit an OSRP?
- § 254.3 May I cover more than one facility in my OSRP?
- § 254.4 May I reference other documents in my OSRP?
- § 254.5 General response plan requirements.
- § 254.6 Definitions.
- § 254.7 How do I submit my OSRP to the BSEE?
- § 254.8 May I appeal decisions under this part?
- § 254.9 Authority for information collection.
- Subpart B Oil-Spill Response Plans for Outer Continental Shelf Facilities
- § 254.20 Purpose.
- § 254.21 How must I format my OSRP?
- § 254.22 What information must I include in the “Introduction and OSRP contents” section?
- § 254.23 What information must I include in the “Emergency response action plan” section?
- § 254.24 What information must I include in the “Equipment inventory” appendix?
- § 254.25 What information must I include in the “Contractual agreements” appendix?
- § 254.26 What information must I include in the “Worst case discharge scenario” appendix?
- § 254.27 What information must I include in the “Dispersant use plan” appendix?
- § 254.28 What information must I include in the “In situ burning plan” appendix?
- § 254.29 What information must I include in the “Training and drills” appendix?
- § 254.30 When must I revise my OSRP?
- Subpart C Related Requirements for Outer Continental Shelf Facilities
- § 254.40 Records.
- § 254.41 Training your response personnel.
- § 254.42 Exercises for your response personnel and equipment.
- § 254.43 Maintenance and periodic inspection of response equipment.
- § 254.44 Calculating response equipment effective daily recovery capacities.
- § 254.45 Verifying the capabilities of your response equipment.
- § 254.46 Whom do I notify if an oil spill occurs?
- § 254.47 Determining the volume of oil of your worst case discharge scenario.
- Subpart D Oil-Spill Response Requirements for Facilities Located in State Waters Seaward of the Coast Line
- § 254.50 Spill response plans for facilities located in State waters seaward of the coast line.
- § 254.51 Modifying an existing OCS OSRP.
- § 254.52 Following the format for an OCS OSRP.
- § 254.53 Submitting an OSRP developed under State requirements.
- § 254.54 Spill prevention for facilities located in State waters seaward of the coast line.
- § 254.55 Spill response plans for facilities located in Alaska State waters seaward of the coast line in the Chukchi and Beaufort Seas.
- Subpart E Oil-Spill Response Requirements for Facilities Located on the Arctic OCS
- § 254.65 Purpose.
- §§ 254.66-254.69 [Reserved]
- § 254.70 What are the additional requirements for facilities conducting exploratory drilling from a MODU on the Arctic OCS?
- §§ 254.71-254.79 [Reserved]
- § 254.80 What additional information must I include in the “Emergency response action plan” section for facilities conducting exploratory drilling from a MODU on the Arctic OCS?
- §§ 254.81-254.89 [Reserved]
- § 254.90 What are the additional requirements for exercises of your response personnel and equipment for facilities conducting exploratory drilling from a MODU on the Arctic OCS?
- PART 256 LEASING OF SULPHUR OR OIL AND GAS IN THE OUTER CONTINENTAL SHELF
- Subpart A Outer Continental Shelf Oil, Gas, and Sulphur Management, General
- § 256.1 Purpose.
- § 256.7 Cross references.
- Subpart B Assignments, Transfers, and Extensions
- § 256.70 Extension of lease by drilling or well reworking operations.
- § 256.71 Directional drilling.
- § 256.72 Compensatory payments as production.
- § 256.73 Effect of suspensions on lease term.
- Subpart C Termination of Leases
- § 256.77 Cancellation of leases.
- Subpart D Section 6 Leases
- § 256.79 Effect of regulations on lease.
- 259-260 PARTS 259-260 [RESERVED]
- PART 270 NONDISCRIMINATION IN THE OUTER CONTINENTAL SHELF
- § 270.1 Purpose.
- § 270.2 Application of this part.
- § 270.3 Definitions.
- § 270.4 Discrimination prohibited.
- § 270.5 Complaint.
- § 270.6 Process.
- § 270.7 Remedies.
- PART 280 PROSPECTING FOR MINERALS OTHER THAN OIL, GAS, AND SULPHUR ON THE OUTER CONTINENTAL SHELF
- A Subparts A-B [Reserved]
- Subpart C Obligations Under This Part
- 134 Interrupted Activities
- §§ 280.20-280.24 [Reserved]
- § 280.25 When may BSEE require me to stop activities under this part?
- § 280.26 When may I resume activities?
- § 280.27 When may BSEE cancel my permit?
- § 280.28 May I relinquish my permit?
- D Subparts D-E [Reserved]
- 281 PART 281 [RESERVED]
- PART 282 OPERATIONS IN THE OUTER CONTINENTAL SHELF FOR MINERALS OTHER THAN OIL, GAS, AND SULPHUR
- Subpart A General
- § 282.0 Authority for information collection.
- § 282.1 Purpose and authority.
- § 282.2 Scope.
- § 282.3 Definitions.
- § 282.4 [Reserved]
- § 282.5 Disclosure of data and information to the public.
- § 282.6 Disclosure of data and information to an adjacent State.
- § 282.7 Jurisdictional controversies.
- Subpart B Jurisdiction and Responsibilities of Director
- § 282.10 Jurisdiction and responsibilities of Director.
- § 282.11 Director's authority.
- § 282.12 Director's responsibilities.
- § 282.13 Suspension of production or other operations.
- § 282.14 Noncompliance, remedies, and penalties.
- § 282.15 [Reserved]
- Subpart C Obligations and Responsibilities of Lessees
- § 282.20 [Reserved]
- § 282.21 Plans, general.
- §§ 282.22-282.26 [Reserved]
- § 282.27 Conduct of operations.
- § 282.28 Environmental protection measures.
- §§ 282.29-282.30 [Reserved]
- § 282.31 Suspension of production or other operations.
- Subpart D Payments
- § 282.40 [Reserved]
- § 282.41 Method of royalty calculation.
- § 282.42 [Reserved]
- Subpart E Appeals
- § 282.50 Appeals.
- PART 285 RENEWABLE ENERGY AND ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF
- Subpart A General Provisions
- § 285.100 Authority.
- § 285.101 What is the purpose of this part?
- § 285.102 What are BSEE's responsibilities under this part?
- § 285.103 When may BSEE prescribe or approve departures from the regulations in this part?
- § 285.104 [Reserved]
- § 285.105 What are my responsibilities under this part?
- §§ 285.106-285.109 [Reserved]
- § 285.110 How do I submit applications, reports, or notices required by this part?
- § 285.111 When and how does BSEE charge me processing fees on a case-by-case basis?
- § 285.112 Definitions.
- § 285.113 How will data and information obtained by BSEE under this part be disclosed to the public?
- § 285.114 Paperwork Reduction Act statements—information collection.
- § 285.115 Documents incorporated by reference.
- § 285.116 Requests for information on the state of the offshore renewable energy industry.
- § 285.117 Severability.
- § 285.118 What are my appeal rights?
- B Subparts B and C [Reserved]
- Subpart D Lease and Grant Administration
- 158 Noncompliance and Cessation Orders
- § 285.400 What happens if I fail to comply with this part?
- § 285.401 When may BSEE issue a cessation order?
- § 285.402 What is the effect of a cessation order?
- § 285.403-285.405 [Reserved]
- 159 Responsibility for Fulfilling Obligations
- § 285.406 Who is responsible for fulfilling lease and grant obligations?
- § 285.407-285.414 [Reserved]
- 160 Lease or Grant Suspension
- § 285.415 What is a lease or grant suspension?
- § 285.416 [Reserved]
- § 285.417 When may BSEE order a suspension?
- § 285.418 How will BSEE issue a suspension?
- § 285.419 What are my immediate responsibilities if I receive a suspension order?
- § 285.420 What effect does a suspension order have on my payments?
- § 285.421 How long will a suspension be in effect?
- §§ 285.422-285.432 [Reserved]
- 161 Lease or Grant Termination
- § 285.433 What must I do after my lease or grant terminates?
- §§ 285.434-285.436 [Reserved]
- 162 Lease or Grant Cancellation
- § 285.437 When can my lease or grant be canceled?
- E Subpart E [Reserved]
- Subpart F Information Requirements
- §§ 285.600-285.601 [Reserved]
- § 285.602 What records must I maintain?
- §§ 285.603-285.613 [Reserved]
- 163 Activities Under an Approved SAP
- § 285.614 When may I begin conducting activities under my approved SAP?
- § 285.615 What other reports or notices must I submit to BSEE under my approved SAP?
- §§ 285.616-285.630 [Reserved]
- 164 Activities Under an Approved COP
- § 285.631 When must I initiate activities under an approved COP?
- § 285.632 What documents must I submit before I may construct and install facilities under my approved COP?
- § 285.633 How do I comply with my COP?
- §§ 285.634-285.635 [Reserved]
- § 285.636 What notices must I provide BSEE following approval of my COP?
- § 285.637 When may I commence commercial operations on my commercial lease?
- § 285.638 What must I do upon completion of my commercial operations as approved in my COP or FERC license?
- §§ 285.639-285.649 [Reserved]
- 165 Activities Under an Approved GAP
- § 285.650 When may I begin conducting activities under my GAP?
- § 285.651 When may I construct complex or significant OCS facilities on my limited lease or any facilities on my project easement proposed under my GAP?
- § 285.652 [Reserved]
- § 285.653 What other reports or notices must I submit to BSEE under my approved GAP?
- §§ 285.654-285.659 [Reserved]
- Subpart G Facility Design, Fabrication, and Installation
- 166 Reports
- § 285.700 What reports must I submit to BSEE before installing facilities described in my approved SAP, COP, or GAP?
- § 285.701 What must I include in my Facility Design Report?
- § 285.702 What must I include in my Fabrication and Installation Report?
- § 285.703 What reports must I submit for project modifications and repairs?
- § 285.704 After receiving the FDR, FIR, or project verification reports, what will BSEE do?
- 167 Certified Verification Agent
- § 285.705 When must I use a Certified Verification Agent (CVA)?
- § 285.706 How do I nominate a CVA for BSEE approval?
- § 285.707 What are the CVA's primary duties for facility design review?
- § 285.708 What are the CVA's or project engineer's primary duties for fabrication and installation review?
- § 285.709 When conducting onsite fabrication inspections, what must the CVA or project engineer verify?
- § 285.710 When conducting onsite installation inspections, what must the CVA or project engineer do?
- § 285.711 [Reserved]
- § 285.712 What are the CVA's or project engineer's reporting requirements?
- § 285.713 [Reserved]
- § 285.714 What records relating to FDRs, FIRs, and Project Modification and Repair Reports must I keep?
- Subpart H Environmental and Safety Management, Inspections, and Facility Assessments for Activities Conducted Under SAPs, COPs and GAPs
- § 285.800 How must I conduct my activities to comply with safety and environmental requirements?
- § 285.801 How must I conduct my approved activities to protect marine mammals, threatened and endangered species, and designated critical habitat?
- § 285.802 What must I do if I discover a potential archaeological resource while conducting my approved activities?
- § 285.803 How must I conduct my approved activities to protect essential fish habitats identified and described under the Magnuson-Stevens Fishery Conservation and Management Act?
- §§ 285.804-285.809 [Reserved]
- 168 Safety Management Systems
- § 285.810 When must I submit a Safety Management System (SMS) and what must I include in my SMS?
- § 285.811 Am I required to obtain a certification of my SMS?
- § 285.812 How must I implement my SMS?
- 169 Maintenance and Shutdowns
- § 285.813 When do I have to report removing equipment from service?
- § 285.814 [Reserved]
- 170 Equipment Failure and Adverse Environmental Effects
- § 285.815 What must I do if I have facility damage or an equipment failure?
- § 285.816 What must I do if environmental or other conditions adversely affect a cable, pipeline, or facility?
- §§ 285.817-285.819 [Reserved]
- 171 Inspections and Assessments
- § 285.820 Will BSEE conduct inspections?
- § 285.821 Will BSEE conduct scheduled and unscheduled inspections?
- § 285.822 What must I do when BSEE conducts an inspection?
- § 285.823 Will BSEE reimburse me for my expenses related to inspections?
- § 285.824 How must I conduct self-inspections?
- § 285.825 When must I assess my facilities?
- §§ 285.826-285.829 [Reserved]
- 172 Incident Reporting and Investigation
- § 285.830 What are my incident reporting requirements?
- § 285.831 What incidents must I report, and when must I report them?
- § 285.832 How do I report incidents requiring immediate notification?
- § 285.833 What are the reporting requirements for incidents requiring written notification?
- Subpart I Decommissioning
- 173 Decommissioning Obligations and Requirements
- § 285.900 Who must meet the decommissioning obligations in this subpart?
- § 285.901 When do I accrue decommissioning obligations?
- § 285.902 What are the general requirements for decommissioning for facilities authorized under my SAP, COP, or GAP?
- § 285.903 What are the requirements for decommissioning FERC-licensed hydrokinetic facilities?
- § 285.904 Can I request a departure from the decommissioning requirements?
- 174 Decommissioning Applications
- § 285.905 When must I submit my decommissioning application?
- § 285.906 What must my decommissioning application include?
- § 285.907 How will BSEE process my decommissioning application?
- § 285.908 What must I include in my decommissioning notice?
- 175 Facility Removal
- § 285.909 When may facilities remain in place following termination of a lease or grant?
- § 285.910 What must I do when I remove my facility?
- § 285.911 [Reserved]
- 176 Decommissioning Report
- § 285.912 After I remove a facility, cable, or pipeline, what information must I submit?
- 177 Compliance With an Approved Decommissioning Application
- § 285.913 What happens if I fail to comply with my approved decommissioning application?
- Subpart J Rights of Use and Easement for Energy- and Marine-Related Activities Using Existing OCS Facilities
- 178 Regulated Activities
- § 285.1000 What activities does this subpart regulate?
- §§ 285.1001-285.1013 [Reserved]
- 179 Alternate Use RUE Administration
- § 285.1014 When will BSEE suspend an Alternate Use RUE?
- § 285.1015 [Reserved]
- § 285.1016 When will an Alternate Use RUE be cancelled?
- § 285.1017 [Reserved]
- 180 Decommissioning an Alternate Use RUE
- § 285.1018 Who is responsible for decommissioning an OCS facility subject to an Alternate Use RUE?
- § 285.1019 What are the decommissioning requirements for an Alternate Use RUE?
- SUBCHAPTER C APPEALS
- PART 290 APPEAL PROCEDURES
- Subpart A Bureau of Safety and Environmental Enforcement Appeal Procedures
- § 290.1 What is the purpose of this subpart?
- § 290.2 Who may appeal?
- § 290.3 What is the time limit for filing an appeal?
- § 290.4 How do I file an appeal?
- § 290.5 Can I obtain an extension for filing my Notice of Appeal?
- § 290.6 Are informal resolutions permitted?
- § 290.7 Do I have to comply with the decision or order while my appeal is pending?
- § 290.8 How do I exhaust my administrative remedies?
- B Subpart B [Reserved]
- PART 291 OPEN AND NONDISCRIMINATORY ACCESS TO OIL AND GAS PIPELINES UNDER THE OUTER CONTINENTAL SHELF LANDS ACT
- § 291.1 What is BSEE's authority to collect information?
- § 291.100 What is the purpose of this part?
- § 291.101 What definitions apply to this part?
- § 291.102 May I call the BSEE Hotline to informally resolve an allegation that open and nondiscriminatory access was denied?
- § 291.103 May I use alternative dispute resolution (ADR) to informally resolve an allegation that open and nondiscriminatory access was denied?
- § 291.104 Who may file a complaint or a third-party brief?
- § 291.105 What must a complaint contain?
- § 291.106 How do I file a complaint?
- § 291.107 How do I answer a complaint?
- § 291.108 How do I pay the processing fee?
- § 291.109 Can I ask for a fee waiver or a reduced processing fee?
- § 291.110 Who may BSEE require to produce information?
- § 291.111 How does BSEE treat the confidential information I provide?
- § 291.112 What process will BSEE follow in rendering a decision on whether a grantee or transporter has provided open and nondiscriminatory access?
- § 291.113 What actions may BSEE take to remedy denial of open and nondiscriminatory access?
- § 291.114 How do I appeal to the IBLA?
- § 291.115 How do I exhaust administrative remedies?
- 292-299 PARTS 292-299 [RESERVED]
- CHAPTER IV GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR
- 400 PART 400 [RESERVED]
- PART 401 STATE WATER RESEARCH INSTITUTE PROGRAM
- Subpart A General
- § 401.1 Purpose.
- § 401.2 Delegation of authority.
- § 401.3 Definitions.
- § 401.4 Information collection.
- § 401.5 [Reserved]
- Subpart B Designation of Institutes; Institute Programs
- § 401.6 Designation of institutes.
- § 401.7 Programs of institutes.
- §§ 401.8-401.10 [Reserved]
- Subpart C Application and Management Procedures
- § 401.11 Applications for grants.
- § 401.12 Program management.
- §§ 401.13-401.18 [Reserved]
- Subpart D Reporting
- § 401.19 Reporting procedures.
- §§ 401.20-401.25 [Reserved]
- Subpart E Evaluation
- § 401.26 Evaluation of institutes.
- PART 402 WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM
- Subpart A General
- § 402.1 Purpose.
- § 402.2 Delegation of authority.
- § 402.3 Definitions.
- § 402.4 Information collection.
- § 402.5 [Reserved]
- Subpart B Description of Water-Resources Programs
- § 402.6 Water-Resources Research Program.
- § 402.7 Water-Resources Technology Development Program.
- §§ 402.8-402.9 [Reserved]
- Subpart C Application, Evaluation, and Management Procedures
- § 402.10 Research-project applications.
- § 402.11 Technology-development project applications.
- § 402.12 Evaluation of applications for grants and contracts.
- § 402.13 Program management.
- § 402.14 [Reserved]
- Subpart D Reporting
- § 402.15 Reporting procedures.
- 403-499 PARTS 403-499 [RESERVED]
- CHAPTER V BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR
- SUBCHAPTER A MINERALS REVENUE MANAGEMENT
- 500-519 PARTS 500-519 [RESERVED]
- SUBCHAPTER B OFFSHORE
- PART 550 OIL AND GAS AND SULFUR OPERATIONS IN THE OUTER CONTINENTAL SHELF
- Subpart A General
- 210 Authority and Definition of Terms
- § 550.101 Authority and applicability.
- § 550.102 What does this part do?
- § 550.103 Where can I find more information about the requirements in this part?
- § 550.104 How may I appeal a decision made under BOEM regulations?
- § 550.105 Definitions.
- 211 Performance Standards
- § 550.115 How do I determine well producibility?
- § 550.116 How do I determine producibility if my well is in the Gulf of America?
- § 550.117 How does a determination of well producibility affect royalty status?
- § 550.118 [Reserved]
- § 550.119 Will BOEM approve subsurface gas storage?
- § 550.120 What standards will BOEM use to regulate leases, rights-of-use and easement, and rights-of-way?
- § 550.121 What must I do to protect health, safety, property, and the environment?
- § 550.122 What effect does subsurface storage have on the lease term?
- § 550.123 Will BOEM allow gas storage on unleased lands?
- 212 Fees
- § 550.125 Service fees.
- § 550.126 Electronic payment instructions.
- 213 Inspection of Operations
- § 550.130 [Reserved]
- 214 Disqualification
- § 550.135 What will BOEM do if my operating performance is unacceptable?
- § 550.136 How will BOEM determine if my performance is unacceptable?
- 215 Special Types of Approvals
- § 550.140 When will I receive an oral approval?
- § 550.141 May I ever use alternate procedures or equipment?
- § 550.142 How do I receive approval for departures?
- § 550.143 How do I designate an operator?
- § 550.144 How do I designate a new operator when a designation of operator terminates?
- § 550.146 How do I designate an agent or a local agent?
- § 550.147 Who is responsible for fulfilling leasehold obligations?
- 216 Right-of-Use and Easement
- § 550.160 When will BOEM grant me a right-of-use and easement (RUE), and what requirements must I meet?
- § 550.161 What else must I submit with my application?
- § 550.162 May I continue my right-of-use and easement after the termination of any lease on which it is situated?
- § 550.163 If I have a State lease, will BOEM grant me a right-of-use and easement?
- § 550.164 If I have a State lease, what conditions apply for a right-of-use and easement?
- § 550.165 If I have a State lease, what fees do I have to pay for a right-of-use and easement?
- § 550.166 If BOEM grants me a RUE, what financial assurance must I provide?
- § 550.167 How may I obtain or assign my interest in a RUE?
- 217 Primary Lease Requirements, Lease Term Extensions, and Lease Cancellations
- § 550.181 When may the Secretary cancel my lease and when am I compensated for cancellation?
- § 550.182 When may the Secretary cancel a lease at the exploration stage?
- § 550.183 When may BOEM or the Secretary extend or cancel a lease at the development and production stage?
- § 550.184 What is the amount of compensation for lease cancellation?
- § 550.185 When is there no compensation for a lease cancellation?
- 218 Information and Reporting Requirements
- § 550.186 What reporting information and report forms must I submit?
- §§ 550.187-550.193 [Reserved]
- § 550.194 How must I protect archaeological resources?
- § 550.195 [Reserved]
- § 550.196 Reimbursements for reproduction and processing costs.
- § 550.197 Data and information to be made available to the public or for limited inspection.
- 219 References
- § 550.198 [Reserved]
- § 550.199 Paperwork Reduction Act statements—information collection.
- Subpart B Plans and Information
- 220 General Information
- § 550.200 Definitions.
- § 550.201 What plans and information must I submit before I conduct any activities on my lease or unit?
- § 550.202 What criteria must the Exploration Plan (EP), Development and Production Plan (DPP), or Development Operations Coordination Document (DOCD) meet?
- § 550.203 Where can wells be located under an EP, DPP, or DOCD?
- § 550.204 When must I submit my IOP for proposed Arctic exploratory drilling operations and what must the IOP include?
- § 550.205 [Reserved]
- § 550.206 How do I submit the IOP, EP, DPP, or DOCD?
- 221 Ancillary Activities
- § 550.207 What ancillary activities may I conduct?
- § 550.208 If I conduct ancillary activities, what notices must I provide?
- § 550.209 What is the BOEM review process for the notice?
- § 550.210 If I conduct ancillary activities, what reporting and data/information retention requirements must I satisfy?
- 222 Contents of Exploration Plans (EP)
- § 550.211 What must the EP include?
- § 550.212 What information must accompany the EP?
- § 550.213 What general information must accompany the EP?
- § 550.214 What geological and geophysical (G&G) information must accompany the EP?
- § 550.215 What hydrogen sulfide (H2S) information must accompany the EP?
- § 550.216 What biological, physical, and socioeconomic information must accompany the EP?
- § 550.217 What solid and liquid wastes and discharges information and cooling water intake information must accompany the EP?
- § 550.218 What air emissions information must accompany the EP?
- § 550.219 What oil and hazardous substance spills information must accompany the EP?
- § 550.220 If I propose activities in the Alaska OCS Region, what planning information must accompany the EP?
- § 550.221 What environmental monitoring information must accompany the EP?
- § 550.222 What lease stipulations information must accompany the EP?
- § 550.223 What mitigation measures information must accompany the EP?
- § 550.224 What information on support vessels, offshore vehicles, and aircraft you will use must accompany the EP?
- § 550.225 What information on the onshore support facilities you will use must accompany the EP?
- § 550.226 What Coastal Zone Management Act (CZMA) information must accompany the EP?
- § 550.227 What environmental impact analysis (EIA) information must accompany the EP?
- § 550.228 What administrative information must accompany the EP?
- 223 Review and Decision Process for the EP
- § 550.231 After receiving the EP, what will BOEM do?
- § 550.232 What actions will BOEM take after the EP is deemed submitted?
- § 550.233 What decisions will BOEM make on the EP and within what timeframe?
- § 550.234 How do I submit a modified EP or resubmit a disapproved EP, and when will BOEM make a decision?
- § 550.235 If a State objects to the EP's coastal zone consistency certification, what can I do?
- 224 Contents of Development and Production Plans (DPP) and Development Operations Coordination Documents (DOCD)
- § 550.241 What must the DPP or DOCD include?
- § 550.242 What information must accompany the DPP or DOCD?
- § 550.243 What general information must accompany the DPP or DOCD?
- § 550.244 What geological and geophysical (G&G) information must accompany the DPP or DOCD?
- § 550.245 What hydrogen sulfide (H2S) information must accompany the DPP or DOCD?
- § 550.246 What mineral resource conservation information must accompany the DPP or DOCD?
- § 550.247 What biological, physical, and socioeconomic information must accompany the DPP or DOCD?
- § 550.248 What solid and liquid wastes and discharges information and cooling water intake information must accompany the DPP or DOCD?
- § 550.249 What air emissions information must accompany the DPP or DOCD?
- § 550.250 What oil and hazardous substance spills information must accompany the DPP or DOCD?
- § 550.251 If I propose activities in the Alaska OCS Region, what planning information must accompany the DPP?
- § 550.252 What environmental monitoring information must accompany the DPP or DOCD?
- § 550.253 What lease stipulations information must accompany the DPP or DOCD?
- § 550.254 What mitigation measures information must accompany the DPP or DOCD?
- § 550.255 What decommissioning information must accompany the DPP or DOCD?
- § 550.256 What related facilities and operations information must accompany the DPP or DOCD?
- § 550.257 What information on the support vessels, offshore vehicles, and aircraft you will use must accompany the DPP or DOCD?
- § 550.258 What information on the onshore support facilities you will use must accompany the DPP or DOCD?
- § 550.259 What sulphur operations information must accompany the DPP or DOCD?
- § 550.260 What Coastal Zone Management Act (CZMA) information must accompany the DPP or DOCD?
- § 550.261 What environmental impact analysis (EIA) information must accompany the DPP or DOCD?
- § 550.262 What administrative information must accompany the DPP or DOCD?
- 225 Review and Decision Process for the DPP or DOCD
- § 550.266 After receiving the DPP or DOCD, what will BOEM do?
- § 550.267 What actions will BOEM take after the DPP or DOCD is deemed submitted?
- § 550.268 How does BOEM respond to recommendations?
- § 550.269 How will BOEM evaluate the environmental impacts of the DPP or DOCD?
- § 550.270 What decisions will BOEM make on the DPP or DOCD and within what timeframe?
- § 550.271 For what reasons will BOEM disapprove the DPP or DOCD?
- § 550.272 If a State objects to the DPP's or DOCD's coastal zone consistency certification, what can I do?
- § 550.273 How do I submit a modified DPP or DOCD or resubmit a disapproved DPP or DOCD?
- 226 Post-Approval Requirements for the EP, DPP, and DOCD
- § 550.280 How must I conduct activities under the approved EP, DPP, or DOCD?
- § 550.281 What must I do to conduct activities under the approved EP, DPP, or DOCD?
- § 550.282 Do I have to conduct post-approval monitoring?
- § 550.283 When must I revise or supplement the approved EP, DPP, or DOCD?
- § 550.284 How will BOEM require revisions to the approved EP, DPP, or DOCD?
- § 550.285 How do I submit revised and supplemental EPs, DPPs, and DOCDs?
- §§ 550.286-550.295 [Reserved]
- 227 Conservation Information Documents (CID)
- § 550.296 When and how must I submit a CID or a revision to a CID?
- § 550.297 What information must a CID contain?
- § 550.298 How long will BOEM take to evaluate and make a decision on the CID?
- § 550.299 What operations require approval of the CID?
- Subpart C Pollution Prevention and Control
- §§ 550.300-550.301 [Reserved]
- § 550.302 Definitions concerning air quality.
- § 550.303 Facilities described in a new or revised Exploration Plan, Development and Production Plan, or Development Operations Coordination Document.
- § 550.304 Existing facilities.
- Subpart D Leasing Maps and Diagrams
- § 550.400 Leasing maps and diagrams.
- E Subparts E-I [Reserved]
- Subpart J Pipelines and Pipeline Rights-of-Way
- § 550.1011 Financial assurance requirements for pipeline right-of-way (ROW) grant holders.
- Subpart K Oil and Gas Production Requirements.
- 228 Well Tests and Surveys
- § 550.1153 When must I conduct a static bottomhole pressure survey?
- 229 Classifying Reservoirs
- § 550.1154 How do I determine if my reservoir is sensitive?
- § 550.1155 What information must I submit for sensitive reservoirs?
- 230 Other Requirements
- § 550.1165 What must I do for enhanced recovery operations?
- § 550.1166 What additional reporting is required for developments in the Alaska OCS Region?
- § 550.1167 What information must I submit with forms and for approvals?
- L Subparts L-M [Reserved]
- Subpart N Outer Continental Shelf Civil Penalties
- 231 Outer Continental Shelf Lands Act Civil Penalties
- § 550.1400 How does BOEM begin the civil penalty process?
- § 550.1401 Index table.
- § 550.1402 Definitions.
- § 550.1403 What is the maximum civil penalty?
- § 550.1404 Which violations will BOEM review for potential civil penalties?
- § 550.1405 When is a case file developed?
- § 550.1406 When will BOEM notify me and provide penalty information?
- § 550.1407 How do I respond to the letter of notification?
- § 550.1408 When will I be notified of the Reviewing Officer's decision?
- § 550.1409 What are my appeal rights?
- 232 Federal Oil and Gas Royalty Management Act Civil Penalties Definitions
- § 550.1450 What definitions apply to this subpart?
- 233 Penalties After a Period to Correct
- § 550.1451 What may BOEM do if I violate a statute, regulation, order, or lease term relating to a Federal oil and gas lease?
- § 550.1452 What if I correct the violation?
- § 550.1453 What if I do not correct the violation?
- § 550.1454 How may I request a hearing on the record on a Notice of Noncompliance?
- § 550.1455 Does my request for a hearing on the record affect the penalties?
- § 550.1456 May I request a hearing on the record regarding the amount of a civil penalty if I did not request a hearing on the Notice of Noncompliance?
- 234 Penalties Without a Period to Correct
- § 550.1460 May I be subject to penalties without prior notice and an opportunity to correct?
- § 550.1461 How will BOEM inform me of violations without a period to correct?
- § 550.1462 How may I request a hearing on the record on a Notice of Noncompliance regarding violations without a period to correct?
- § 550.1463 Does my request for a hearing on the record affect the penalties?
- § 550.1464 May I request a hearing on the record regarding the amount of a civil penalty if I did not request a hearing on the Notice of Noncompliance?
- 235 General Provisions
- § 550.1470 How does BOEM decide what the amount of the penalty should be?
- § 550.1471 Does the penalty affect whether I owe interest?
- § 550.1472 How will the Office of Hearings and Appeals conduct the hearing on the record?
- § 550.1473 How may I appeal the Administrative Law Judge's decision?
- § 550.1474 May I seek judicial review of the decision of the Interior Board of Land Appeals?
- § 550.1475 When must I pay the penalty?
- § 550.1476 Can BOEM reduce my penalty once it is assessed?
- § 550.1477 How may BOEM collect the penalty?
- 236 Criminal Penalties
- § 550.1480 May the United States criminally prosecute me for violations under Federal oil and gas leases?
- 237 Bonding Requirements
- § 550.1490 What standards must my BOEM-specified surety instrument meet?
- § 550.1491 How will BOEM determine the amount of my bond or other surety instrument?
- 238 Financial Solvency Requirements
- § 550.1495 How do I demonstrate financial solvency?
- § 550.1496 How will BOEM determine if I am financially solvent?
- § 550.1497 When will BOEM monitor my financial solvency?
- O Subparts O-S [Reserved]
- PART 551 GEOLOGICAL AND GEOPHYSICAL (G&G) EXPLORATIONS OF THE OUTER CONTINENTAL SHELF
- § 551.1 Definitions.
- § 551.2 Purpose of this part.
- § 551.3 Authority and applicability of this part.
- § 551.4 Types of G&G activities that require permits or Notices.
- § 551.5 Applying for permits or filing Notices.
- § 551.6 Obligations and rights under a permit or a Notice.
- § 551.7 Test drilling activities under a permit.
- § 551.8 Inspection and reporting requirements for activities under a permit.
- § 551.9 Temporarily stopping, canceling, or relinquishing activities approved under a permit.
- § 551.10 Penalties and appeals.
- § 551.11 Submission, inspection, and selection of geological data and information collected under a permit and processed by permittees or third parties.
- § 551.12 Submission, inspection, and selection of geophysical data and information collected under a permit and processed by permittees or third parties.
- § 551.13 Reimbursement for the costs of reproducing data and information and certain processing costs.
- § 551.14 Protecting and disclosing data and information submitted to BOEM under a permit.
- § 551.15 Authority for information collection.
- PART 552 OUTER CONTINENTAL SHELF (OCS) OIL AND GAS INFORMATION PROGRAM
- § 552.1 Purpose.
- § 552.2 Definitions.
- § 552.3 Oil and gas data and information to be provided for use in the OCS Oil and Gas Information Program.
- § 552.4 Summary Report to affected States.
- § 552.5 Information to be made available to affected States.
- § 552.6 Freedom of Information Act requirements.
- § 552.7 Privileged and proprietary data and information to be made available to affected States.
- PART 553 OIL SPILL FINANCIAL RESPONSIBILITY FOR OFFSHORE FACILITIES
- Subpart A General
- § 553.1 What is the purpose of this part?
- § 553.3 How are the terms used in this regulation defined?
- § 553.5 What is the authority for collecting Oil Spill Financial Responsibility (OSFR) information?
- Subpart B Applicability and Amount of OSFR
- § 553.10 What facilities does this part cover?
- § 553.11 Who must demonstrate OSFR?
- § 553.12 May I ask BOEM for a determination of whether I must demonstrate OSFR?
- § 553.13 How much OSFR must I demonstrate?
- § 553.14 How do I determine the worst case oil-spill discharge volume?
- § 553.15 What are my general OSFR compliance responsibilities?
- Subpart C Methods for Demonstrating OSFR
- § 553.20 What methods may I use to demonstrate OSFR?
- § 553.21 How can I use self-insurance as OSFR evidence?
- § 553.22 How do I apply to use self-insurance as OSFR evidence?
- § 553.23 What information must I submit to support my net worth demonstration?
- § 553.24 When I submit audited annual financial statements to verify my net worth, what standards must they meet?
- § 553.25 What financial test procedures must I use to determine the amount of self-insurance allowed as OSFR evidence based on net worth?
- § 553.26 What information must I submit to support my unencumbered assets demonstration?
- § 553.27 When I submit audited annual financial statements to verify my unencumbered assets, what standards must they meet?
- § 553.28 What financial test procedures must I use to evaluate the amount of self-insurance allowed as OSFR evidence based on unencumbered assets?
- § 553.29 How can I use insurance as OSFR evidence?
- § 553.30 How can I use an indemnity as OSFR evidence?
- § 553.31 How can I use a surety bond as OSFR evidence?
- § 553.32 Are there alternative methods to demonstrate OSFR?
- Subpart D Requirements for Submitting OSFR Information
- § 553.40 What OSFR evidence must I submit to BOEM?
- § 553.41 What terms must I include in my OSFR evidence?
- § 553.42 How can I amend my list of COFs?
- § 553.43 When is my OSFR demonstration or the amendment to my OSFR demonstration effective?
- § 553.44 [Reserved]
- § 553.45 Where do I send my OSFR evidence?
- Subpart E Revocation and Penalties
- § 553.50 How can BOEM refuse or invalidate my OSFR evidence?
- § 553.51 What are the penalties for not complying with this part?
- Subpart F Claims for Oil-Spill Removal Costs and Damages
- § 553.60 To whom may I present a claim?
- § 553.61 When is a guarantor subject to direct action for claims?
- § 553.62 What are the designated applicant's notification obligations regarding a claim?
- Subpart G Limit of Liability for Offshore Facilities
- § 553.700 What is the scope of this subpart?
- § 553.701 To which entities does this subpart apply?
- § 553.702 What limit of liability applies to my offshore facility?
- § 553.703 What is the procedure for calculating the limit of liability adjustment for inflation?
- § 553.704 How will BOEM publish the offshore facility limit of liability adjustment?
- Appendix to Part 553 List of U.S. Geological Survey Topographic Maps
- PART 556 LEASING OF SULFUR OR OIL AND GAS AND FINANCIAL ASSURANCE REQUIREMENTS IN THE OUTER CONTINENTAL SHELF
- Subpart A General Provisions
- § 556.100 Statement of policy.
- § 556.101 Purpose.
- § 556.102 Authority.
- § 556.103 [Reserved]
- § 556.104 Information collection and proprietary information.
- § 556.105 Acronyms and definitions.
- § 556.106 Service fees.
- § 556.107 Corporate seal requirements.
- Subpart B Oil and Gas Five Year Leasing Program
- § 556.200 What is the Five Year leasing program?
- § 556.201 Does BOEM consider multiple uses of the OCS?
- § 556.202 How does BOEM start the Five Year program preparation process?
- § 556.203 What does BOEM do before publishing a proposed Five Year program?
- § 556.204 How do governments and citizens comment on a proposed Five Year program?
- § 556.205 What does BOEM do before approving a proposed final Five Year program or a significant revision of a previously-approved Five Year program?
- Subpart C Planning and Holding a Lease Sale
- § 556.300 What reports may BOEM and other Federal agencies prepare before a lease sale?
- § 556.301 What is a Call for Information and Nominations?
- § 556.302 What does BOEM do with the information from the Call?
- § 556.303 What does BOEM do if an area proposed for leasing is within three nautical miles of the seaward boundary of a coastal State?
- § 556.304 How is a proposed notice of sale prepared?
- § 556.305 How does BOEM coordinate and consult with States regarding a proposed notice of sale?
- § 556.306 What if a potentially oil- or gas-bearing area underlies both the OCS and lands subject to State jurisdiction?
- § 556.307 What does BOEM do with comments and recommendations received on the proposed notice of sale?
- § 556.308 How does BOEM conduct a lease sale?
- § 556.309 Does BOEM offer blocks in a sale that is not on the Five Year program schedule (called a Supplemental Sale)?
- Subpart D Qualifications
- § 556.400 When must I demonstrate that I am qualified to hold a lease on the OCS?
- § 556.401 What do I need to show to become qualified to hold a lease on the OCS and obtain a qualification number?
- § 556.402 How do I make the necessary showing to qualify and obtain a qualification number?
- § 556.403 Under what circumstances may I be disqualified from acquiring a lease or an interest in a lease on the OCS?
- § 556.404 What do the non-procurement debarment rules require that I do?
- § 556.405 When must I notify BOEM of mergers, name changes, or changes of business form?
- Subpart E Issuance of a Lease
- 246 How To Bid
- § 556.500 Once qualified, how do I submit a bid?
- § 556.501 What information do I need to submit with my bid?
- 247 Restrictions on Joint Bidding
- § 556.511 Are there restrictions on bidding with others and do those restrictions affect my ability to bid?
- § 556.512 What bids may be disqualified?
- § 556.513 When must I file a statement of production?
- § 556.514 How do I determine my production for purposes of the restricted joint bidders list?
- § 556.515 May a person be exempted from joint bidding restrictions?
- 248 How Does BOEM Act on Bids?
- § 556.516 What does BOEM do with my bid?
- § 556.517 What may I do if my high bid is rejected?
- 249 Awarding the Lease
- § 556.520 What happens if I am the successful high bidder and BOEM accepts my bid?
- § 556.521 When is my lease effective?
- § 556.522 What are the terms and conditions of the lease and when are they published?
- Subpart F Lease Term and Obligations
- 250 Length of Lease
- § 556.600 What is the primary term of my oil and gas lease?
- § 556.601 How may I maintain my oil and gas lease beyond the primary term?
- § 556.602 What is the primary term of my sulfur lease?
- § 556.603 How may I maintain my sulfur lease beyond the primary term?
- 251 Lease Obligations
- § 556.604 What are my rights and obligations as a record title owner?
- § 556.605 What are my rights and obligations as an operating rights owner?
- 252 Helium
- § 556.606 What must a lessee do if BOEM elects to extract helium from a lease?
- Subpart G Transferring All or Part of the Record Title Interest in a Lease
- § 556.700 May I assign or sublease all or any part of the record title interest in my lease?
- § 556.701 How do I seek approval of an assignment of the record title interest in my lease, or a severance of operating rights from that record title interest?
- § 556.702 When will my assignment result in a segregated lease?
- § 556.703 What is the effect of the approval of the assignment of 100 percent of the record title in a particular aliquot(s) of my lease and of the resulting lease segregation?
- § 556.704 When may BOEM disapprove an assignment or sublease of an interest in my lease?
- § 556.705 How do I transfer the interest of a deceased natural person who was a lessee?
- § 556.706 What if I want to transfer record title interests in more than one lease at the same time, but to different parties?
- § 556.707 What if I want to transfer different types of lease interests (not only record title interests) in the same lease to different parties?
- § 556.708 What if I want to transfer my record title interests in more than one lease to the same party?
- § 556.709 What if I want to transfer my record title interest in one lease to multiple parties?
- § 556.710 What is the effect of an assignment of a lease on an assignor's liability under the lease?
- § 556.711 What is the effect of a record title holder's sublease of operating rights on the record title holder's liability?
- § 556.712 What is the effective date of a transfer?
- § 556.713 What is the effect of an assignment of a lease on an assignee's liability under the lease?
- § 556.714 As a restricted joint bidder, may I transfer an interest to another restricted joint bidder?
- § 556.715 Are there any interests I may transfer or record without BOEM approval?
- § 556.716 What must I do with respect to the designation of operator on a lease when a transfer of record title is submitted?
- Subpart H Transferring All or Part of the Operating Rights in a Lease
- § 556.800 As an operating rights owner, may I assign all or part of my operating rights interest?
- § 556.801 How do I seek approval of an assignment of my operating rights?
- § 556.802 When may BOEM disapprove the transfer of all or part of my operating rights interest?
- § 556.803 What if I want to assign operating rights interests in more than one lease at the same time, but to different parties?
- § 556.804 What if I want to assign my operating rights interest in a lease to multiple parties?
- § 556.805 What is the effect of an operating rights owner's assignment of operating rights on the assignor's liability?
- § 556.806 What is the effective date of an assignment of operating rights?
- § 556.807 What is the effect of an assignment of operating rights on an assignee's liability?
- § 556.808 As an operating rights owner, are there any interests I may assign without BOEM approval?
- § 556.809 [Reserved]
- § 556.810 What must I do with respect to the designation of operator on a lease when a transfer of operating rights ownership is submitted?
- Subpart I Financial Assurance
- § 556.900 Financial assurance requirements for an oil and gas or sulfur lease.
- § 556.901 Base and supplemental financial assurance.
- § 556.902 General requirements for bonds or other financial assurance.
- § 556.903 Lapse of financial assurance.
- § 556.904 Decommissioning accounts.
- § 556.905 Third-party guarantees.
- § 556.906 Termination of the period of liability and cancellation of financial assurance.
- § 556.907 Forfeiture of bonds or other financial assurance.
- Subpart J Bonus or Royalty Credits for Exchange of Certain Leases
- § 556.1000 Leases formerly eligible for a bonus or royalty credit.
- Subpart K Ending a Lease
- § 556.1100 How does a lease expire?
- § 556.1101 May I relinquish my lease or an aliquot part thereof?
- § 556.1102 Under what circumstances will BOEM cancel my lease?
- Subpart L Leases Maintained Under Section 6 of OCSLA
- § 556.1200 Effect of regulations on lease.
- § 556.1201 Section 6(a) leases and leases other than those for oil, gas, or sulfur.
- Subpart M Environmental Studies
- § 556.1300 Environmental studies.
- PART 560 OUTER CONTINENTAL SHELF OIL AND GAS LEASING
- Subpart A General Provisions
- § 560.100 Authority.
- § 560.101 What is the purpose of this part?
- § 560.102 What definitions apply to this part?
- § 560.103 What is BOEM's authority to collect information?
- Subpart B Bidding Systems
- 257 General Provisions
- § 560.200 What is the purpose of this subpart?
- § 560.201 What definitions apply to this subpart?
- § 560.202 What bidding systems may BOEM use?
- § 560.203 What conditions apply to the bidding systems that BOEM uses?
- 258 Eligible Leases
- § 560.210 How do royalty suspension volumes apply to eligible leases?
- § 560.211 When does an eligible lease qualify for a royalty suspension volume?
- § 560.212 How does BOEM assign and monitor royalty suspension volumes for eligible leases?
- § 560.213 How long will a royalty suspension volume for an eligible lease be effective?
- § 560.214 How do I measure natural gas production on my eligible lease?
- 259 Royalty Suspension (RS) Leases
- § 560.220 How does royalty suspension apply to leases issued in a sale held after November 2000?
- § 560.221 When does a lease issued in a sale held after November 2000 get a royalty suspension?
- § 560.222 How long will a royalty suspension volume be effective for a lease issued in a sale held after November 2000?
- § 560.223 How do I measure natural gas production for a lease issued in a sale held after November 2000?
- § 560.224 How will royalty suspension apply if BOEM assigns a lease issued in a sale held after November 2000 to a field that has a pre-Act lease?
- 260 Bidding System Selection Criteria
- § 560.230 What criteria does BOEM use for selecting bidding systems and bidding system components?
- Subpart C Operating Allowances
- § 560.300 Operating allowances.
- D Subpart D [Reserved]
- Subpart E Electronic Filings
- § 560.500 Electronic document and data transmissions.
- § 560.501 How long will the confidentiality of electronic document and data transmissions be maintained?
- § 560.502 Are electronically filed document transmissions legally binding?
- PART 570 NONDISCRIMINATION IN THE OUTER CONTINENTAL SHELF
- § 570.1 Purpose.
- § 570.2 Application of this part.
- § 570.3 Definitions.
- § 570.4 Discrimination prohibited.
- § 570.5 Complaint.
- § 570.6 Process.
- § 570.7 Remedies.
- PART 580 PROSPECTING FOR MINERALS OTHER THAN OIL, GAS, AND SULPHUR ON THE OUTER CONTINENTAL SHELF
- Subpart A General Information
- § 580.1 What definitions apply to this part?
- § 580.2 What is the purpose of this part?
- § 580.3 What requirements must I follow when I conduct prospecting or research activities?
- § 580.4 What activities are not covered by this part?
- Subpart B How To Apply for a Permit or File a Notice
- § 580.10 What must I do before I may conduct prospecting activities?
- § 580.11 What must I do before I may conduct scientific research?
- § 580.12 What must I include in my application or notification?
- § 580.13 Where must I send my application or notification?
- Subpart C Obligations Under This Part
- 269 Prohibitions and Requirements
- § 580.20 What must I not do in conducting Geological and Geophysical (G&G) prospecting or scientific research?
- § 580.21 What must I do in conducting G&G prospecting or scientific research?
- § 580.22 What must I do when seeking approval for modifications?
- § 580.23 How must I cooperate with inspection activities?
- § 580.24 What reports must I file?
- 270 Interrupted Activities
- § 580.25 When may BOEM require me to stop activities under this part?
- § 580.26 When may I resume activities?
- § 580.27 When may BOEM cancel my permit?
- § 580.28 May I relinquish my permit?
- 271 Environmental Issues
- § 580.29 Will BOEM monitor the environmental effects of my activity?
- § 580.30 What activities will not require environmental analysis?
- § 580.31 Whom will BOEM notify about environmental issues?
- 272 Penalties and Appeals
- § 580.32 What penalties may I be subject to?
- § 580.33 How can I appeal a penalty?
- § 580.34 How can I appeal an order or decision?
- Subpart D Data Requirements
- 273 Geological Data and Information
- § 580.40 When do I notify BOEM that geological data and information are available for submission, inspection, and selection?
- § 580.41 What types of geological data and information must I submit to BOEM?
- § 580.42 When geological data and information are obtained by a third party, what must we both do?
- 274 Geophysical Data and Information
- § 580.50 When do I notify BOEM that geophysical data and information are available for submission, inspection, and selection?
- § 580.51 What types of geophysical data and information must I submit to BOEM?
- § 580.52 When geophysical data and information are obtained by a third party, what must we both do?
- 275 Reimbursement
- § 580.60 Which of my costs will be reimbursed?
- § 580.61 Which of my costs will not be reimbursed?
- 276 Protections
- § 580.70 What data and information will be protected from public disclosure?
- § 580.71 What is the timetable for release of data and information?
- § 580.72 What procedure will BOEM follow to disclose acquired data and information to a contractor for reproduction, processing, and interpretation?
- § 580.73 Will BOEM share data and information with coastal States?
- Subpart E Information Collection
- § 580.80 Paperwork Reduction Act statement—information collection.
- PART 581 LEASING OF MINERALS OTHER THAN OIL, GAS, AND SULPHUR IN THE OUTER CONTINENTAL SHELF
- Subpart A General
- § 581.0 Authority for information collection.
- § 581.1 Purpose and applicability.
- § 581.2 Authority.
- § 581.3 Definitions.
- § 581.4 Qualifications of lessees.
- § 581.5 False statements.
- § 581.6 Appeals.
- § 581.7 Disclosure of information to the public.
- § 581.8 Rights to minerals.
- § 581.9 Jurisdictional controversies.
- Subpart B Leasing Procedures
- § 581.11 Unsolicited request for a lease sale.
- § 581.12 Request for OCS mineral information and interest.
- § 581.13 Joint State/Federal coordination.
- § 581.14 OCS mining area identification.
- § 581.15 Tract size.
- § 581.16 Proposed leasing notice.
- § 581.17 Leasing notice.
- § 581.18 Bidding system.
- § 581.19 Lease term.
- § 581.20 Submission of bids.
- § 581.21 Award of leases.
- § 581.22 Lease form.
- § 581.23 Effective date of leases.
- Subpart C Financial Considerations
- § 581.26 Payments.
- § 581.27 Annual rental.
- § 581.28 Royalty.
- § 581.29 Royalty valuation.
- § 581.30 Minimum royalty.
- § 581.31 Overriding royalties.
- § 581.32 Waiver, suspension, or reduction of rental, minimum royalty, or production royalty.
- § 581.33 Bonds and bonding requirements.
- Subpart D Assignments and Lease Extensions
- § 581.40 Assignment of leases or interests therein.
- § 581.41 Requirements for filing for transfers.
- § 581.42 Effect of assignment on particular lease.
- § 581.43 Effect of suspensions on lease term.
- Subpart E Termination of Leases
- § 581.46 Relinquishment of leases or parts of leases.
- § 581.47 Cancellation of leases.
- PART 582 OPERATIONS IN THE OUTER CONTINENTAL SHELF FOR MINERALS OTHER THAN OIL, GAS, AND SULPHUR
- Subpart A General
- § 582.0 Authority for information collection.
- § 582.1 Purpose and authority.
- § 582.2 Scope.
- § 582.3 Definitions.
- § 582.4 Opportunities for review and comment.
- § 582.5 Disclosure of data and information to the public.
- § 582.6 Disclosure of data and information to an adjacent State.
- § 582.7 Jurisdictional controversies.
- Subpart B Jurisdiction and Responsibilities of Director
- § 582.10 Jurisdiction and responsibilities of Director.
- § 582.11 Director's authority.
- § 582.12 Director's responsibilities.
- § 582.13 [Reserved]
- § 582.14 Noncompliance, remedies, and penalties.
- § 582.15 Cancellation of leases.
- Subpart C Obligations and Responsibilities of Lessees
- § 582.20 Obligations and responsibilities of lessees.
- § 582.21 Plans, general.
- § 582.22 Delineation Plan.
- § 582.23 Testing Plan.
- § 582.24 Mining Plan.
- § 582.25 Plan modification.
- § 582.26 Contingency Plan.
- § 582.27 Conduct of operations.
- § 582.28 Environmental protection measures.
- § 582.29 Reports and records.
- § 582.30 Right of use and easement.
- § 582.31 [Reserved]
- Subpart D Payments
- § 582.40 Bonds.
- § 582.41 Method of royalty calculation.
- § 582.42 Payments.
- Subpart E Appeals
- § 582.50 Appeals.
- PART 583 NEGOTIATED NONCOMPETITIVE AGREEMENTS FOR THE USE OF OUTER CONTINENTAL SHELF SAND, GRAVEL, AND/OR SHELL RESOURCES
- Subpart A General
- § 583.100 What is BOEM's authority for information collection (IC)?
- § 583.105 What is the purpose of this part and to whom does it apply?
- § 583.110 What is BOEM's authority for this part?
- § 583.115 What definitions do I need to know?
- § 583.120 Who is qualified for a project?
- § 583.125 What are my rights to seek reconsideration of an unfavorable decision by BOEM?
- § 583.130 What are the minimum contents of an agreement to use OCS sand, gravel, and/or shell resources?
- Subpart B [Reserved]
- Subpart C Outer Continental Shelf Sand, Gravel, and/or Shell Resources Negotiated Agreements
- § 583.300 How do I submit a request for an agreement?
- § 583.305 How will BOEM determine if a project qualifies?
- § 583.310 What process does BOEM use to technically and environmentally evaluate a qualified project?
- § 583.315 What is the process for negotiating and executing an agreement?
- § 583.320 What kinds of information must be included in an agreement?
- § 583.325 What is the effective date of an agreement?
- § 583.330 How will BOEM enforce the agreement?
- § 583.335 What is the term of the agreement?
- § 583.340 What debarment or suspension obligations apply to transactions and contracts related to a project?
- § 583.345 What is the process for extending or modifying an agreement?
- § 583.350 When can an agreement be terminated?
- PART 585 RENEWABLE ENERGY ON THE OUTER CONTINENTAL SHELF
- Subpart A General Provisions
- § 585.100 Authority.
- § 585.101 What is the purpose of this part?
- § 585.102 What are BOEM's responsibilities under this part?
- § 585.103 When may BOEM prescribe or approve departures from the regulations in this part?
- § 585.104 Do I need a BOEM lease or other authorization to produce or support the production of electricity or other energy product from a renewable energy resource on the OCS?
- § 585.105 What are my responsibilities under this part?
- § 585.106 What happens if I fail to comply with this part?
- § 585.107 Who can acquire or hold a lease or grant under this part?
- § 585.108 How do I show that I am qualified to be a lessee or grant holder?
- § 585.109 When must I notify BOEM if an action has been filed alleging that I am insolvent or bankrupt?
- § 585.110 When must I notify BOEM of mergers, name changes, or changes of business form?
- § 585.111 How do I submit plans, applications, reports, or notices required by this part?
- § 585.112 When and how does BOEM charge me processing fees on a case-by-case basis?
- § 585.113 Definitions.
- § 585.114 How will data and information obtained by BOEM under this part be disclosed to the public?
- § 585.115 Paperwork Reduction Act statements—information collection.
- § 585.116 Requests for information.
- § 585.117 Severability.
- § 585.118 What are my appeal rights?
- §§ 585.119-585.149 [Reserved]
- B Subpart B [Reserved]
- Subpart C Issuance of OCS Renewable Energy Leases
- 310 General Lease Information
- § 585.200 What rights are granted with a lease issued under this part?
- § 585.201 How will BOEM issue leases?
- § 585.202 What types of leases will BOEM issue?
- § 585.203 With whom will BOEM consult before issuance of leases?
- § 585.204 What areas are available for leasing consideration?
- § 585.205 How will leases be mapped?
- § 585.206 What is the lease size?
- §§ 585.207-585.209 [Reserved]
- Competitive Lease Award Process Pre-Auction Provisions
- § 585.210 What are the steps in BOEM's competitive lease award process?
- § 585.211 What is the Call?
- § 585.212 What is area identification?
- § 585.213 What information is included in the PSN?
- § 585.214 What information is included in the FSN?
- § 585.215 What may BOEM do to assess whether competitive interest for a lease area still exists before the auction?
- § 585.216 How are bidding credits awarded and used?
- §§ 585.217-585.219 [Reserved]
- Competitive Lease Award Process Auction Provisions
- § 585.220 How will BOEM award leases competitively?
- § 585.221 What general provisions apply to all auctions?
- § 585.222 What other auction rules must bidders follow?
- § 585.223 What supplemental information will BOEM provide in a PSN and FSN?
- Competitive Lease Award Process Post-Auction Provisions
- § 585.224 What will BOEM do after the auction?
- § 585.225 What happens if BOEM accepts a bid?
- § 585.226 What happens if the provisional winner fails to meet its obligations?
- §§ 585.227-585.229 [Reserved]
- 314 Noncompetitive Lease Award Process
- § 585.230 May I request a lease if there is no Call?
- § 585.231 Will BOEM issue leases noncompetitively?
- § 585.232 May I acquire a lease noncompetitively after responding to a request for information or a Call for Information and Nominations?
- §§ 585.233-585.234 [Reserved]
- 315 Commercial and Limited Lease Periods
- § 585.235 What are the lease periods for a commercial lease?
- § 585.236 If I have a limited lease, how long will my lease remain in effect?
- § 585.237 What is the effective date of a lease?
- § 585.238 May I develop my commercial lease in phases?
- § 585.239 Are there any other renewable energy research activities that will be allowed on the OCS?
- §§ 585.240-585.299 [Reserved]
- Subpart D Right-of-Way (ROW) Grants and Right-of-Use and Easement (RUE) Grants for Renewable Energy Activities
- 316 ROW Grants and RUE Grants
- § 585.300 What types of activities are authorized by ROW grants and RUE grants issued under this part?
- § 585.301 What do ROW grants and RUE grants include?
- § 585.302 What are the general requirements for ROW grant and RUE grant holders?
- § 585.303 How long will my ROW grant or RUE grant remain in effect?
- § 585.304 [Reserved]
- 317 Obtaining ROW Grants and RUE Grants
- § 585.305 How do I request a ROW grant or a RUE grant?
- § 585.306 What action will BOEM take on my request?
- § 585.307 How will BOEM determine whether competitive interest exists for ROW grants and RUE grants?
- § 585.308 How will BOEM conduct an auction for ROW grants and RUE grants?
- § 585.309 What is the effective date of a ROW grant or a RUE grant?
- §§ 585.310-585.314 [Reserved]
- 318 Financial Requirements for ROW Grants and RUE Grants
- § 585.315 What deposits are required for a competitive ROW grant or RUE grant?
- § 585.316 What payments are required for ROW grants or RUE grants?
- §§ 585.317-585.399 [Reserved]
- Subpart E Lease and Grant Administration
- §§ 585.400-585.404 [Reserved]
- 319 Designation of Operator
- § 585.405 How do I designate an operator?
- § 585.406 Who is responsible for fulfilling lease and grant obligations?
- § 585.407 [Reserved]
- 320 Lease or Grant Assignment, Segregation, and Consolidation
- § 585.408 May I assign my lease or grant interest?
- § 585.409 How do I request approval of a lease or grant assignment?
- § 585.410 When will my assignment result in a segregated lease?
- § 585.411 How does an assignment affect the assignor's liability?
- § 585.412 How does an assignment affect the assignee's liability?
- § 585.413 How do I consolidate leases or grants?
- § 585.414 [Reserved]
- 321 Lease or Grant Suspension
- § 585.415 What is a lease or grant suspension?
- § 585.416 How do I request a lease or grant suspension?
- § 585.417 When may BOEM order a suspension?
- § 585.418 How will BOEM issue a suspension?
- § 585.419 What are my immediate responsibilities if I receive a suspension order?
- § 585.420 What effect does a suspension order have on my payments?
- § 585.421 How long will a lease or grant suspension be in effect?
- 322 Lease or Grant Cancellation
- § 585.422 When can my lease or grant be canceled?
- §§ 585.423-585.424 [Reserved]
- 323 Lease or Grant Renewal
- § 585.425 May I obtain a renewal of my lease or grant before it terminates?
- § 585.426 When must I submit my request for renewal?
- § 585.427 How long is a renewal?
- § 585.428 What effect does applying for a renewal have on my activities and payments?
- § 585.429 What criteria will BOEM consider in deciding whether to renew a lease or grant?
- §§ 585.430-585.431 [Reserved]
- 324 Lease or Grant Termination
- § 585.432 When does my lease or grant terminate?
- § 585.433 What must I do after my lease or grant terminates?
- § 585.434 When may BOEM authorize facilities to remain in place following termination of a lease or grant?
- 325 Lease or Grant Relinquishment, Contraction, or Cancellation
- § 585.435 How can I relinquish a lease or a grant or parts of a lease or grant?
- § 585.436 Can BOEM require lease or grant contraction?
- § 585.437 [Reserved]
- § 585.438 What happens to leases or grants (or portions thereof) that have been relinquished, contracted, or cancelled?
- §§ 585.439-585.499 [Reserved]
- Subpart F Payments and Financial Assurance Requirements
- 326 Payments
- § 585.500 How do I make payments under this part?
- § 585.501 What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant?
- § 585.502 What initial payment requirements must I meet to obtain a noncompetitive lease, ROW grant, or RUE grant?
- § 585.503 What are the rent and operating fee requirements for a commercial lease?
- § 585.504 How are my payments affected if I develop my commercial lease in phases?
- § 585.505 What are the rent and operating fee requirements for a limited lease?
- § 585.506 What operating fees must I pay on a commercial lease?
- § 585.507 What rent payments must I pay on a project easement?
- § 585.508 What rent payments must I pay on ROW grants or RUE grants associated with renewable energy projects?
- § 585.509 Who is responsible for submitting lease or grant payments to ONRR?
- § 585.510 May BOEM defer, reduce, or waive my lease or grant payments?
- §§ 585.511-585.515 [Reserved]
- 327 Financial Assurance Requirements for Commercial Leases
- § 585.516 What are the financial assurance requirements for each stage of my commercial lease?
- § 585.517 How will BOEM determine the supplemental financial assurance associated with commercial leases?
- §§ 585.518-585.519 [Reserved]
- 328 Financial Assurance for Limited Leases, ROW Grants, and RUE Grants
- § 585.520 What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant?
- § 585.521 Do my financial assurance requirements change as activities progress on my limited lease or grant?
- §§ 585.522-585.524 [Reserved]
- 329 Requirements for Financial Assurance Instruments
- § 585.525 What general requirements must a financial assurance instrument meet?
- § 585.526 What instruments other than a surety bond may I use to meet the financial assurance requirement?
- § 585.527 May I demonstrate financial strength and reliability to meet the financial assurance requirement for lease or grant activities?
- § 585.528 May I use a third-party guaranty to meet the financial assurance requirement for lease or grant activities?
- § 585.529 Can I use a lease- or grant-specific decommissioning account to meet the financial assurance requirements related to decommissioning?
- 330 Changes in Financial Assurance
- § 585.530 What must I do if my financial assurance lapses?
- § 585.531 What happens if the value of my financial assurance is reduced?
- § 585.532 What happens if my surety wants to terminate the period of liability of my financial assurance?
- § 585.533 How does my surety obtain cancellation of my financial assurance?
- § 585.534 When may BOEM cancel my financial assurance?
- § 585.535 Why might BOEM call for forfeiture of my financial assurance?
- § 585.536 How will I be notified of a call for forfeiture?
- § 585.537 How will BOEM proceed once my bond or other security is forfeited?
- §§ 585.538-585.539 [Reserved]
- 331 Revenue Sharing With States
- § 585.540 How will BOEM equitably distribute revenues to States?
- § 585.541 What is a qualified project for revenue sharing purposes?
- § 585.542 What makes a State eligible for payment of revenues?
- § 585.543 Example of how the inverse distance formula works.
- §§ 585.544-585.599 [Reserved]
- Subpart G Plans and Information Requirements
- § 585.600 What plans must I submit to BOEM before I conduct activities on my lease or grant?
- § 585.601 When must I submit my plans to BOEM?
- §§ 585.602-585.604 [Reserved]
- 332 Site Assessment Plan and Information Requirements for Commercial Leases
- § 585.605 What is a Site Assessment Plan (SAP)?
- § 585.606 What must I demonstrate in my SAP?
- § 585.607 How do I submit my SAP?
- §§ 585.608-585.609 [Reserved]
- 333 Contents of the Site Assessment Plan
- § 585.610 What must I include in my SAP?
- § 585.611 What information and certifications must I submit with my SAP to assist BOEM in complying with NEPA and other applicable laws?
- § 585.612 How will my SAP be processed for Federal consistency under the Coastal Zone Management Act?
- § 585.613 How will BOEM process my SAP?
- 334 Activities under an Approved SAP
- § 585.614 When may I begin conducting activities under my approved SAP?
- § 585.615 What other reports or notices must I submit to BOEM under my approved SAP?
- § 585.616 [Reserved]
- § 585.617 What activities require a revision to my SAP, and when will BOEM approve the revision?
- § 585.618 What must I do upon completion of approved site assessment activities?
- § 585.619 [Reserved]
- 335 Construction and Operations Plan for Commercial Leases
- § 585.620 What is a Construction and Operations Plan (COP)?
- § 585.621 What must I demonstrate in my COP?
- § 585.622 How do I submit my COP?
- §§ 585.623-585.625 [Reserved]
- 336 Contents of the Construction and Operations Plan
- § 585.626 What must I include in my COP?
- § 585.627 What information and certifications must I submit with my COP to assist BOEM in complying with NEPA and other applicable laws?
- § 585.628 How will BOEM process my COP?
- §§ 585.629-585.630 [Reserved]
- 337 Activities under an Approved COP
- § 585.631 When must I initiate activities under an approved COP?
- § 585.632 What documents must I submit before I may construct and install facilities under my approved COP?
- § 585.633 [Reserved]
- § 585.634 What activities require a revision to my COP, and when will BOEM approve the revision?
- § 585.635 What must I do if I cease activities approved in my COP before the end of my commercial lease?
- §§ 585.636-585.639 [Reserved]
- 338 General Activities Plan Requirements for Limited Leases, ROW Grants, and RUE Grants
- § 585.640 What is a General Activities Plan (GAP)?
- § 585.641 What must I demonstrate in my GAP?
- § 585.642 How do I submit my GAP?
- §§ 585.643-585.644 [Reserved]
- 339 Contents of the General Activities Plan
- § 585.645 What must I include in my GAP?
- § 585.646 What information and certifications must I submit with my GAP to assist BOEM in complying with NEPA and other applicable laws?
- § 585.647 How will my GAP be processed for Federal consistency under the Coastal Zone Management Act?
- § 585.648 How will BOEM process my GAP?
- § 585.649 [Reserved]
- 340 Activities under an Approved GAP
- § 585.650 When may I begin conducting activities under my GAP?
- § 585.651 When may I construct complex or significant OCS facilities on my limited lease or any facilities on my project easement proposed under my GAP?
- § 585.652 How long do I have to conduct activities under an approved GAP?
- § 585.653 What other reports or notices must I submit to BOEM under my approved GAP?
- § 585.654 [Reserved]
- § 585.655 What activities require a revision to my GAP, and when will BOEM approve the revision?
- § 585.656 What must I do if I cease activities approved in my GAP before the end of my term?
- § 585.657 What must I do upon completion of approved activities under my GAP?
- 341 Cable and Pipeline Deviations
- § 585.658 Can my cable or pipeline construction deviate from my approved COP or GAP?
- § 585.659-585.699 [Reserved]
- 342 Environmental Protection Requirements Under Approved Plans
- § 585.700 What requirements must I include in my SAP, COP, or GAP regarding air quality?
- § 585.701 How must I conduct my approved activities to protect marine mammals, threatened and endangered species, and designated critical habitat?
- § 585.702 What must I do if I discover a potential archaeological resource while conducting my approved activities?
- § 585.703 How must I conduct my approved activities to protect essential fish habitats identified and described under the Magnuson-Stevens Fishery Conservation and Management Act?
- PART 586 ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF
- Subpart A General Provisions
- § 586.100 Authority.
- § 586.101 What is the purpose of this part?
- § 586.102 What activities does this part regulate?
- § 586.103 What are BOEM's responsibilities under this part?
- § 586.104 When may BOEM prescribe or approve departures from the regulations in this part?
- § 586.105 What are my responsibilities under this part?
- § 586.106 What happens if I fail to comply with this part?
- § 586.107 Who can hold a grant under this part?
- § 586.108 How do I show that I am qualified to be a grant holder?
- § 586.109 When must I notify BOEM if an action has been filed alleging that I am insolvent or bankrupt?
- § 586.110 When must I notify BOEM of mergers, name changes, or changes of business form?
- § 586.111 How do I submit plans, applications, or notices required by this part?
- § 586.112 When and how does BOEM charge me processing fees on a case-by-case basis?
- § 586.113 Definitions.
- § 586.114 How will data and information obtained by BOEM under this part be disclosed to the public?
- § 586.115 Paperwork Reduction Act statements—information collection.
- §§ 586.116-586.117 [Reserved]
- § 586.118 What are my appeal rights?
- Subpart B Issuance of Alternate Use RUEs for Energy- and Marine-Related Activities Using Existing OCS Facilities
- 345 Requesting an Alternate Use RUE
- § 586.200 What must I do before I request an Alternate Use RUE?
- § 586.201 How do I request an Alternate Use RUE?
- § 586.202 How will BOEM decide whether to issue an Alternate Use RUE?
- § 586.203 What process will BOEM use for competitively offering an Alternate Use RUE?
- §§ 586.204-586.209 [Reserved]
- 346 Alternate Use RUE Administration
- § 586.210 How long may I conduct activities under an Alternate Use RUE?
- § 586.211 What payments are required for an Alternate Use RUE?
- § 586.212 What financial assurance is required for an Alternate Use RUE?
- § 586.213 Is an Alternate Use RUE assignable?
- § 586.214 When will BOEM suspend an Alternate Use RUE?
- § 586.215 How do I relinquish an Alternate Use RUE?
- § 586.216 When will an Alternate Use RUE be cancelled?
- § 586.217 [Reserved]
- § 586.218 Who is responsible for decommissioning an OCS facility subject to an Alternate Use RUE?
- § 586.219 What are decommissioning requirements for an Alternate Use RUE?
- SUBCHAPTER C APPEALS
- PART 590 APPEAL PROCEDURES
- Subpart A Bureau of Ocean Energy Management Appeal Procedures
- § 590.1 What is the purpose of this subpart?
- § 590.2 Who may appeal?
- § 590.3 What is the time limit for filing an appeal?
- § 590.4 How do I file an appeal?
- § 590.5 Can I obtain an extension for filing my Notice of Appeal?
- § 590.6 Are informal resolutions permitted?
- § 590.7 Do I have to comply with the decision or order while my appeal is pending?
- § 590.8 How do I exhaust my administrative remedies?
- B Subpart B [Reserved]
- 591-599 PARTS 591-599 [RESERVED]
- CHAPTER VII OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR
- SUBCHAPTER A GENERAL
- PART 700 GENERAL
- § 700.1 Scope.
- § 700.2 Objective.
- § 700.3 Authority.
- § 700.4 Responsibility.
- § 700.5 Definitions.
- § 700.10 Information collection.
- § 700.11 Applicability.
- § 700.12 Petitions to initiate rulemaking.
- § 700.13 Notice of citizen suits.
- § 700.14 Availability of records.
- § 700.15 Computation of time.
- PART 701 PERMANENT REGULATORY PROGRAM
- § 701.1 Scope.
- § 701.2 Objective.
- § 701.3 Authority.
- § 701.4 Responsibility.
- § 701.5 Definitions.
- § 701.11 Applicability.
- PART 702 EXEMPTION FOR COAL EXTRACTION INCIDENTAL TO THE EXTRACTION OF OTHER MINERALS
- § 702.1 Scope.
- § 702.5 Definitions.
- § 702.10 Information collection.
- § 702.11 Application requirements and procedures.
- § 702.12 Contents of application for exemption.
- § 702.13 Public availability of information.
- § 702.14 Requirements for exemption.
- § 702.15 Conditions of exemption and right of inspection and entry.
- § 702.16 Stockpiling of minerals.
- § 702.17 Revocation and enforcement.
- § 702.18 Reporting requirements.
- PART 705 RESTRICTION ON FINANCIAL INTERESTS OF STATE EMPLOYEES
- § 705.1 Purpose.
- § 705.2 Objectives.
- § 705.3 Authority.
- § 705.4 Responsibility.
- § 705.5 Definitions.
- § 705.6 Penalties.
- § 705.10 Information collection.
- § 705.11 Who shall file.
- § 705.13 When to file.
- § 705.15 Where to file.
- § 705.17 What to report.
- § 705.18 Gifts and gratuities.
- § 705.19 Resolving prohibited interests.
- § 705.21 Appeals procedures.
- PART 706 RESTRICTION ON FINANCIAL INTERESTS OF FEDERAL EMPLOYEES
- § 706.1 Purpose.
- § 706.2 Objectives.
- § 706.3 Definitions.
- § 706.4 Authority.
- § 706.5 Responsibility.
- § 706.6 Penalties.
- § 706.11 Who shall file.
- § 706.13 When to file.
- § 706.15 Where to file.
- § 706.17 What to report.
- § 706.18 Gifts and gratuities.
- § 706.19 Resolving prohibited interests.
- § 706.21 Appeals procedures.
- PART 707 EXEMPTION FOR COAL EXTRACTION INCIDENT TO GOVERNMENT-FINANCED HIGHWAY OR OTHER CONSTRUCTION
- § 707.1 Scope.
- § 707.4 Responsibility.
- § 707.5 Definitions.
- § 707.10 Information collection.
- § 707.11 Applicability.
- § 707.12 Information to be maintained on site.
- SUBCHAPTER B INITIAL PROGRAM REGULATIONS
- PART 710 INITIAL REGULATORY PROGRAM
- § 710.1 Scope.
- § 710.2 Objectives.
- § 710.3 Authority.
- § 710.4 Responsibility.
- § 710.5 Definitions.
- § 710.10 Information collection.
- § 710.11 Applicability.
- § 710.12 Special exemption for small operators.
- PART 715 GENERAL PERFORMANCE STANDARDS
- § 715.10 Information collection.
- § 715.11 General obligations.
- § 715.12 Signs and markers.
- § 715.13 Postmining use of land.
- § 715.14 Backfilling and grading.
- § 715.15 Disposal of excess spoil.
- § 715.16 Topsoil handling.
- § 715.17 Protection of the hydrologic system.
- § 715.18 Dams constructed of or impounding waste material.
- § 715.19 Use of explosives.
- § 715.20 Revegetation.
- § 715.200 Interpretative rules related to general performance standards.
- PART 716 SPECIAL PERFORMANCE STANDARDS
- § 716.1 General obligations.
- § 716.2 Steep-slope mining.
- § 716.3 Mountaintop removal.
- § 716.4 Special bituminous coal mines.
- § 716.5 Anthracite coal mines.
- § 716.6 Coal mines in Alaska.
- § 716.7 Prime farmland.
- § 716.10 Information collection.
- PART 717 UNDERGROUND MINING GENERAL PERFORMANCE STANDARDS
- § 717.10 Information collection.
- § 717.11 General obligations.
- § 717.12 Signs and markers.
- § 717.13 [Reserved]
- § 717.14 Backfilling and grading of road cuts, mine entry area cuts, and other surface work areas.
- § 717.15 Disposal of excess rock and earth materials on surface areas.
- § 717.16 [Reserved]
- § 717.17 Protection of the hydrologic system.
- § 717.18 Dams constructed of or impounding waste material.
- § 717.19 [Reserved]
- § 717.20 Topsoil handling and revegetation.
- PART 721 FEDERAL INSPECTIONS
- § 721.11 Extent.
- § 721.12 Right of entry.
- § 721.13 Inspections based on citizen requests.
- § 721.14 Failure to give notice and lack of reasonable belief.
- PART 722 ENFORCEMENT PROCEDURES
- § 722.1 Scope.
- § 722.11 Imminent dangers and harms.
- § 722.12 Non-imminent dangers or harms.
- § 722.13 Failure to abate.
- § 722.14 Service of notices of violation, cessation orders, and orders to show cause.
- § 722.15 Informal public hearing.
- § 722.16 Pattern of violations.
- § 722.17 Inability to comply.
- PART 723 CIVIL PENALTIES
- § 723.1 Scope.
- § 723.2 Objective.
- § 723.11 How assessments are made.
- § 723.12 When penalty will be assessed.
- § 723.13 Point system for penalties.
- § 723.14 Determination of amount of penalty.
- § 723.15 Assessment of separate violations for each day.
- § 723.16 Waiver of use of formula to determine civil penalty.
- § 723.17 Procedures for assessment of civil penalties.
- § 723.18 Procedures for assessment conference.
- § 723.19 Request for hearing.
- § 723.20 Final assessment and payment of penalty.
- PART 724 INDIVIDUAL CIVIL PENALTIES
- § 724.1 Scope.
- § 724.12 When an individual civil penalty may be assessed.
- § 724.14 Amount of individual civil penalty.
- § 724.17 Procedure for assessment of individual civil penalty.
- § 724.18 Payment of penalty.
- PART 725 REIMBURSEMENTS TO STATES
- § 725.1 Scope.
- § 725.2 Objectives.
- § 725.3 Authority.
- § 725.4 Responsibility.
- § 725.5 Definitions.
- § 725.10 Information collection.
- § 725.11 Eligibility.
- § 725.12 Coverage of grants.
- § 725.13 Amount of grants.
- § 725.14 Grant periods.
- § 725.15 Grant application procedures.
- § 725.16 Grant agreement.
- § 725.17 Grant amendments.
- § 725.18 Grant reduction and termination.
- § 725.19 Audit.
- § 725.20 Administrative procedures.
- § 725.21 Allowable costs.
- § 725.22 Financial management.
- § 725.23 Reports.
- § 725.24 Records.
- § 725.25 Disclosure of information.
- SUBCHAPTER C PERMANENT REGULATORY PROGRAMS FOR NON-FEDERAL AND NON-INDIAN LANDS
- PART 730 GENERAL REQUIREMENTS
- § 730.1 Scope.
- § 730.5 Definitions.
- § 730.11 Inconsistent and more stringent State laws and regulations.
- § 730.12 Requirements for regulatory programs in States.
- PART 731 SUBMISSION OF STATE PROGRAMS
- § 731.1 Scope.
- § 731.12 Submission of State programs.
- § 731.14 Content requirements for program submissions.
- PART 732 PROCEDURES AND CRITERIA FOR APPROVAL OR DISAPPROVAL OF STATE PROGRAM SUBMISSIONS
- § 732.1 Scope.
- § 732.10 Information collection.
- § 732.11 Review by the Director.
- § 732.13 Decision by the Secretary.
- § 732.14 Resubmission of State programs.
- § 732.15 Criteria for approval or disapproval of State programs.
- § 732.16 Terms and conditions for State programs.
- § 732.17 State program amendments.
- PART 733 EARLY IDENTIFICATION OF CORRECTIVE ACTION, MAINTENANCE OF STATE PROGRAMS, PROCEDURES FOR SUBSTITUTING FEDERAL ENFORCEMENT OF STATE PROGRAMS, AND WITHDRAWING APPROVAL OF STATE PROGRAMS
- § 733.1 Scope.
- § 733.5 Definitions.
- § 733.10 Information collection.
- § 733.11 General requirements for maintaining State programs.
- § 733.12 Early identification and corrective action to address State regulatory program issues.
- § 733.13 Procedures for substituting Federal enforcement of State programs or withdrawing approval of State programs.
- § 733.14 Factors to be considered in deciding whether to substitute Federal enforcement for State programs or to withdraw approval of State programs.
- PART 735 GRANTS FOR PROGRAM DEVELOPMENT AND ADMINISTRATION AND ENFORCEMENT
- § 735.1 Scope.
- § 735.2 Objectives.
- § 735.3 Authority.
- § 735.4 Responsibility.
- § 735.5 Definitions.
- § 735.10 Information collection.
- § 735.11 Eligibility for program development grants.
- § 735.12 Eligibility for administration and enforcement grants.
- § 735.13 Submission of estimated annual budgets and allocation of funds.
- § 735.14 Coverage of grants.
- § 735.15 Amount of grants.
- § 735.16 Special provisions for States with cooperative agreements.
- § 735.17 Grant periods.
- § 735.18 Grant application procedures.
- § 735.19 Grant agreement.
- § 735.20 Grant amendments.
- § 735.21 Grant reduction and termination.
- § 735.22 Audit.
- § 735.23 Administrative procedures.
- § 735.24 Allowable costs.
- § 735.25 Financial management.
- § 735.26 Reports.
- § 735.27 Records.
- § 735.28 Disclosure of information.
- PART 736 FEDERAL PROGRAM FOR A STATE
- § 736.1 Scope.
- § 736.11 General procedural requirements.
- § 736.12 Notice, comment and hearing procedures.
- § 736.13 [Reserved]
- § 736.14 Director's decision.
- § 736.15 Implementation, enforcement, and maintenance of a Federal program.
- § 736.16 Federal program termination procedures.
- § 736.17 Consolidation of procedures.
- § 736.21 General requirements of a Federal program.
- § 736.22 Contents of a Federal program.
- § 736.23 Federal program effect on State law or regulations.
- § 736.24 Federal program effect on State funding.
- § 736.25 Permit fees.
- SUBCHAPTER D FEDERAL LANDS PROGRAM
- PART 740 GENERAL REQUIREMENTS FOR SURFACE COAL MINING AND RECLAMATION OPERATIONS ON FEDERAL LANDS
- § 740.1 Scope and purpose.
- § 740.4 Responsibilities.
- § 740.5 Definitions.
- § 740.10 Information collection.
- § 740.11 Applicability.
- § 740.13 Permits.
- § 740.15 Bonds on Federal lands.
- § 740.17 Inspection, enforcement and civil penalties.
- § 740.19 Performance standards.
- PART 745 STATE-FEDERAL COOPERATIVE AGREEMENTS
- § 745.1 Scope.
- § 745.10 Information collection.
- § 745.11 Application and agreement.
- § 745.12 Terms.
- § 745.13 Authority reserved by the Secretary.
- § 745.14 Amendments.
- § 745.15 Termination.
- § 745.16 Reinstatement.
- PART 746 REVIEW AND APPROVAL OF MINING PLANS
- § 746.1 Scope.
- § 746.10 Information collection.
- § 746.11 General requirements.
- § 746.13 Decision document and recommendation on mining plan.
- § 746.14 Approval, disapproval or conditional approval, of mining plan.
- § 746.17 Term of approval.
- § 746.18 Mining plan modification.
- SUBCHAPTER E INDIAN LANDS PROGRAM
- PART 750 REQUIREMENTS FOR SURFACE COAL MINING AND RECLAMATION OPERATIONS ON INDIAN LANDS
- § 750.1 Scope.
- § 750.5 Definitions.
- § 750.6 Responsibilities.
- § 750.10 Information collection.
- § 750.11 Permits.
- § 750.12 Permit applications.
- § 750.13 Small operator assistance.
- § 750.14 Lands designated unsuitable for mining by Act of Congress.
- § 750.15 Coal exploration.
- § 750.16 Performance standards.
- § 750.17 Bonding.
- § 750.18 Inspection and enforcement.
- § 750.19 Certification of blasters.
- § 750.20 [Reserved]
- § 750.21 Coal extraction incidental to the extraction of other minerals.
- § 750.25 Permit fees.
- PART 755 TRIBAL-FEDERAL INTERGOVERNMENTAL AGREEMENTS
- § 755.1 Scope.
- § 755.10 Information collection.
- § 755.11 Application and agreement.
- § 755.12 Terms.
- § 755.13 Authority reserved by the Secretary.
- § 755.14 Amendments.
- § 755.15 Termination.
- PART 756 INDIAN TRIBE ABANDONED MINE LAND RECLAMATION PROGRAMS
- § 756.1 Scope.
- § 756.13 Approval of the Navajo Nation's abandoned mine land plan.
- § 756.14 Approval of amendments to the Navajo Nation's abandoned mine land plan.
- § 756.15 Required amendments to the Navajo Nation's abandoned mine land plan.
- § 756.16 Approval of the Hopi Tribe's abandoned mine land reclamation plan.
- § 756.17 Approval of the Hopi Tribe's abandoned mine land reclamation plan amendments.
- § 756.18 Required amendments to the Hopi Tribe's abandoned mine land reclamation plan.
- § 756.19 Approval of the Crow Tribe's abandoned mine land reclamation plan.
- § 756.20 Approval of amendments to the Crow Tribe's abandoned mine land reclamation plan.
- § 756.21 Required amendments to the Crow Tribe's abandoned mine land reclamation plan.
- SUBCHAPTER F AREAS UNSUITABLE FOR MINING
- PART 761 AREAS DESIGNATED BY ACT OF CONGRESS
- § 761.1 Scope.
- § 761.3 Authority.
- § 761.5 Definitions.
- § 761.10 Information collection.
- § 761.11 Areas where surface coal mining operations are prohibited or limited.
- § 761.12 Exception for existing operations.
- § 761.13 Procedures for compatibility findings for surface coal mining operations on Federal lands in national forests.
- § 761.14 Procedures for relocating or closing a public road or waiving the prohibition on surface coal mining operations within the buffer zone of a public road.
- § 761.15 Procedures for waiving the prohibition on surface coal mining operations within the buffer zone of an occupied dwelling.
- § 761.16 Submission and processing of requests for valid existing rights determinations.
- § 761.17 Regulatory authority obligations at time of permit application review.
- § 761.200 Interpretative rule related to subsidence due to underground coal mining in areas designated by Act of Congress.
- PART 762 CRITERIA FOR DESIGNATING AREAS AS UNSUITABLE FOR SURFACE COAL MINING OPERATIONS
- § 762.1 Scope.
- § 762.4 Responsibility.
- § 762.5 Definitions.
- § 762.11 Criteria for designating lands as unsuitable.
- § 762.12 Additional criteria.
- § 762.13 Land exempt from designation as unsuitable for surface coal mining operations.
- § 762.14 Applicability to lands designated as unsuitable by Congress.
- § 762.15 Exploration on land designated as unsuitable for surface coal mining operations.
- PART 764 STATE PROCESSES FOR DESIGNATING AREAS UNSUITABLE FOR SURFACE COAL MINING OPERATIONS
- § 764.1 Scope.
- § 764.10 Information collection.
- § 764.11 General process requirements.
- § 764.13 Petitions.
- § 764.15 Initial processing, recordkeeping, and notification requirements.
- § 764.17 Hearing requirements.
- § 764.19 Decision.
- § 764.21 Data base and inventory system requirements.
- § 764.23 Public information.
- § 764.25 Regulatory authority responsibility for implementation.
- PART 769 PETITION PROCESS FOR DESIGNATION OF FEDERAL LANDS AS UNSUITABLE FOR ALL OR CERTAIN TYPES OF SURFACE COAL MINING OPERATIONS AND FOR TERMINATION OF PREVIOUS DESIGNATIONS
- § 769.1 Scope.
- § 769.10 Information collection.
- § 769.11 Who may submit a petition.
- § 769.12 Where to submit petitions.
- § 769.13 Contents of petitions.
- § 769.14 Initial processing, recordkeeping, and notification requirements.
- § 769.15 Intervention.
- § 769.16 Public information.
- § 769.17 Hearing requirements.
- § 769.18 Decisions on petitions.
- § 769.19 Regulatory policy.
- SUBCHAPTER G SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS
- PART 772 REQUIREMENTS FOR COAL EXPLORATION
- § 772.1 Scope and purpose.
- § 772.10 Information collection.
- § 772.11 Notice requirements for exploration removing 250 tons of coal or less.
- § 772.12 Permit requirements for exploration that will remove more than 250 tons of coal or that will occur on lands designated as unsuitable for surface coal mining operations.
- § 772.13 Coal exploration compliance duties.
- § 772.14 Commercial use or sale.
- § 772.15 Public availability of information.
- PART 773 REQUIREMENTS FOR PERMITS AND PERMIT PROCESSING
- § 773.1 Scope and purpose.
- § 773.3 Information collection.
- § 773.4 Requirements to obtain permits.
- § 773.5 Regulatory coordination with requirements under other laws.
- § 773.6 Public participation in permit processing.
- § 773.7 Review of permit applications.
- § 773.8 General provisions for review of permit application information and entry of information into AVS.
- § 773.9 Review of applicant and operator information.
- § 773.10 Review of permit history.
- § 773.11 Review of compliance history.
- § 773.12 Permit eligibility determination.
- § 773.13 Unanticipated events or conditions at remining sites.
- § 773.14 Eligibility for provisionally issued permits.
- § 773.15 Written findings for permit application approval.
- § 773.16 Performance bond submittal.
- § 773.17 Permit conditions.
- § 773.19 Permit issuance and right of renewal.
- § 773.21 Initial review and finding requirements for improvidently issued permits.
- § 773.22 Notice requirements for improvidently issued permits.
- § 773.23 Suspension or rescission requirements for improvidently issued permits.
- § 773.25 Who may challenge ownership or control listings and findings.
- § 773.26 How to challenge an ownership or control listing or finding.
- § 773.27 Burden of proof for ownership or control challenges.
- § 773.28 Written agency decision on challenges to ownership or control listings or findings.
- PART 774 REVISION; RENEWAL; TRANSFER, ASSIGNMENT, OR SALE OF PERMIT RIGHTS; POST-PERMIT ISSUANCE REQUIREMENTS; AND OTHER ACTIONS BASED ON OWNERSHIP, CONTROL, AND VIOLATION INFORMATION
- § 774.1 Scope and purpose.
- § 774.9 Information collection.
- § 774.10 Regulatory authority review of permits.
- § 774.11 Post-permit issuance requirements for regulatory authorities and other actions based on ownership, control, and violation information.
- § 774.12 Post-permit issuance information requirements for permittees.
- § 774.13 Permit revisions.
- § 774.15 Permit renewals.
- § 774.17 Transfer, assignment, or sale of permit rights.
- PART 775 ADMINISTRATIVE AND JUDICIAL REVIEW OF DECISIONS
- § 775.1 Scope and purpose.
- § 775.11 Administrative review.
- § 775.13 Judicial review.
- PART 777 GENERAL CONTENT REQUIREMENTS FOR PERMIT APPLICATIONS
- § 777.1 Scope.
- § 777.10 Information collection.
- § 777.11 Format and contents.
- § 777.13 Reporting of technical data.
- § 777.14 Maps and plans: General requirements.
- § 777.15 Completeness.
- § 777.17 Permit fees.
- PART 778 PERMIT APPLICATIONS—MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED INFORMATION
- § 778.1 Scope and purpose.
- § 778.8 Information collection.
- § 778.9 Certifying and updating existing permit application information.
- § 778.11 Providing applicant and operator information.
- § 778.12 Providing permit history information.
- § 778.13 Providing property interest information.
- § 778.14 Providing violation information.
- § 778.15 Right-of-entry information.
- § 778.16 Status of unsuitability claims.
- § 778.17 Permit term.
- § 778.18 Insurance.
- § 778.21 Proof of publication.
- § 778.22 Facilities or structures used in common.
- PART 779 SURFACE MINING PERMIT APPLICATIONS—MINIMUM REQUIREMENTS FOR INFORMATION ON ENVIRONMENTAL RESOURCES
- § 779.1 Scope.
- § 779.2 Objectives.
- § 779.4 Responsibilities.
- § 779.10 Information collection.
- § 779.11 General requirements.
- § 779.12 General environmental resources information.
- § 779.18 Climatological information.
- § 779.19 Vegetation information.
- § 779.20 [Reserved]
- § 779.21 Soil resources information.
- § 779.24 Maps: General requirements.
- § 779.25 Cross sections, maps, and plans.
- PART 780 SURFACE MINING PERMIT APPLICATIONS—MINIMUM REQUIREMENT FOR RECLAMATION AND OPERATION PLAN
- § 780.1 Scope.
- § 780.2 Objectives.
- § 780.4 Responsibilities.
- § 780.10 Information collection.
- § 780.11 Operation plan: General requirements.
- § 780.12 Operation plan: Existing structures.
- § 780.13 Operation plan: Blasting.
- § 780.14 Operation plan: Maps and plans.
- § 780.15 Air pollution control plan.
- § 780.16 Fish and wildlife information.
- § 780.18 Reclamation plan: General requirements.
- § 780.21 Hydrologic information.
- § 780.22 Geologic information.
- § 780.23 Reclamation plan: Land use information.
- § 780.25 Reclamation plan: Siltation structures, impoundments, banks, dams, and embankments.
- § 780.27 Reclamation plan: Surface mining near underground mining.
- § 780.28 [Reserved]
- § 780.29 Diversions.
- § 780.31 Protection of publicly owned parks and historic places.
- § 780.33 Relocation or use of public roads.
- § 780.35 Disposal of excess spoil.
- § 780.37 Road systems.
- § 780.38 Support facilities.
- PART 783 UNDERGROUND MINING PERMIT APPLICATIONS—MINIMUM REQUIREMENTS FOR INFORMATION ON ENVIRONMENTAL RESOURCES
- § 783.1 Scope.
- § 783.2 Objectives.
- § 783.4 Responsibilities.
- § 783.10 Information collection.
- § 783.11 General requirements.
- § 783.12 General environmental resources information.
- § 783.18 Climatological information.
- § 783.19 Vegetation information.
- § 783.20 [Reserved]
- § 783.21 Soil resources information.
- § 783.24 Maps: General requirements.
- § 783.25 Cross sections, maps, and plans.
- PART 784 UNDERGROUND MINING PERMIT APPLICATIONS—MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN
- § 784.1 Scope.
- § 784.2 Objectives.
- § 784.4 Responsibilities.
- § 784.10 Information collection.
- § 784.11 Operation plan: General requirements.
- § 784.12 Operation plan: Existing structures.
- § 784.13 Reclamation plan: General requirements.
- § 784.14 Hydrologic information.
- § 784.15 Reclamation plan: Land use information.
- § 784.16 Reclamation plan: Siltation structures, impoundments, banks, dams, and embankments.
- § 784.17 Protection of publicly owned parks and historic places.
- § 784.18 Relocation or use of public roads.
- § 784.19 Underground development waste.
- § 784.20 Subsidence control plan.
- § 784.21 Fish and wildlife information.
- § 784.22 Geologic information.
- § 784.23 Operation plan: Maps and plans.
- § 784.24 Road systems.
- § 784.25 Return of coal processing waste to abandoned underground workings.
- § 784.26 Air pollution control plan.
- § 784.29 Diversions.
- § 784.30 Support facilities.
- § 784.200 Interpretive rules related to General Performance Standards.
- PART 785 REQUIREMENTS FOR PERMITS FOR SPECIAL CATEGORIES OF MINING
- § 785.1 Scope.
- § 785.2 Objective.
- § 785.10 Information collection.
- § 785.11 Anthracite surface coal mining and reclamation operations.
- § 785.12 Special bituminous surface coal mining and reclamation operations.
- § 785.13 Experimental practices mining.
- § 785.14 Mountaintop removal mining.
- § 785.15 Steep slope mining.
- § 785.16 Permits incorporating variances from approximate original contour restoration requirements for steep slope mining.
- § 785.17 Prime farmland.
- § 785.18 Variances for delay in contemporaneous reclamation requirement in combined surface and underground mining activities.
- § 785.19 Surface coal mining and reclamation operations on areas or adjacent to areas including alluvial valley floors in the arid and semiarid areas west of the 100th meridian.
- § 785.20 Augering.
- § 785.21 Coal preparation plants not located within the permit area of a mine.
- § 785.22 In situ processing activities.
- § 785.25 Lands eligible for remining.
- SUBCHAPTER H SMALL OPERATOR ASSISTANCE
- PART 795 PERMANENT REGULATORY PROGRAM—SMALL OPERATOR ASSISTANCE PROGRAM
- § 795.1 Scope and purpose.
- § 795.3 Definitions.
- § 795.4 Information collection.
- § 795.5 Grant application procedures.
- § 795.6 Eligibility for assistance.
- § 795.7 Filing for assistance.
- § 795.8 Application approval and notice.
- § 795.9 Program services and data requirements.
- § 795.10 Qualified laboratories.
- § 795.11 Assistance funding.
- § 795.12 Applicant liability.
- I [RESERVED] SUBCHAPTER I [RESERVED]
- SUBCHAPTER J PERFORMANCE BOND, FINANCIAL ASSURANCE, AND INSURANCE REQUIREMENTS FOR SURFACE COAL MINING AND RECLAMATION OPERATIONS
- PART 800 BOND AND INSURANCE REQUIREMENTS FOR SURFACE COAL MINING AND RECLAMATION OPERATIONS UNDER REGULATORY PROGRAMS
- § 800.1 Scope and purpose.
- § 800.4 Regulatory authority responsibilities.
- § 800.5 Definitions.
- § 800.10 Information collection.
- § 800.11 Requirement to file a bond.
- § 800.12 Form of the performance bond.
- § 800.13 Period of liability.
- § 800.14 Determination of bond amount.
- § 800.15 Adjustment of amount.
- § 800.16 General terms and conditions of bond.
- § 800.17 Bonding requirements for underground coal mines and long-term coal-related surface facilities and structures.
- § 800.20 Surety bonds.
- § 800.21 Collateral bonds.
- § 800.23 Self-bonding.
- § 800.30 Replacement of bonds.
- § 800.40 Requirement to release performance bonds.
- § 800.50 Forfeiture of bonds.
- § 800.60 Terms and conditions for liability insurance.
- § 800.70 Bonding for anthracite operations in Pennsylvania.
- SUBCHAPTER K PERMANENT PROGRAM PERFORMANCE STANDARDS
- PART 810 PERMANENT PROGRAM PERFORMANCE STANDARDS—GENERAL PROVISIONS
- § 810.1 Scope.
- § 810.2 Objective.
- § 810.3 Authority.
- § 810.4 Responsibility.
- § 810.11 Applicability.
- PART 815 PERMANENT PROGRAM PERFORMANCE STANDARDS—COAL EXPLORATION
- § 815.1 Scope and purpose.
- § 815.2 Permitting information.
- § 815.13 Required documents.
- § 815.15 Performance standards for coal exploration.
- PART 816 PERMANENT PROGRAM PERFORMANCE STANDARDS—SURFACE MINING ACTIVITIES
- § 816.1 Scope.
- § 816.2 Objectives.
- § 816.10 Information collection.
- § 816.11 Signs and markers.
- § 816.13 Casing and sealing of drilled holes: General requirements.
- § 816.14 Casing and sealing of drilled holes: Temporary.
- § 816.15 Casing and sealing of drilled holes: Permanent.
- § 816.22 Topsoil and subsoil.
- § 816.41 Hydrologic-balance protection.
- § 816.42 Hydrologic balance: Water quality standards and effluent limitations.
- § 816.43 Diversions.
- § 816.45 Hydrologic balance: Sediment control measures.
- § 816.46 Hydrologic balance: Siltation structures.
- § 816.47 Hydrologic balance: Discharge structures.
- § 816.49 Impoundments.
- § 816.56 Postmining rehabilitation of sedimentation ponds, diversions, impoundments, and treatment facilities.
- § 816.57 Hydrologic balance: Stream buffer zones.
- § 816.59 Coal recovery.
- § 816.61 Use of explosives: General requirements.
- § 816.62 Use of explosives: Preblasting survey.
- § 816.64 Use of explosives: Blasting schedule.
- § 816.66 Use of explosives: Blasting signs, warnings, and access control.
- § 816.67 Use of explosives: Control of adverse effects.
- § 816.68 Use of explosives: Records of blasting operations.
- § 816.71 Disposal of excess spoil: General requirements.
- § 816.72 Disposal of excess spoil: Valley fills/head-of-hollow fills.
- § 816.73 Disposal of excess spoil: Durable rock fills.
- § 816.74 Disposal of excess spoil: Preexisting benches.
- § 816.79 Protection of underground mining.
- § 816.81 Coal mine waste: General requirements.
- § 816.83 Coal mine waste: Refuse piles.
- § 816.84 Coal mine waste: Impounding structures.
- § 816.87 Coal mine waste: Burning and burned waste utilization.
- § 816.89 Disposal of noncoal mine wastes.
- § 816.95 Stabilization of surface areas.
- § 816.97 Protection of fish, wildlife, and related environmental values.
- § 816.99 Slides and other damage.
- § 816.100 Contemporaneous reclamation.
- § 816.101 [Reserved]
- § 816.102 Backfilling and grading: General requirements.
- § 816.104 Backfilling and grading: Thin overburden.
- § 816.105 Backfilling and grading: Thick overburden.
- § 816.106 Backfilling and grading: Previously mined areas.
- § 816.107 Backfilling and grading: Steep slopes.
- § 816.111 Revegetation: General requirements.
- § 816.113 Revegetation: Timing.
- § 816.114 Revegetation: Mulching and other soil stabilizing practices.
- § 816.116 Revegetation: Standards for success.
- § 816.131 Cessation of operations: Temporary.
- § 816.132 Cessation of operations: Permanent.
- § 816.133 Postmining land use.
- § 816.150 Roads: general.
- § 816.151 Primary roads.
- § 816.180 Utility installations.
- § 816.181 Support facilities.
- § 816.200 Interpretative rules related to general performance standards.
- PART 817 PERMANENT PROGRAM PERFORMANCE STANDARDS—UNDERGROUND MINING ACTIVITIES
- § 817.1 Scope.
- § 817.2 Objectives.
- § 817.10 Information collection.
- § 817.11 Signs and markers.
- § 817.13 Casing and sealing of exposed underground openings: General requirements.
- § 817.14 Casing and sealing of underground openings: Temporary.
- § 817.15 Casing and sealing of underground openings: Permanent.
- § 817.22 Topsoil and subsoil.
- § 817.41 Hydrologic-balance protection.
- § 817.42 Hydrologic balance: Water quality standards and effluent limitations.
- § 817.43 Diversions.
- § 817.45 Hydrologic balance: Sediment control measures.
- § 817.46 Hydrologic balance: Siltation structures.
- § 817.47 Hydrologic balance: Discharge structures.
- § 817.49 Impoundments.
- § 817.56 Postmining rehabilitation of sedimentation ponds, diversions, impoundments, and treatment facilities.
- § 817.57 Hydrologic balance: Stream buffer zones.
- § 817.59 Coal recovery.
- § 817.61 Use of explosives: General requirements.
- § 817.62 Use of explosives: Preblasting survey.
- § 817.64 Use of explosives: General performance standards.
- § 817.66 Use of explosives: Blasting signs, warnings, and access control.
- § 817.67 Use of explosives: Control of adverse effects.
- § 817.68 Use of explosives: Records of blasting operations.
- § 817.71 Disposal of excess spoil: General requirements.
- § 817.72 Disposal of excess spoil: Valley fill/head-of-hollow fills.
- § 817.73 Disposal of excess spoil: Durable rock fills.
- § 817.74 Disposal of excess spoil: Preexisting benches.
- § 817.81 Coal mine waste: General requirements.
- § 817.83 Coal mine waste: Refuse piles.
- § 817.84 Coal mine waste: Impounding structures.
- § 817.87 Coal mine waste: Burning and burned waste utilization.
- § 817.89 Disposal of noncoal mine wastes.
- § 817.95 Stabilization of surface areas.
- § 817.97 Protection of fish, wildlife, and related environmental values.
- § 817.99 Slides and other damage.
- § 817.100 Contemporaneous reclamation.
- § 817.102 Backfilling and grading: General requirements.
- § 817.106 Backfilling and grading: Previously mined areas.
- § 817.107 Backfilling and grading: Steep slopes.
- § 817.111 Revegetation: General requirements.
- § 817.113 Revegetation: Timing.
- § 817.114 Revegetation: Mulching and other soil stabilizing practices.
- § 817.116 Revegetation: Standards for success.
- § 817.121 Subsidence control.
- § 817.122 Subsidence control: Public notice.
- § 817.131 Cessation of operations: Temporary.
- § 817.132 Cessation of operations: Permanent.
- § 817.133 Postmining land use.
- § 817.150 Roads: General.
- § 817.151 Primary roads.
- § 817.180 Utility installations.
- § 817.181 Support facilities.
- § 817.200 Interpretative rules related to general performance standards.
- PART 819 SPECIAL PERMANENT PROGRAM PERFORMANCE STANDARDS-AUGER MINING
- § 819.1 Scope.
- § 819.11 Auger mining: General.
- § 819.13 Auger mining: Coal recovery.
- § 819.15 Auger mining: Hydrologic balance.
- § 819.17 Auger mining: Subsidence protection.
- § 819.19 Auger mining: Backfilling and grading.
- § 819.21 Auger mining: Protection of underground mining.
- PART 820 SPECIAL PERMANENT PROGRAM PERFORMANCE STANDARDS—ANTHRACITE MINES IN PENNSYLVANIA
- § 820.1 Scope.
- § 820.2 Objective.
- § 820.11 Performance standards: Anthracite mines in Pennsylvania.
- PART 822 SPECIAL PERMANENT PROGRAM PERFORMANCE STANDARDS—OPERATIONS IN ALLUVIAL VALLEY FLOORS
- § 822.1 Scope.
- § 822.10 Information collection.
- § 822.11 Essential hydrologic functions.
- § 822.12 Protection of agricultural activities.
- § 822.13 Monitoring.
- PART 823 SPECIAL PERMANENT PROGRAM PERFORMANCE STANDARDS—OPERATIONS ON PRIME FARMLAND
- § 823.1 Scope and purpose.
- § 823.4 Responsibilities.
- § 823.11 Applicability.
- § 823.12 Soil removal and stockpiling.
- § 823.14 Soil replacement.
- § 823.15 Revegetation and restoration of soil productivity.
- PART 824 SPECIAL PERMANENT PROGRAM PERFORMANCE STANDARDS—MOUNTAINTOP REMOVAL
- § 824.1 Scope.
- § 824.2 Objectives.
- § 824.11 Mountaintop removal: Performance standards.
- PART 825 SPECIAL PERMANENT PROGRAM PERFORMANCE STANDARDS—SPECIAL BITUMINOUS COAL MINES IN WYOMING
- § 825.1 Scope.
- § 825.2 Special bituminous coal mines in Wyoming.
- PART 827 PERMANENT PROGRAM PERFORMANCE STANDARDS—COAL PREPARATION PLANTS NOT LOCATED WITHIN THE PERMIT AREA OF A MINE
- § 827.1 Scope.
- § 827.11 General requirements.
- § 827.12 Coal preparation plants: Performance standards.
- § 827.13 Coal preparation plants: Interim performance standards.
- PART 828 SPECIAL PERMANENT PROGRAM PERFORMANCE STANDARDS—IN SITU PROCESSING
- § 828.1 Scope.
- § 828.2 Objectives.
- § 828.11 In situ processing: Performance standards.
- § 828.12 In situ processing: Monitoring.
- SUBCHAPTER L PERMANENT PROGRAM INSPECTION AND ENFORCEMENT PROCEDURES
- PART 840 STATE REGULATORY AUTHORITY: INSPECTION AND ENFORCEMENT
- § 840.1 Scope.
- § 840.10 Information collection.
- § 840.11 Inspections by State regulatory authority.
- § 840.12 Right of entry.
- § 840.13 Enforcement authority.
- § 840.14 Availability of records.
- § 840.15 Public participation.
- § 840.16 Compliance conference.
- PART 842 FEDERAL INSPECTIONS AND MONITORING
- § 842.1 Scope.
- § 842.5 [Reserved]
- § 842.11 Federal inspections and monitoring.
- § 842.12 Requests for Federal inspections.
- § 842.13 Right of entry.
- § 842.14 Review of adequacy and completeness of inspections.
- § 842.15 Review of decision not to inspect or enforce.
- § 842.16 Availability of records.
- PART 843 FEDERAL ENFORCEMENT
- § 843.1 Scope.
- § 843.5 Definitions.
- § 843.11 Cessation orders.
- § 843.12 Notices of violation.
- § 843.13 Suspension or revocation of permits: Pattern of violations.
- § 843.14 Service of notices of violation, cessation orders, and show cause orders.
- § 843.15 Informal public hearing.
- § 843.16 Formal review of citations.
- § 843.17 Failure to give notice and lack of information.
- § 843.18 Inability to comply.
- § 843.20 Compliance conference.
- § 843.22 Enforcement actions at abandoned sites.
- § 843.25 Energy Policy Act enforcement in States with approved State programs.
- PART 845 CIVIL PENALTIES
- § 845.1 Scope.
- § 845.2 Objective.
- § 845.11 How assessments are made.
- § 845.12 When penalty will be assessed.
- § 845.13 Point system for penalties.
- § 845.14 Determination of amount of penalty.
- § 845.15 Assessment of separate violations for each day.
- § 845.16 Waiver of use of formula to determine civil penalty.
- § 845.17 Procedures for assessment of civil penalties.
- § 845.18 Procedures for assessment conference.
- § 845.19 Request for hearing.
- § 845.20 Final assessment and payment of penalty.
- § 845.21 Use of civil penalties for reclamation.
- PART 846 INDIVIDUAL CIVIL PENALTIES
- § 846.1 Scope.
- § 846.12 When an individual civil penalty may be assessed.
- § 846.14 Amount of individual civil penalty.
- § 846.17 Procedure for assessment of individual civil penalty.
- § 846.18 Payment of penalty.
- PART 847 ALTERNATIVE ENFORCEMENT
- § 847.1 Scope.
- § 847.2 General provisions.
- § 847.11 Criminal penalties.
- § 847.16 Civil actions for relief.
- SUBCHAPTER M TRAINING, EXAMINATION, AND CERTIFICATION OF BLASTERS
- PART 850 PERMANENT REGULATORY PROGRAM REQUIREMENTS—STANDARDS FOR CERTIFICATION OF BLASTERS
- § 850.1 Scope.
- § 850.5 Definition.
- § 850.10 Information collection.
- § 850.12 Responsibility.
- § 850.13 Training.
- § 850.14 Examination.
- § 850.15 Certification.
- S N SUBCHAPTERS N-O [RESERVED]
- SUBCHAPTER P PROTECTION OF EMPLOYEES
- PART 865 PROTECTION OF EMPLOYEES
- § 865.1 Scope.
- § 865.11 Protected activity.
- § 865.12 Procedures for filing an application for review of discrimination.
- § 865.13 Investigation and conference procedures.
- § 865.14 Request for hearing.
- § 865.15 Formal adjudicatory proceedings.
- SUBCHAPTER R ABANDONED MINE LAND RECLAMATION
- PART 870 ABANDONED MINE RECLAMATION FUND—FEE COLLECTION AND COAL PRODUCTION REPORTING
- § 870.1 Scope.
- § 870.5 Definitions.
- § 870.10 Information collection.
- § 870.11 Applicability.
- § 870.12 Reclamation fee.
- § 870.13 Fee rates.
- § 870.14 Determination of percentage-based fees.
- § 870.15 Reclamation fee payment.
- § 870.16 Acceptable payment methods.
- § 870.17 Filing the OSM-1 Form.
- § 870.18 General rules for calculating excess moisture.
- § 870.19 How to calculate excess moisture in HIGH-rank coals.
- § 870.20 How to calculate excess moisture in LOW-rank coals.
- § 870.21 Late payments.
- § 870.22 Maintaining required production records.
- § 870.23 Consequences of noncompliance.
- PART 872 MONEYS AVAILABLE TO ELIGIBLE STATES AND INDIAN TRIBES
- § 872.1 What does this part do?
- § 872.5 Definitions.
- § 872.10 Information collection.
- § 872.11 Where do moneys in the Fund come from?
- § 872.12 Where do moneys distributed from the Fund and other sources go?
- § 872.13 What moneys does OSM distribute each year?
- § 872.14 What are State share funds?
- § 872.15 How does OSM distribute and award State share funds?
- § 872.16 Are there any restrictions on how States may use State share funds?
- § 872.17 What are Tribal share funds?
- § 872.18 How will OSM distribute and award Tribal share funds?
- § 872.19 Are there any restrictions on how Indian tribes may use Tribal share funds?
- § 872.20 What will OSM do with unappropriated AML funds currently allocated to the Rural Abandoned Mine Program ?
- § 872.21 What are historic coal funds?
- § 872.22 How does OSM distribute and award historic coal funds?
- § 872.23 Are there any restrictions on how you may use historic coal funds?
- § 872.24 What are Federal expense funds?
- § 872.25 Are there any restrictions on how OSM may use Federal expense funds?
- § 872.26 What are minimum program make up funds?
- § 872.27 How does OSM distribute and award minimum program make up funds?
- § 872.28 Are there any restrictions on how you may use minimum program make up funds?
- § 872.32 What are certified in lieu funds?
- § 872.33 How does OSM distribute and award certified in lieu funds?
- § 872.34 Are there any restrictions on how you may use certified in lieu funds?
- § 872.35 When will OSM reduce the amount of prior balance replacement funds or certified in lieu funds distributed to you?
- PART 873 FUTURE RECLAMATION SET-ASIDE PROGRAM
- § 873.1 Scope.
- § 873.11 Applicability.
- § 873.12 Future set-aside program criteria.
- PART 874 GENERAL RECLAMATION REQUIREMENTS
- § 874.1 Scope.
- § 874.5 Definitions.
- § 874.10 Information collection.
- § 874.11 Applicability.
- § 874.12 Eligible coal lands and water.
- § 874.13 Reclamation objectives and priorities.
- § 874.14 Water supply restoration.
- § 874.15 Limited liability.
- § 874.16 Contractor eligibility.
- § 874.17 AML agency procedures for reclamation projects receiving less than 50 percent government funding.
- PART 875 CERTIFICATION AND NONCOAL RECLAMATION
- § 875.1 Scope.
- § 875.5 Definitions.
- § 875.10 Information collection.
- § 875.11 Applicability.
- § 875.12 Eligible lands and water prior to certification.
- § 875.13 Certification of completion of coal sites.
- § 875.14 Eligible lands and water after certification.
- § 875.15 Reclamation priorities for noncoal program.
- § 875.16 Exclusion of certain noncoal reclamation sites.
- § 875.17 Land acquisition authority—noncoal.
- § 875.18 Lien requirements.
- § 875.19 Limited liability.
- § 875.20 Contractor eligibility.
- PART 876 ACID MINE DRAINAGE TREATMENT AND ABATEMENT PROGRAM
- § 876.1 Scope.
- § 876.10 Information collection.
- § 876.12 Eligibility.
- PART 877 RIGHTS OF ENTRY
- § 877.1 Scope.
- § 877.10 Information collection.
- § 877.11 Written consent for entry.
- § 877.13 Entry and consent to reclaim.
- § 877.14 Entry for emergency reclamation.
- PART 879 ACQUISITION, MANAGEMENT, AND DISPOSITION OF LANDS AND WATER
- § 879.1 Scope.
- § 879.5 Definitions.
- § 879.11 Land eligible for acquisition.
- § 879.12 Procedures for acquisition.
- § 879.13 Acceptance of gifts of land.
- § 879.14 Management of acquired land.
- § 879.15 Disposition of reclaimed land.
- PART 880 MINE FIRE CONTROL
- § 880.1 Scope.
- § 880.5 Definitions.
- § 880.11 Qualifications of projects.
- § 880.12 Cooperative agreements.
- § 880.13 Project implementation.
- § 880.14 Administration of contributions.
- § 880.15 Assistance by States or Indian tribes, local authorities, and private parties.
- § 880.16 Civil rights.
- PART 881 SUBSIDENCE AND STRIP MINE REHABILITATION, APPALACHIA
- § 881.1 Purpose and scope.
- § 881.2 Definitions.
- § 881.3 Qualification of projects.
- § 881.4 Application of contribution.
- § 881.5 Cooperative agreements.
- § 881.6 Project contract.
- § 881.7 Administration of contributions.
- § 881.8 Withholding of payments.
- § 881.9 Reports.
- § 881.10 Obligations of States or local authorities.
- § 881.11 Nondiscrimination.
- § 881.12 Civil rights.
- PART 882 RECLAMATION ON PRIVATE LAND
- § 882.1 Scope.
- § 882.10 Information collection.
- § 882.12 Appraisals.
- § 882.13 Liens.
- § 882.14 Satisfaction of liens.
- PART 884 STATE RECLAMATION PLANS
- § 884.1 Scope.
- § 884.5 Definitions.
- § 884.11 State eligibility.
- § 884.13 Content of proposed State reclamation plan.
- § 884.14 State reclamation plan approval.
- § 884.15 State reclamation plan amendments.
- § 884.16 Suspension of plan.
- § 884.17 Other uses by certified States and Indian tribes.
- PART 885 GRANTS FOR CERTIFIED STATES AND INDIAN TRIBES
- § 885.1 What does this part do?
- § 885.5 Definitions.
- § 885.10 Information collection.
- § 885.11 Who is eligible for a grant?
- § 885.12 What can I use grant funds for?
- § 885.13 What are the maximum grant amounts?
- § 885.14 How long is my grant?
- § 885.15 How do I apply for a grant?
- § 885.16 What responsibilities do I have after OSMRE approves my grant?
- § 885.17 How can my grant be amended?
- § 885.18 What audit, accounting, and administrative requirements must I meet?
- § 885.19 What happens to unused funds from my grant?
- § 885.20 What must I report?
- § 885.21 What happens if I do not comply with applicable Federal law or the terms of my grant?
- § 885.22 When and how can my grant be terminated for convenience?
- PART 886 RECLAMATION GRANTS FOR UNCERTIFIED STATES AND INDIAN TRIBES
- § 886.1 What does this part do?
- § 886.5 Definitions.
- § 886.10 Information collection.
- § 886.11 Who is eligible for a grant?
- § 886.12 What can I use grant funds for?
- § 886.13 What are the maximum grant amounts?
- § 886.14 How long will my grant be?
- § 886.15 How do I apply for a grant?
- § 886.16 After OSM approves my grant, what responsibilities do I have?
- § 886.17 How can my grant be amended?
- § 886.18 What audit and administrative requirements must I meet?
- § 886.19 How must I account for grant funds?
- § 886.20 What happens to unused funds from my grant?
- § 886.21 What must I report?
- § 886.22 What records must I maintain?
- § 886.23 What actions can OSM take if I do not comply with the terms of my grant?
- § 886.24 What procedures will OSM follow to reduce, suspend, or terminate my grant?
- § 886.25 How can I appeal a decision to reduce, suspend, or terminate my grant?
- § 886.26 When and how can my grant be terminated for convenience?
- § 886.27 What special procedures apply to Indian lands not subject to an approved Tribal reclamation program?
- PART 887 SUBSIDENCE INSURANCE PROGRAM GRANTS
- § 887.1 Scope.
- § 887.5 Definitions.
- § 887.10 Information collection.
- § 887.11 Eligibility for grants.
- § 887.12 Coverage and amount of grants.
- § 887.13 Grant period.
- § 887.15 Grant administration requirements and procedures.
- S [RESERVED] SUBCHAPTER S [RESERVED]
- SUBCHAPTER T PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE
- PART 900 INTRODUCTION
- § 900.1 Scope.
- § 900.2 Objectives.
- § 900.4 Responsibilities.
- § 900.11 Organization of this subchapter.
- § 900.12 State regulatory programs.
- § 900.13 Federal programs and Federal coal exploration programs.
- § 900.14 Abandoned mine land programs.
- § 900.15 Federal lands program cooperative agreements.
- PART 901 ALABAMA
- § 901.1 Scope.
- § 901.10 State regulatory program approval.
- § 901.15 Approval of Alabama regulatory program amendments.
- § 901.16 Required regulatory program amendments. [Reserved]
- § 901.20 Approval of Alabama abandoned mine land reclamation plan.
- § 901.25 Approval of Alabama abandoned mine land reclamation plan amendments.
- § 901.30 State-Federal cooperative agreement.
- PART 902 ALASKA
- § 902.1 Scope.
- § 902.10 State regulatory program approval.
- § 902.12 Regulatory program and proposed program amendments not approved.
- § 902.15 Approval of Alaska regulatory program amendments.
- § 902.16 Required program amendments.
- § 902.20 Approval of Alaska abandoned mine land reclamation plan.
- § 902.25 Approval of Alaska abandoned mine land reclamation plan amendments.
- PART 903 ARIZONA
- § 903.700 Arizona Federal program.
- § 903.701 General.
- § 903.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 903.707 Exemption for coal extraction incident to government-financed highway or other construction.
- § 903.736 Permit fees.
- § 903.761 Areas designated unsuitable for surface coal mining by act of Congress.
- § 903.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 903.764 Process for designating areas unsuitable for surface coal mining operations.
- § 903.772 Requirements for coal exploration.
- § 903.773 Requirements for permits and permit processing.
- § 903.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 903.775 Administrative and judicial review of decisions.
- § 903.777 General content requirements for permit applications.
- § 903.778 Permit applications—Minimum requirements for legal, financial, compliance, and related information.
- § 903.779 Surface mining permit applications—Minimum requirements for information on environmental resources.
- § 903.780 Surface mining permit applications—Minimum requirements for reclamation and operation plan.
- § 903.783 Underground mining permit applications—Minimum requirements for information on environmental resources.
- § 903.784 Underground mining permit applications—Minimum requirements for reclamation and operation plan.
- § 903.785 Requirements for permits for special categories of mining.
- § 903.795 Small operator assistance program.
- § 903.800 Bond and insurance requirements for surface coal mining and reclamation operations under regulatory programs.
- § 903.815 Performance standards—Coal exploration.
- § 903.816 Performance standards—Surface mining activities.
- § 903.817 Performance standards—Underground mining activities.
- § 903.819 Special performance standards—Auger mining.
- § 903.822 Special performance standards—Operations in alluvial valley floors.
- § 903.823 Special performance standards—Operations on prime farmland.
- § 903.824 Special performance standards—Mountaintop removal.
- § 903.827 Special performance standards—Coal preparation plants not located within the permit area of a mine.
- § 903.828 Special performance standards—In situ processing.
- § 903.842 Federal inspections.
- § 903.843 Federal enforcement.
- § 903.845 Civil penalties.
- § 903.846 Individual civil penalties.
- § 903.955 Certification of blasters.
- PART 904 ARKANSAS
- § 904.1 Scope.
- § 904.10 State regulatory program approval.
- § 904.12 State program provisions and amendments not approved.
- § 904.15 Approval of Arkansas regulatory program amendments.
- § 904.16 [Reserved]
- § 904.20 Approval of Arkansas abandoned mine land reclamation plan.
- § 904.25 Approval of Arkansas abandoned mine land reclamation plan amendments.
- § 904.26 Required plan amendments.
- PART 905 CALIFORNIA
- § 905.700 California Federal Program.
- § 905.701 General.
- § 905.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 905.707 Exemption for coal extraction incident to government-financed highway or other construction.
- § 905.761 Areas designated unsuitable for surface coal mining by act of Congress.
- § 905.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 905.764 Process for designating areas unsuitable for surface coal mining operations.
- § 905.772 Requirements for coal exploration.
- § 905.773 Requirements for permits and permit processing.
- § 905.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 905.775 Administrative and judicial review of decisions.
- § 905.777 General content requirements for permit applications.
- § 905.778 Permit application—Minimum requirements for legal, financial, compliance, and related information.
- § 905.779 Surface mining permit applications—Minimum requirements for information on environmental resources.
- § 905.780 Surface mining permit applications—Minimum requirements for reclamation and operation plan.
- § 905.783 Underground mining permit applications—Minimum requirements for information on environmental resources.
- § 905.784 Underground mining permit applications—Minimum requirements for reclamation and operation plan.
- § 905.785 Requirements for permits for special categories of mining.
- § 905.795 Small operator assistance program.
- § 905.800 Bond and insurance requirements for surface coal mining and reclamation operations under regulatory programs.
- § 905.815 Performance standards—Coal exploration.
- § 905.816 Performance standards—Surface mining activities.
- § 905.817 Performance standards—Underground mining activities.
- § 905.819 Special performance standards—Auger mining.
- § 905.822 Special performance standards—Operations in alluvial valley floors.
- § 905.823 Special performance standards—Operations on prime farmland.
- § 905.824 Special performance standards—Mountaintop removal.
- § 905.827 Special performance standards—Coal preparation plants not located within the permit area of a mine.
- § 905.828 Special performance standards—In situ processing.
- § 905.842 Federal inspections.
- § 905.843 Federal enforcement.
- § 905.845 Civil penalties.
- § 905.846 Individual civil penalties.
- § 905.955 Certification of blasters.
- PART 906 COLORADO
- § 906.1 Scope.
- § 906.10 State regulatory program approval.
- § 906.15 Approval of Colorado regulatory program amendments.
- § 906.16 Required program amendments.
- § 906.20 Approval of Colorado abandoned mine land reclamation plan.
- § 906.25 Approval of Colorado abandoned mine land reclamation plan amendments.
- § 906.30 State-Federal cooperative agreement.
- PART 910 GEORGIA
- § 910.700 Georgia Federal program.
- § 910.701 General.
- § 910.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 910.707 Exemption for coal extraction incident to government-financed highway or other construction.
- § 910.761 Areas designated unsuitable for surface coal mining by Act of Congress.
- § 910.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 910.764 Process for designating areas unsuitable for surface coal mining operations.
- § 910.772 Requirements for coal exploration.
- § 910.773 Requirements for permits and permit processing.
- § 910.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 910.775 Administrative and judicial review of decisions.
- § 910.777 General content requirements for permit applications.
- § 910.778 Permit applications—minimum requirements for legal, financial, compliance, and related information.
- § 910.779 Surface mining permit applications—minimum requirements for information on environmental resources.
- § 910.780 Surface mining permit applications—minimum requirements for reclamation and operation plan.
- § 910.783 Underground mining permit applications—minimum requirements for information on environmental resources.
- § 910.784 Underground mining permit applications—minimum requirements for reclamation and operation plan.
- § 910.785 Requirements for permits for special categories of mining.
- § 910.795 Small operator assistance.
- § 910.800 General requirements for bonding of surface coal mining and reclamation operations.
- § 910.815 Performance standards—coal exploration.
- § 910.816 Performance standards—surface mining activities.
- § 910.817 Performance standards—underground mining activities.
- § 910.819 Special performance standards—auger mining.
- § 910.823 Special performance standards—operations on prime farmland.
- § 910.824 Special performance standards—mountaintop removal.
- § 910.827 Special performance standards—coal processing plants and support facilities not located at or near the minesite or not within the permit area for a mine.
- § 910.828 Special performance standards—in situ processing.
- § 910.842 Federal inspections.
- § 910.843 Federal enforcement.
- § 910.845 Civil penalties.
- § 910.846 Individual civil penalties.
- § 910.955 Certification of blasters.
- PART 912 IDAHO
- § 912.700 Idaho Federal program.
- § 912.701 General.
- § 912.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 912.707 Exemption for coal extraction incident to Government-financed highway or other construction.
- § 912.761 Areas designated unsuitable for surface coal mining by act of Congress.
- § 912.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 912.764 Process for designating areas unsuitable for surface coal mining operations.
- § 912.772 Requirements for coal exploration.
- § 912.773 Requirements for permits and permit processing.
- § 912.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 912.775 Administrative and judicial review of decisions.
- § 912.777 General content requirements for permit applications.
- § 912.778 Permit applications—minimum requirements for legal, financial, compliance, and related information.
- § 912.779 Surface mining permit applications—minimum requirements for information on environmental resources.
- § 912.780 Surface mining permit applications—minimum requirements for reclamation and operation plan.
- § 912.783 Underground mining permit applications—minimum requirements for information on environmental resources.
- § 912.784 Underground mining permit applications—minimum requirements for reclamation and operation plan.
- § 912.785 Requirements for permits for special categories of mining.
- § 912.795 Small operator assistance.
- § 912.800 General requirements for bonding of surface coal mining and reclamation operations.
- § 912.815 Performance standards—coal exploration.
- § 912.816 Performance standards—surface mining activities.
- § 912.817 Performance standards—underground mining activities.
- § 912.819 Special performance standards—auger mining.
- § 912.822 Special performance standards—operations in alluvial valley floors.
- § 912.823 Special performance standards—operations on prime farmland.
- § 912.824 Special performance standards—mountaintop removal.
- § 912.827 Special performance standards—coal processing plants and support facilities not located at or near the minesite or not within the permit area for a mine.
- § 912.828 Special performance standards—in situ processing.
- § 912.842 Federal inspections.
- § 912.843 Federal enforcement.
- § 912.845 Civil penalties.
- § 912.846 Individual civil penalties.
- § 912.955 Certification of blasters.
- PART 913 ILLINOIS
- § 913.1 Scope.
- § 913.10 State regulatory program approval.
- § 913.15 Approval of Illinois regulatory program amendments.
- § 913.16 [Reserved]
- § 913.17 State regulatory program provisions and amendments disapproved.
- § 913.20 Approval of Illinois abandoned mine land reclamation plan.
- § 913.25 Approval of Illinois abandoned mine land reclamation plan amendments.
- § 913.30 State-Federal cooperative agreement.
- PART 914 INDIANA
- § 914.1 Scope.
- § 914.10 State regulatory program approval.
- § 914.15 Approval of Indiana regulatory program amendments.
- § 914.16 Required program amendments.
- § 914.17 State regulatory program and proposed program amendment provisions not approved.
- § 914.20 Approval of Indiana abandoned mine land reclamation plan.
- § 914.25 Approval of Indiana abandoned mine land reclamation plan amendments.
- § 914.30 State-Federal Cooperative Agreement.
- PART 915 IOWA
- § 915.1 Scope.
- § 915.10 State regulatory program approval.
- § 915.15 Approval of Iowa regulatory program amendments.
- § 915.16 Required program amendments. [Reserved]
- § 915.20 Approval of Iowa abandoned mine land reclamation plan.
- § 915.25 Approval of Iowa abandoned mine land reclamation plan amendments.
- PART 916 KANSAS
- § 916.1 Scope.
- § 916.10 State regulatory program approval.
- § 916.12 State regulatory program and proposed program amendment provisions not approved.
- § 916.15 Approval of Kansas regulatory program amendments.
- § 916.16 Required regulatory program amendments. [Reserved]
- § 916.20 Approval of Kansas abandoned mine land reclamation plan.
- § 916.25 Approval of Kansas abandoned mine land reclamation plan amendments.
- PART 917 KENTUCKY
- § 917.1 Scope.
- § 917.10 State regulatory program approval.
- § 917.11 Conditions of State regulatory program approval.
- § 917.12 State regulatory program and proposed program amendment provisions not approved.
- § 917.13 State statutory and regulatory provisions set aside.
- § 917.15 Approval of Kentucky regulatory program amendments.
- § 917.16 Required regulatory program amendments.
- § 917.17 State regulatory program amendments not approved.
- § 917.20 Approval of the Kentucky abandoned mine reclamation plan.
- § 917.21 Approval of Kentucky abandoned mine land reclamation plan amendments.
- § 917.30 State-Federal cooperative agreement.
- PART 918 LOUISIANA
- § 918.1 Scope.
- § 918.10 State regulatory program approval.
- § 918.15 Approval of Louisiana regulatory program amendments.
- § 918.16 Required program amendments.
- § 918.20 Approval of Louisiana abandoned mine land reclamation plan.
- § 918.25 Approval of Louisiana abandoned mine land reclamation plan amendments.
- PART 920 MARYLAND
- § 920.1 Scope.
- § 920.10 State program approval.
- § 920.12 State program provisions disapproved.
- § 920.15 Approval of Maryland regulatory program amendments.
- § 920.16 Required program amendments.
- § 920.20 Approval of Maryland abandoned mine plan.
- § 920.25 Approval of Maryland abandoned mine land reclamation plan amendments.
- PART 921 MASSACHUSETTS
- § 921.700 Massachusetts Federal program.
- § 921.701 General.
- § 921.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 921.707 Exemption for coal extraction incident to Government-financed highway or other construction.
- § 921.761 Areas designated unsuitable for surface coal mining by Act of Congress.
- § 921.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 921.764 Process for designating areas unsuitable for surface coal mining operations.
- § 921.772 Requirements for coal exploration.
- § 921.773 Requirements for permits and permit processing.
- § 921.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 921.775 Administrative and judicial review of decisions.
- § 921.777 General content requirements for permit applications.
- § 921.778 Permit applications—minimum requirements for legal, financial, compliance, and related information.
- § 921.779 Surface mining permit applications—minimum requirements for information on environmental resources.
- § 921.780 Surface mining permit applications—minimum requirements for reclamation and operation plan.
- § 921.783 Underground mining permit applications—minimum requirements for information on environmental resources.
- § 921.784 Underground mining permit applications—minimum requirements for reclamation and operation plan.
- § 921.785 Requirements for permits for special categories of mining.
- § 921.795 Small operator assistance.
- § 921.800 General requirements for bonding of surface coal mining and reclamation operations.
- § 921.815 Performance standards—coal exploration.
- § 921.816 Performance standards—surface mining activities.
- § 921.817 Performance standards—underground mining activities.
- § 921.819 Special performance standards—auger mining.
- § 921.823 Special performance standards—operations on prime farmland.
- § 921.824 Special performance standards—mountaintop removal.
- § 921.827 Special performance standards—coal processing plants and support facilities not located at or near the minesite or not within the permit area for a mine.
- § 921.828 Special performance standards—in situ processing.
- § 921.842 Federal inspections.
- § 921.843 Federal enforcement.
- § 921.845 Civil penalties.
- § 921.846 Individual civil penalties.
- § 921.955 Certification of blasters.
- PART 922 MICHIGAN
- § 922.700 Michigan Federal program.
- § 922.701 General.
- § 922.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 922.707 Exemption for coal extraction incident to government-financed highway or other construction.
- § 922.761 Areas designated unsuitable for surface coal mining by act of Congress.
- § 922.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 922.764 Process for designating areas unsuitable for surface coal mining operations.
- § 922.772 Requirements for coal exploration.
- § 922.773 Requirements for permits and permit processing.
- § 922.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 922.775 Administrative and judicial review of decisions.
- § 922.777 General content requirements for permit applications.
- § 922.778 Permit applications—minimum requirements for legal, financial, compliance, and related information.
- § 922.779 Surface mining permit applications—minimum requirements for information on environmental resources.
- § 922.780 Surface mining permit applications—minimum requirements for reclamation and operation plan.
- § 922.783 Underground mining permit applications—minimum requirements for information on environmental resources.
- § 922.784 Underground mining permit applications—minimum requirements for reclamation and operation plan.
- § 922.785 Requirements for permits for special categories of mining.
- § 922.795 Small operator assistance.
- § 922.800 General requirements for bonding of surface coal mining and reclamation operations.
- § 922.815 Performance standards—coal exploration.
- § 922.816 Performance standards—surface mining activities.
- § 922.817 Performance standards—underground mining activities.
- § 922.819 Special performance standards—auger mining.
- § 922.823 Special performance standards—operations on prime farmland.
- § 922.824 Special performance standards—mountaintop removal.
- § 922.827 Special performance standards—coal processing plants and support facilities not located at or near the minesite or not within the permit area for a mine.
- § 922.828 Special performance standards—in situ processing.
- § 922.842 Federal inspections.
- § 922.843 Federal enforcement.
- § 922.845 Civil penalties.
- § 922.846 Individual civil penalties.
- § 922.955 Certification of blasters.
- PART 924 MISSISSIPPI
- § 924.1 Scope.
- § 924.10 State program approval.
- § 924.15 Approval of Mississippi regulatory program amendments.
- § 924.16 Required program amendments.
- § 924.17 State regulatory program provisions and amendments not approved.
- § 924.20 Approval of Mississippi abandoned mine land reclamation plans.
- § 924.25 Approval of Mississippi abandoned mine land reclamation plan amendments.
- PART 925 MISSOURI
- § 925.1 Scope.
- § 925.10 State regulatory program approval.
- § 925.12 State program provisions and amendments disapproved.
- § 925.15 Approval of Missouri regulatory program amendments.
- § 925.16 Required program amendments.
- § 925.20 Approval of the Missouri abandoned mine land reclamation plan.
- § 925.25 Approval of Missouri abandoned mine land reclamation plan amendments.
- PART 926 MONTANA
- § 926.10 State regulatory program approval.
- § 926.12 State program provisions and amendments not approved.
- § 926.15 Approval of Montana regulatory program amendments.
- § 926.16 Required program amendments.
- § 926.20 Approval of Montana abandoned mine land reclamation plan.
- § 926.21 Required abandoned mine land plan amendments.
- § 926.25 Approval of Montana abandoned mine land reclamation plan amendments.
- § 926.30 State-Federal cooperative agreement.
- PART 931 NEW MEXICO
- § 931.1 Scope.
- § 931.10 State regulatory program approval.
- § 931.11 Conditions of the State program approval.
- § 931.13 Preemption of New Mexico laws and regulations.
- § 931.15 Approval of New Mexico regulatory program amendments.
- § 931.16 Required program amendments.
- § 931.20 Approval of the New Mexico abandoned mine reclamation plan.
- § 931.25 Approval of New Mexico abandoned mine land reclamation plan amendments.
- § 931.26 Required plan amendments.
- § 931.30 State-Federal cooperative agreement.
- PART 933 NORTH CAROLINA
- § 933.700 North Carolina Federal program.
- § 933.701 General.
- § 933.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 933.707 Exemption for coal extraction incident to government-financed highway or other construction.
- § 933.761 Areas designated unsuitable for surface coal mining by Act of Congress.
- § 933.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 933.764 Process for designating areas unsuitable for surface coal mining operations.
- § 933.772 Requirements for coal exploration.
- § 933.773 Requirements for permits and permit processing.
- § 933.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 933.775 Administrative and judicial review of decisions.
- § 933.777 General content requirements for permit applications.
- § 933.778 Permit applications—minimum requirements for legal, financial, compliance, and related information.
- § 933.779 Surface mining permit applications—minimum requirements for information on environmental resources.
- § 933.780 Surface mining permit applications—minimum requirements for reclamation and operation plan.
- § 933.783 Underground mining permit applications—minimum requirements for information on environmental resources.
- § 933.784 Underground mining permit applications—minimum requirements for reclamation and operation plan.
- § 933.785 Requirements for permits for special categories of mining.
- § 933.795 Small operator assistance.
- § 933.800 General requirements for bonding of surface coal mining and reclamation operations.
- § 933.815 Performance standards—coal exploration.
- § 933.816 Performance standards—surface mining activities.
- § 933.817 Performance standards—underground mining activities.
- § 933.819 Special performance standards—auger mining.
- § 933.823 Special performance standards—operations on prime farmland.
- § 933.824 Special performance standards—mountaintop removal.
- § 933.827 Special performance standards—coal processing plants and support facilities not located at or near the minesite or not within the permit area for a mine.
- § 933.828 Special performance standards—in situ processing.
- § 933.842 Federal inspections.
- § 933.843 Federal enforcement.
- § 933.845 Civil penalties.
- § 933.846 Individual civil penalties.
- § 933.955 Certification of blasters.
- PART 934 NORTH DAKOTA
- § 934.1 Scope.
- § 934.10 State program approval.
- § 934.12 State program amendments disapproved.
- § 934.13 State program provisions set aside.
- § 934.15 Approval of North Dakota regulatory program amendments.
- § 934.16 Required program amendments.
- § 934.20 Approval of North Dakota abandoned mine plan.
- § 934.25 Approval of North Dakota abandoned mine land reclamation plan amendments.
- § 934.30 State-Federal Cooperative Agreement.
- PART 935 OHIO
- § 935.1 Scope.
- § 935.10 State regulatory program approval.
- § 935.11 Conditions of State regulatory program approval.
- § 935.12 State statutory, regulatory, and proposed program amendments not approved.
- § 935.15 Approval of Ohio regulatory program amendments.
- § 935.16 Required regulatory program amendments.
- § 935.20 Approval of Ohio abandoned mine land reclamation plan.
- § 935.25 Approval of Ohio abandoned mine land reclamation plan amendments.
- § 935.30 State-Federal Cooperative Agreement.
- PART 936 OKLAHOMA
- § 936.1 Scope.
- § 936.10 State regulatory program approval.
- § 936.15 Approval of Oklahoma regulatory program amendments.
- § 936.16 Required regulatory program amendments.
- § 936.20 Approval of Oklahoma abandoned mine land reclamation plan.
- § 936.25 Approval of Oklahoma abandoned mine land reclamation plan amendments.
- § 936.30 State-Federal Cooperative Agreement.
- PART 937 OREGON
- § 937.700 Oregon Federal program.
- § 937.701 General.
- § 937.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 937.707 Exemption for coal extraction incident to government-financed highway or other construction.
- § 937.761 Areas designated unsuitable for surface coal mining by Act of Congress.
- § 937.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 937.764 Process for designating areas unsuitable for surface coal mining operations.
- § 937.772 Requirements for coal exploration.
- § 937.773 Requirements for permits and permit processing.
- § 937.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 937.775 Administrative and judicial review of decisions.
- § 937.777 General content requirements for permit applications.
- § 937.778 Permit applications—minimum requirements for legal, financial, compliance, and related information.
- § 937.779 Surface mining permit applications—minimum requirements for information on environmental resources.
- § 937.780 Surface mining permit applications—minimum requirements for reclamation and operation plan.
- § 937.783 Underground mining permit applications—minimum requirements for information on environmental resources.
- § 937.784 Underground mining permit applications—minimum requirements for reclamation and operation plan.
- § 937.785 Requirements for permits for special categories of mining.
- § 937.795 Small operator assistance.
- § 937.800 General requirements for bonding of surface coal mining and reclamation operations.
- § 937.815 Performance standards—coal exploration.
- § 937.816 Performance standards—surface mining activities.
- § 937.817 Performance standards—underground mining activities.
- § 937.819 Special performance standards—auger mining.
- § 937.823 Special performance standards—operations on prime farmland.
- § 937.824 Special performance standards—mountaintop removal.
- § 937.827 Special performance standards—coal processing plants and support facilities not located at or near the minesite or not within the permit area for a mine.
- § 937.828 Special performance standards—in situ processing.
- § 937.842 Federal inspections.
- § 937.843 Federal enforcement.
- § 937.845 Civil penalties.
- § 937.846 Individual civil penalties.
- § 937.955 Certification of blasters.
- PART 938 PENNSYLVANIA
- § 938.1 Scope.
- § 938.10 State regulatory program approval.
- § 938.11 Conditions of State regulatory program approval.
- § 938.12 State statutory, regulatory, and proposed program amendment provisions not approved.
- § 938.13 State statutory and regulatory provisions set aside.
- § 938.15 Approval of Pennsylvania regulatory program amendments.
- § 938.16 Required regulatory program amendments.
- § 938.20 Approval of Pennsylvania abandoned mine land reclamation plan.
- § 938.25 Approval of Pennsylvania abandoned mine land reclamation plan amendments.
- PART 939 RHODE ISLAND
- § 939.700 Rhode Island Federal program.
- § 939.701 General.
- § 939.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 939.707 Exemption for coal extraction incident to Government-financed highway or other construction.
- § 939.761 Areas designated unsuitable for surface coal mining by Act of Congress.
- § 939.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 939.764 Process for designating areas unsuitable for surface coal mining operations.
- § 939.772 Requirements for coal exploration.
- § 939.773 Requirements for permits and permit processing.
- § 939.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 939.775 Administrative and judicial review of decisions.
- § 939.777 General content requirements for permit applications.
- § 939.778 Permit applications—minimum requirements for legal, financial, compliance, and related information.
- § 939.779 Surface mining permit applications—minimum requirements for information on environmental resources.
- § 939.780 Surface mining permit applications—minimum requirements for reclamation and operations plan.
- § 939.783 Underground mining permit applications—minimum requirements for information on environmental resources.
- § 939.784 Underground mining permit applications—minimum requirements for reclamation and operation plan.
- § 939.785 Requirements for permits for special categories of mining.
- § 939.795 Small operator assistance.
- § 939.800 General requirements for bonding of surface coal mining and reclamation operations.
- § 939.815 Performance standards—coal exploration.
- § 939.816 Performance standards—surface mining activities.
- § 939.817 Performance standards—underground mining activities.
- § 939.819 Special performance standards—auger mining.
- § 939.823 Special performance standards—operations on prime farmland.
- § 939.824 Special performance standards—mountaintop removal.
- § 939.827 Special performance standards—coal processing plants and support facilities not located at or near the minesite or not within the permit area for a mine.
- § 939.828 Special performance standards—in situ processing.
- § 939.842 Federal inspections.
- § 939.843 Federal enforcement.
- § 939.845 Civil penalties.
- § 939.846 Individual civil penalties.
- § 939.955 Certification of blasters.
- PART 941 SOUTH DAKOTA
- § 941.700 South Dakota Federal program.
- § 941.701 General.
- § 941.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 941.707 Exemption for coal extraction incident to Government-financed highway or other construction.
- § 941.761 Areas designated unsuitable for surface coal mining by act of Congress.
- § 941.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 941.764 Process for designating areas unsuitable for surface coal mining operations.
- § 941.772 Requirements for coal exploration.
- § 941.773 Requirements for permits and permit processing.
- § 941.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 941.775 Administrative and judicial review of decisions.
- § 941.777 General content requirements for permit applications.
- § 941.778 Permit applications—minimum requirements for legal, financial, compliance, and related information.
- § 941.779 Surface mining permit applications—minimum requirements for information on environmental resources.
- § 941.780 Surface mining permit applications—minimum requirements for reclamation and operation plan.
- § 941.783 Underground mining permit applications—minimum requirements for information on environmental resources.
- § 941.784 Underground mining permit applications—minimum requirements for reclamation and operation plan.
- § 941.785 Requirements for permits for special categories of mining.
- § 941.795 Small operator assistance.
- § 941.800 General requirements for bonding of surface coal mining and reclamation operations.
- § 941.815 Performance standards—coal exploration.
- § 941.816 Performance standards—surface mining activities.
- § 941.817 Performance standards—underground mining activities.
- § 941.819 Special performance standards—auger mining.
- § 941.822 Special performance standards—operations in alluvial valley floors.
- § 941.823 Special performance standards—operations on prime farmland.
- § 941.824 Special performance standards—mountaintop removal.
- § 941.827 Special performance standards—coal processing plants and support facilities not located at or near the minesite or not within the permit area for a mine.
- § 941.828 Special performance standards—in situ processing.
- § 941.842 Federal inspections.
- § 941.843 Federal enforcement.
- § 941.845 Civil penalties.
- § 941.846 Individual civil penalties.
- § 941.955 Certification of blasters.
- PART 942 TENNESSEE
- § 942.20 Approval of Tennessee reclamation plan for lands and waters affected by past coal mining.
- § 942.25 Approval of Tennessee abandoned mine land reclamation plan amendments.
- § 942.700 Tennessee Federal program.
- § 942.701 General.
- § 942.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 942.707 Exemption for coal extraction incident to government-financed highway or other construction.
- § 942.761 Areas designated unsuitable for surface coal mining by act of Congress.
- § 942.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 942.764 Process for designating areas unsuitable for surface coal mining operations.
- § 942.772 Requirements for coal exploration.
- § 942.773 Requirements for permits and permit processing.
- § 942.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 942.775 Administrative and judicial review of decisions.
- § 942.777 General content requirements for permit applications.
- § 942.778 Permit applications—Minimum requirements for legal, financial, compliance, and related information.
- § 942.779 Surface mining permit applications—Minimum requirements for information on environmental resources.
- § 942.780 Surface mining permit applications—Minimum requirements for reclamation and operation plan.
- § 942.783 Underground mining permit applications—Minimum requirements for information on environmental resources.
- § 942.784 Underground mining permit applications—Minimum requirements for reclamation and operation plan.
- § 942.785 Requirements for permits for special categories of mining.
- § 942.795 Small operator assistance program.
- § 942.800 Bond and insurance requirements for surface coal mining and reclamation operations.
- § 942.815 Performance standards—Coal exploration.
- § 942.816 Performance standards—Surface mining activities.
- § 942.817 Performance standards—Underground mining activities.
- § 942.819 Special performance standards—Auger mining.
- § 942.823 Special performance standards—Operations on prime farmland.
- § 942.824 Special performance standards—Mountaintop removal.
- § 942.827 Special performance standards—Coal preparation plants not located within the permit area of a mine.
- § 942.828 Special performance standards—In situ processing.
- § 942.842 Federal inspections.
- § 942.843 Federal enforcement.
- § 942.845 Civil penalties.
- § 942.846 Individual civil penalties.
- § 942.955 Certification of blasters.
- PART 943 TEXAS
- § 943.1 Scope.
- § 943.10 State regulatory program approval.
- § 943.15 Approval of Texas regulatory program amendments.
- § 943.16 Required program amendments.
- § 943.20 Approval of Texas abandoned mine land reclamation plan.
- § 943.25 Approval of Texas abandoned mine land reclamation plan amendments.
- PART 944 UTAH
- § 944.1 Scope.
- § 944.10 State regulatory program approval.
- § 944.15 Approval of Utah regulatory program amendments.
- § 944.16 State regulatory program amendment provisions not approved.
- § 944.20 Approval of Utah abandoned mine plan.
- § 944.25 Approval of Utah abandoned mine land reclamation plan amendments.
- § 944.30 State-Federal Cooperative Agreement.
- PART 946 VIRGINIA
- § 946.1 Scope.
- § 946.10 State regulatory program approval.
- § 946.11 Conditions of State regulatory program approval.
- § 946.12 State program provisions and amendments not approved.
- § 946.13 State program provisions set aside.
- § 946.15 Approval of Virginia regulatory program amendments.
- § 946.20 Abandoned mine land reclamation plan approval.
- § 946.25 Approval of Virginia abandoned mine land reclamation plan amendments.
- § 946.30 State-Federal Cooperative Agreement.
- PART 947 WASHINGTON
- § 947.700 Washington Federal program.
- § 947.701 General.
- § 947.702 Exemption for coal extraction incidental to the extraction of other minerals.
- § 947.707 Exemption for coal extraction incident to government-financed highway or other construction.
- § 947.761 Areas designated unsuitable for surface coal mining by act of Congress.
- § 947.762 Criteria for designating areas as unsuitable for surface coal mining operations.
- § 947.764 Process for designating areas unsuitable for surface coal mining operations.
- § 947.772 Requirements for coal exploration.
- § 947.773 Requirements for permits and permit processing.
- § 947.774 Revision; renewal; and transfer, assignment, or sale of permit rights.
- § 947.775 Administrative and judicial review of decisions.
- § 947.777 General content requirements for permit applications.
- § 947.778 Permit applications—minimum requirements for legal, financial, compliance, and related information.
- § 947.779 Surface mining permit applications—minimum requirements for information on environmental resources.
- § 947.780 Surface mining permit application—minimum requirements for reclamation and operation plan.
- § 947.783 Underground mining permit applications—minimum requirements for information on environmental resources.
- § 947.784 Underground mining permit applications—minimum requirements for reclamation and operation plan.
- § 947.785 Requirements for permits for special categories of mining.
- § 947.795 Small operator assistance.
- § 947.800 Requirements for bonding of surface coal mining and reclamation operations.
- § 947.815 Performance standards—coal exploration.
- § 947.816 Performance standards—surface mining activities.
- § 947.817 Performance standards—underground mining activities.
- § 947.819 Special performance standards—auger mining.
- § 947.822 Special performance standards—operations on alluvial valley floors.
- § 947.823 Special performance standards—operations on prime farmland.
- § 947.824 Special performance standards—mountaintop removal.
- § 947.827 Special performance standards—coal processing plants and support facilities not located at or near the minesite or not within the permit area for a mine.
- § 947.828 Special performance standards—in situ processing.
- § 947.842 Federal inspections.
- § 947.843 Federal enforcement.
- § 947.845 Civil penalties.
- § 947.846 Individual civil penalties.
- § 947.955 Certification of blasters.
- PART 948 WEST VIRGINIA
- § 948.1 Scope.
- § 948.10 State regulatory program approval.
- § 948.12 State statutory, regulatory, and proposed program amendment provisions not approved.
- § 948.13 State statutory and regulatory provisions set aside.
- § 948.15 Approval of West Virginia regulatory program amendments.
- § 948.16 Required regulatory program amendments.
- § 948.20 Approval of State abandoned mine lands reclamation plan.
- § 948.25 Approval of West Virginia abandoned mine lands reclamation plan amendments.
- § 948.26 Required abandoned mine land reclamation program/plan amendments. [Reserved]
- § 948.30 State-Federal cooperative agreement.
- Appendix A to Part 948 State-Federal Cooperative Agreement
- PART 950 WYOMING
- § 950.1 Scope.
- § 950.10 State regulatory program approval.
- § 950.12 State program provisions and amendments not approved.
- § 950.15 Approval of Wyoming regulatory program amendments.
- § 950.16 Required program amendments.
- § 950.20 State-Federal Cooperative Agreement.
- § 950.30 Approval of Wyoming abandoned mine land reclamation plan.
- § 950.35 Approval of Wyoming abandoned mine land reclamation plan amendments.
- § 950.36 Required abandoned mine land plan amendments. [Reserved]
- PART 955 CERTIFICATION OF BLASTERS IN FEDERAL PROGRAM STATES AND ON INDIAN LANDS
- § 955.1 Scope.
- § 955.2 Implementation.
- § 955.5 Definitions.
- § 955.10 Information collection.
- § 955.11 General requirements.
- § 955.12 Training.
- § 955.13 Application.
- § 955.14 Examination.
- § 955.15 Certification.
- § 955.16 Reciprocity.
- § 955.17 Suspension and revocation.
- 956-999 PARTS 956-999 [RESERVED]
- CHAPTER XII OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR
- SUBCHAPTER A NATURAL RESOURCES REVENUE
- 1200 PART 1200 [RESERVED]
- PART 1201 GENERAL
- Subpart A General Provisions [Reserved]
- Subpart B Oil and Gas, General [Reserved]
- Subpart C Oil and Gas, Onshore
- § 1201.100 Responsibilities of the Director for Office of Natural Resources Revenue.
- Subpart D Oil, Gas and Sulphur, Offshore [Reserved]
- Subpart E Coal [Reserved]
- Subpart F Other Solid Minerals [Reserved]
- Subpart G Geothermal Resources [Reserved]
- Subpart H Indian Lands [Reserved]
- PART 1202 ROYALTIES
- Subpart A General Provisions [Reserved]
- Subpart B Oil, Gas, and OCS Sulfur, General
- § 1202.51 Scope and definitions.
- § 1202.52 Royalties.
- § 1202.53 Minimum royalty.
- Subpart C Federal and Indian Oil
- § 1202.100 Royalty on oil.
- § 1202.101 Standards for reporting and paying royalties.
- Subpart D Federal Gas
- § 1202.150 Royalty on gas.
- § 1202.151 Royalty on processed gas.
- § 1202.152 Standards for reporting and paying royalties on gas.
- Subpart E Solid Minerals, General [Reserved]
- Subpart F Coal
- § 1202.250 Overriding royalty interest.
- Subpart G Other Solid Minerals [Reserved]
- Subpart H Geothermal Resources
- § 1202.350 Scope and definitions.
- § 1202.351 Royalties on geothermal resources.
- § 1202.352 Minimum royalty.
- § 1202.353 Measurement standards for reporting and paying royalties and direct use fees.
- Subpart I OCS Sulfur [Reserved]
- Subpart J Gas Production From Indian Leases
- § 1202.550 How do I determine the royalty due on gas production?
- § 1202.551 How do I determine the volume of production for which I must pay royalty if my lease is not in an approved Federal unit or communitization agreement (AFA)?
- § 1202.552 How do I determine how much royalty I must pay if my lease is in an approved Federal unit or communitization agreement (AFA)?
- § 1202.553 How do I value my production if I take more than my entitled share?
- § 1202.554 How do I value my production that I do not take if I take less than my entitled share?
- § 1202.555 What portion of the gas that I produce is subject to royalty?
- § 1202.556 How do I determine the value of avoidably lost, wasted, or drained gas?
- § 1202.557 Must I pay royalty on insurance compensation for unavoidably lost gas?
- § 1202.558 What standards do I use to report and pay royalties on gas?
- PART 1203 RELIEF OR REDUCTION IN ROYALTY RATES
- § 1203.250 Advance royalty.
- § 1203.251 Reduction in royalty rate or rental.
- PART 1204 ALTERNATIVES FOR MARGINAL PROPERTIES
- Subpart A General Provisions
- § 1204.1 What is the purpose of this part?
- § 1204.2 What definitions apply to this part?
- § 1204.3 What alternatives are available for marginal properties?
- § 1204.4 What is a marginal property under this part?
- § 1204.5 What statutory requirements must I meet to obtain royalty prepayment or accounting and auditing relief?
- § 1204.6 May I appeal if ONRR denies my request for prepayment or other relief?
- Subpart B Prepayment of Royalty [Reserved]
- Subpart C Accounting and Auditing Relief
- § 1204.200 What is the purpose of this subpart?
- § 1204.201 Who may obtain accounting and auditing relief?
- § 1204.202 What is the cumulative royalty reports and payments relief option?
- § 1204.203 What is the other relief option?
- § 1204.204 What accounting and auditing relief will ONRR not allow?
- § 1204.205 How do I obtain accounting and auditing relief?
- § 1204.206 What will ONRR do when it receives my request for other relief?
- § 1204.207 Who will approve, deny, or modify my request for accounting and auditing relief?
- § 1204.208 May a State decide that it will or will not allow one or both of the relief options under this subpart?
- § 1204.209 What if a property ceases to qualify for relief obtained under this subpart?
- § 1204.210 What if a property is approved as part of a nonqualifying agreement?
- § 1204.211 When may ONRR rescind relief for a property?
- § 1204.212 What if I took relief for which I was ineligible?
- § 1204.213 May I obtain relief for a property that benefits from other Federal or State incentive programs?
- § 1204.214 Is minimum royalty due on a property for which I took relief?
- § 1204.215 Are the information collection requirements in this subpart approved by the Office of Management and Budget (OMB)?
- PART 1206 PRODUCT VALUATION
- Subpart A General Provisions and Definitions
- § 1206.10 Has the Office of Management and Budget (OMB) approved the information collection requirements in this part?
- § 1206.20 What definitions apply to this part?
- Subpart B Indian Oil
- § 1206.50 What is the purpose of this subpart?
- § 1206.51 What definitions apply to this subpart?
- § 1206.52 How do I calculate royalty value for oil that I or my affiliate sell(s) or exchange(s) under an arm's-length contract?
- § 1206.53 How do I calculate royalty value for oil that I or my affiliate do(es) not sell under an arm's-length contract?
- § 1206.54 How do I fulfill the lease provision regarding valuing production on the basis of the major portion of like-quality oil?
- § 1206.55 What are my responsibilities to place production into marketable condition and to market production?
- § 1206.56 What general transportation allowance requirements apply to me?
- § 1206.57 How do I determine a transportation allowance if I have an arm's-length transportation contract?
- § 1206.58 How do I determine a transportation allowance if I have a non-arm's-length transportation contract or have no contract?
- § 1206.59 What interest applies if I improperly report a transportation allowance?
- § 1206.60 What reporting adjustments must I make for transportation allowances?
- § 1206.61 How will ONRR determine if my royalty payments are correct?
- § 1206.62 How do I request a value determination?
- § 1206.63 How do I determine royalty quantity and quality?
- § 1206.64 What records must I keep to support my calculations of value under this subpart?
- § 1206.65 Does ONRR protect information that I provide?
- Subpart C Federal Oil
- § 1206.100 What is the purpose of this subpart?
- § 1206.101 How do I calculate royalty value for oil I or my affiliate sell(s) under an arm's-length contract?
- § 1206.102 How do I value oil not sold under an arm's-length contract?
- § 1206.103 What publications does ONRR approve?
- § 1206.104 How will ONRR determine if my royalty payments are correct?
- § 1206.105 How will ONRR determine the value of my oil for royalty purposes?
- § 1206.106 What records must I keep to support my calculations of value under this subpart?
- § 1206.107 What are my responsibilities to place production into marketable condition and to market production?
- § 1206.108 How do I request a valuation determination?
- § 1206.109 Does ONRR protect information that I provide?
- § 1206.110 What general transportation allowance requirements apply to me?
- § 1206.111 How do I determine a transportation allowance if I have an arm's-length transportation contract?
- § 1206.112 How do I determine a transportation allowance if I do not have an arm's-length transportation contract?
- § 1206.113 What adjustments and transportation allowances apply when I value oil production from my lease using NYMEX prices or ANS spot prices?
- § 1206.114 How will ONRR identify market centers?
- § 1206.115 What are my reporting requirements under an arm's-length transportation contract?
- § 1206.116 What are my reporting requirements under a non-arm's-length transportation contract?
- § 1206.117 What interest and penalties apply if I improperly report a transportation allowance?
- § 1206.118 What reporting adjustments must I make for transportation allowances?
- § 1206.119 How do I determine royalty quantity and quality?
- Subpart D Federal Gas
- § 1206.140 What is the purpose and scope of this subpart?
- § 1206.141 How do I calculate royalty value for unprocessed gas that I or my affiliate sell(s) under an arm's-length or non-arm's-length contract?
- § 1206.142 How do I calculate royalty value for processed gas that I or my affiliate sell(s) under an arm's-length or non-arm's-length contract?
- § 1206.143 How will ONRR determine if my royalty payments are correct?
- § 1206.144 How will ONRR determine the value of my gas for royalty purposes?
- § 1206.145 What records must I keep in order to support my calculations of royalty under this subpart?
- § 1206.146 What are my responsibilities to place production into marketable condition and to market production?
- § 1206.147 When is an ONRR audit, review, reconciliation, monitoring, or other like process considered final?
- § 1206.148 How do I request a valuation determination?
- § 1206.149 Does ONRR protect information that I provide?
- § 1206.150 How do I determine royalty quantity and quality?
- § 1206.151 [Reserved]
- § 1206.152 What general transportation allowance requirements apply to me?
- § 1206.153 How do I determine a transportation allowance if I have an arm's-length transportation contract?
- § 1206.154 How do I determine a transportation allowance if I have a non-arm's-length transportation contract?
- § 1206.155 What are my reporting requirements under an arm's-length transportation contract?
- § 1206.156 What are my reporting requirements under a non-arm's-length transportation contract?
- § 1206.157 What interest and penalties apply if I improperly report a transportation allowance?
- § 1206.158 What reporting adjustments must I make for transportation allowances?
- § 1206.159 What general processing allowances requirements apply to me?
- § 1206.160 How do I determine a processing allowance if I have an arm's-length processing contract?
- § 1206.161 How do I determine a processing allowance if I have a non-arm's-length processing contract?
- § 1206.162 What are my reporting requirements under an arm's-length processing contract?
- § 1206.163 What are my reporting requirements under a non-arm's-length processing contract?
- § 1206.164 What interest and penalties apply if I improperly report a processing allowance?
- § 1206.165 What reporting adjustments must I make for processing allowances?
- Subpart E Indian Gas
- § 1206.170 What does this subpart contain?
- § 1206.171 What definitions apply to this subpart?
- § 1206.172 How do I value gas produced from leases in an index zone?
- § 1206.173 How do I calculate the alternative methodology for dual accounting?
- § 1206.174 How do I value gas production when an index-based method cannot be used?
- § 1206.175 How do I determine quantities and qualities of production for computing royalties?
- § 1206.176 How do I perform accounting for comparison?
- 3 Transportation Allowances
- § 1206.177 What general requirements regarding transportation allowances apply to me?
- § 1206.178 How do I determine a transportation allowance?
- 4 Processing Allowances
- § 1206.179 What general requirements regarding processing allowances apply to me?
- § 1206.180 How do I determine an actual processing allowance?
- § 1206.181 How do I establish processing costs for dual accounting purposes when I do not process the gas?
- Subpart F Federal Coal
- § 1206.250 Purpose and scope.
- § 1206.251 Definitions.
- § 1206.252 Information collection.
- § 206.253 Coal subject to royalties—general provisions.
- § 1206.254 Quality and quantity measurement standards for reporting and paying royalties.
- § 1206.255 Point of royalty determination.
- § 1206.256 Valuation standards for cents-per-ton leases.
- § 1206.257 Valuation standards for ad valorem leases.
- § 1206.258 Washing allowances—general.
- § 1206.259 Determination of washing allowances.
- § 1206.260 Allocation of washed coal.
- § 1206.261 Transportation allowances—general.
- § 1206.262 Determination of transportation allowances.
- § 1206.263 [Reserved]
- § 1206.264 In-situ and surface gasification and liquefaction operations.
- § 1206.265 Value enhancement of marketable coal.
- Subpart G Other Solid Minerals
- § 1206.301 Value basis for royalty computation.
- Subpart H Geothermal Resources
- § 1206.350 What is the purpose of this subpart?
- § 1206.351 What definitions apply to this subpart?
- § 1206.352 How do I calculate the royalty due on geothermal resources used for commercial production or generation of electricity?
- § 1206.353 How do I determine transmission deductions?
- § 1206.354 How do I determine generating deductions?
- § 1206.355 How do I calculate royalty due on geothermal resources I sell at arm's length to a purchaser for direct use?
- § 1206.356 How do I calculate royalty or fees due on geothermal resources I use for direct use purposes?
- § 1206.357 How do I calculate royalty due on byproducts?
- § 1206.358 What are byproduct transportation allowances?
- § 1206.359 How do I determine byproduct transportation allowances?
- § 1206.360 What records must I keep to support my calculations of royalty or fees under this subpart?
- § 1206.361 How will ONRR determine whether my royalty or direct use fee payments are correct?
- § 1206.362 What are my responsibilities to place production into marketable condition and to market production?
- § 1206.363 When is an ONRR audit, review, reconciliation, monitoring, or other like process considered final?
- § 1206.364 How do I request a value or gross proceeds determination?
- § 1206.365 Does ONRR protect information I provide?
- § 1206.366 What is the nominal fee that a State, tribal, or local government lessee must pay for the use of geothermal resources?
- Subpart I OCS Sulfur [Reserved]
- Subpart J Indian Coal
- § 1206.450 What is the purpose and scope of this subpart?
- § 1206.451 Definitions.
- § 1206.452 Coal subject to royalties—general provisions.
- § 1206.453 Quality and quantity measurement standards for reporting and paying royalties.
- § 1206.454 Point of royalty determination.
- § 1206.455 Valuation standards for cents-per-ton leases.
- § 1206.456 Valuation standards for ad valorem leases.
- § 1206.457 Washing allowances—general.
- § 1206.458 Determination of washing allowances.
- § 1206.459 Allocation of washed coal.
- § 1206.460 Transportation allowances—general.
- § 1206.461 Determination of transportation allowances.
- § 1206.462 [Reserved]
- § 1206.463 In-situ and surface gasification and liquefaction operations.
- § 1206.464 Value enhancement of marketable coal.
- PART 1207 SALES AGREEMENTS OR CONTRACTS GOVERNING THE DISPOSAL OF LEASE PRODUCTS
- Subpart A General Provisions
- § 1207.1 Required recordkeeping.
- § 1207.2 Definitions.
- § 1207.3 Contracts made pursuant to new form leases.
- § 1207.4 Contracts made pursuant to old form leases.
- § 1207.5 Contract and sales agreement retention.
- Subpart B Oil, Gas, and OCS Sulfur, General [Reserved]
- Subpart C Federal and Indian Oil [Reserved]
- Subpart D Federal and Indian Gas [Reserved]
- Subpart E Solid Minerals, General [Reserved]
- Subpart F Coal [Reserved]
- Subpart G Other Solid Minerals [Reserved]
- Subpart H Geothermal Resources [Reserved]
- Subpart I OCS Sulfur [Reserved]
- PART 1208 SALE OF FEDERAL ROYALTY OIL
- Subpart A General Provisions
- § 1208.1 General.
- § 1208.2 Definitions.
- § 1208.3 Information collection.
- § 1208.4 Royalty oil sales to eligible refiners.
- § 1208.5 Notice of royalty oil sale.
- § 1208.6 General application procedures.
- § 1208.7 Determination of eligibility.
- § 1208.8 Transportation and delivery.
- § 1208.9 Agreements.
- § 1208.10 Notices.
- § 1208.11 Surety requirements.
- § 1208.12 Payment requirements.
- § 1208.13 Reporting requirements.
- § 1208.14 Civil and criminal penalties.
- § 1208.15 Audits.
- § 1208.16 How to appeal a contracting officer's decision that you receive.
- § 1208.17 Suspensions for national emergencies.
- B Subpart B [Reserved]
- PART 1210 FORMS AND REPORTS
- Subpart A General Provisions
- § 1210.01 What is the purpose of this subpart?
- § 1210.02 To whom do these regulations apply?
- § 1210.10 What are the OMB-approved information collections?
- § 1210.20 What if I disagree with the burden hour estimates?
- § 1210.21 How do I report my taxpayer identification number?
- § 1210.30 What are my responsibilities as a reporter/payor?
- § 1210.40 Will ONRR keep the information I provide confidential?
- Subpart B Royalty Reports—Oil, Gas, and Geothermal Resources
- § 1210.50 What is the purpose of this subpart?
- § 1210.51 Who must submit royalty reports?
- § 1210.52 What royalty reports must I submit?
- § 1210.53 When are my royalty reports and payments due?
- § 1210.54 Must I submit this royalty report electronically?
- § 1210.55 May I submit this royalty report manually?
- § 1210.56 Where can I find more information on how to complete the royalty report?
- § 1210.60 What definitions apply to this subpart?
- § 1210.61 What additional reporting requirements must I meet for Indian oil valuation purposes?
- Subpart C Production Reports—Oil and Gas
- § 1210.100 What is the purpose of this subpart?
- § 1210.101 Who must submit production reports?
- § 1210.102 What production reports must I submit?
- § 1210.103 When are my production reports due?
- § 1210.104 Must I submit these production reports electronically?
- § 1210.105 May I submit these production reports manually?
- § 1210.106 Where can I find more information on how to complete these production reports?
- Subpart D Special-Purpose Forms and Reports—Oil, Gas, and Geothermal Resources
- § 1210.150 What is the purpose of this subpart?
- § 1210.151 What reports must I submit to claim an excess allowance?
- § 1210.152 What reports must I submit to claim allowances on an Indian lease?
- § 1210.153 What reports must I submit for Indian gas valuation purposes?
- § 1210.154 What documents or other information must I submit for Federal oil valuation purposes?
- § 1210.155 What reports must I submit for Federal onshore stripper oil properties?
- § 1210.156 What reports must I submit for net profit share leases?
- § 1210.157 What reports must I submit to suspend an ONRR order under appeal?
- § 1210.158 What reports must I submit to designate someone to make my royalty payments?
- Subpart E Production and Royalty Reports—Solid Minerals
- § 1210.200 What is the purpose of this subpart?
- § 1210.201 How do I submit Form ONRR-4430, Solid Minerals Production and Royalty Report?
- § 1210.202 How do I submit sales summaries?
- § 1210.203 How do I submit sales contracts?
- § 1210.204 How do I submit facility data?
- § 1210.205 What reports must I submit to claim allowances on Indian coal leases?
- § 1210.206 Will I need to submit additional documents or evidence to ONRR?
- § 1210.207 How will information submissions be kept confidential?
- Subpart F Coal [Reserved]
- Subpart G Other Solid Minerals [Reserved]
- Subpart H Geothermal Resources
- § 1210.350 Definitions.
- § 1210.351 Required recordkeeping.
- § 1210.352 Special forms and reports.
- § 1210.353 Monthly report of sales and royalty.
- § 1210.354 Reporting instructions.
- Subpart I OCS Sulfur [Reserved]
- PART 1212 RECORDS AND FILES MAINTENANCE
- Subpart A General Provisions [Reserved]
- Subpart B Oil, Gas, and OCS Sulphur—General
- § 1212.50 Required recordkeeping and reports.
- § 1212.51 Records and files maintenance.
- § 1212.52 Definitions.
- Subpart C Federal and Indian Oil [Reserved]
- Subpart D Federal and Indian Gas [Reserved]
- Subpart E Solid Minerals—General
- § 1212.200 Maintenance of and access to records.
- Subpart F Coal [Reserved]
- Subpart G Other Solid Minerals [Reserved]
- Subpart H Geothermal Resources
- § 1212.350 Definitions.
- § 1212.351 Required recordkeeping and reports.
- Subpart I OCS Sulfur [Reserved]
- PART 1217 AUDITS AND INSPECTIONS
- Subpart A General Provisions
- § 1217.10 Providing records during an audit.
- Subpart B Oil and Gas, General
- § 1217.50 Audits of records.
- § 1217.51 Lease account reconciliation.
- § 1217.52 Definitions.
- Subpart C Oil and Gas, Onshore [Reserved]
- Subpart D Oil, Gas and Sulfur, Offshore [Reserved]
- Subpart E Coal
- § 1217.200 Audits.
- Subpart F Other Solid Minerals
- § 1217.250 Audits.
- Subpart G Geothermal Resources
- § 1217.300 Audit or review of records.
- § 1217.301 Lease account reconciliations.
- § 1217.302 Definitions.
- Subpart H Indian Lands [Reserved]
- PART 1218 COLLECTION OF ROYALTIES, RENTALS, BONUSES, AND OTHER MONIES DUE THE FEDERAL GOVERNMENT
- Subpart A General Provisions
- § 1218.10 Information collection.
- § 1218.40 Assessments for incorrect or late reports and failure to report.
- § 1218.41 Assessments for failure to submit payment of same amount as Form ONRR-2014 or bill document or to provide adequate information.
- § 1218.42 Cross-lease netting in calculation of late-payment interest.
- Subpart B Oil and Gas, General
- § 1218.50 Timing of payment.
- § 1218.51 How to make payments.
- § 1218.52 How does a lessee designate a Designee?
- § 1218.53 Recoupment of overpayments on Indian mineral leases.
- § 1218.54 Late payments.
- § 1218.55 Interest payments to Indians.
- § 1218.56 Definitions.
- Subpart C Oil and Gas, Onshore
- § 1218.100 Royalty and rental payments.
- § 1218.101 Royalty and rental remittance (naval petroleum reserves).
- § 1218.102 Late payment or underpayment charges.
- § 1218.103 Payments to States.
- § 1218.104 Exemption of States from certain interest and penalties.
- § 1218.105 Definitions.
- Subpart D Oil, Gas and Sulfur, Offshore
- § 1218.150 Royalties, net profit shares, and rental payments.
- § 1218.151 Rental fees.
- § 1218.152 Fishermen's Contingency Fund.
- § 1218.153 [Reserved]
- § 1218.154 Effect of suspensions on royalty and rental.
- § 1218.155 Method of payment.
- § 1218.156 Definitions.
- Subpart E Solid Minerals—General
- § 1218.200 Payment of royalties, rentals, and deferred bonuses.
- § 1218.201 Method of payment.
- § 1218.202 Late payment or underpayment charges.
- § 1218.203 Recoupment of overpayments on Indian mineral leases.
- Subpart F Geothermal Resources
- § 1218.300 Payment of royalties, rentals, and deferred bonuses.
- § 1218.301 Method of payment.
- § 1218.302 Late payment or underpayment charges.
- § 1218.303 May I credit rental towards royalty?
- § 1218.304 May I credit rental towards direct use fees?
- § 1218.305 How do I pay advanced royalties I owe under BLM regulations?
- § 1218.306 May I receive a credit against production royalties for in-kind deliveries of electricity I provide under contract to a State or county government?
- § 1218.307 How do I pay royalties due for my existing leases that qualify for near-term production incentives under BLM regulations?
- Subpart G Indian Lands [Reserved]
- Subpart H Service of Official Correspondence
- § 1218.500 What is the purpose of this subpart?
- § 1218.520 What definitions apply to this subpart?
- § 1218.540 How does ONRR serve official correspondence?
- § 1218.560 How do I submit Form ONRR-4444?
- § 1218.580 When do I submit Form ONRR-4444?
- I Subpart I [Reserved]
- Subpart J Debt Collection and Administrative Offset
- § 1218.700 What definitions apply to the regulations in this subpart?
- § 1218.701 What is ONRR's authority to issue these regulations?
- § 1218.702 What happens to delinquent debts you owe ONRR?
- § 1218.703 What notice will ONRR give you of our intent to refer a matter to Treasury to collect a debt?
- § 1218.704 What is ONRR's policy on interest and administrative costs?
- § 1218.705 What is ONRR's policy on recommending revocation of your ability to engage in Federal or Indian leasing, licensing, or granting of easements, permits, or rights-of-way?
- § 1218.706 What debts may ONRR refer to Treasury to collect by administrative offset or tax refund offset?
- PART 1219 DISTRIBUTION AND DISBURSEMENT OF ROYALTIES, RENTALS, AND BONUSES
- A Subparts A-B [Reserved]
- Subpart C Oil and Gas, Onshore
- § 1219.100 What is ONRR's timing of payment to the States?
- § 1219.101 What receipts are subject to an interest charge?
- § 1219.102 What is ONRR's method of payment to the States?
- § 1219.103 How will ONRR manage payments to Indian accounts?
- § 1219.104 What are Explanation of Payments to the States and Indian Tribes?
- § 1219.105 What definitions apply to this subpart?
- Subpart D Oil and Gas, Offshore, GOMESA Phase I Revenue Sharing
- § 1219.410 What does this subpart contain?
- § 1219.411 What definitions apply to this subpart?
- § 1219.412 How will ONRR divide the qualified OCS revenues (Phase I)?
- § 1219.413 How will ONRR determine each Gulf producing State's share of the qualified OCS revenues (Phase I) from leases in the 181 Area in the Eastern Planning Area and the 181 South Area?
- § 1219.414 How will ONRR allocate the qualified OCS revenues (Phase I) to coastal political subdivisions within the Gulf producing States?
- § 1219.415 How will ONRR allocate qualified OCS revenues (Phase I) to the coastal political subdivisions if, during any fiscal year, there are no applicable leased tracts in the 181 Area in the Eastern Gulf of Mexico Planning Area?
- § 1219.416 When will ONRR disburse funds to Gulf producing States and coastal political subdivisions?
- Subpart E Oil and Gas, Offshore, GOMESA Phase II Revenue Sharing
- § 1219.510 What does this subpart contain?
- § 1219.511 What definitions apply to this subpart?
- § 1219.512 How will ONRR divide the qualified OCS revenues (Phase II)?
- § 1219.513 How will ONRR determine each Gulf producing State's share of the qualified OCS revenues (Phase II) from leases in the 181 Area, the 181 South Area, and the 2002-2007 Planning Area?
- § 1219.514 How will ONRR allocate the qualified OCS revenues (Phase II) to coastal political subdivisions within the Gulf producing States?
- § 1219.515 How will ONRR update the group of “historical lease sites” and “applicable leased tracts (Phase II)” used for determining the allocation of shared revenues?
- § 1219.516 When will ONRR disburse funds to Gulf producing States and coastal political subdivisions?
- PART 1220 ACCOUNTING PROCEDURES FOR DETERMINING NET PROFIT SHARE PAYMENT FOR OUTER CONTINENTAL SHELF OIL AND GAS LEASES
- § 1220.001 Purpose and scope.
- § 1220.002 Definitions.
- § 1220.003 Information collection.
- § 1220.010 NPSL capital account.
- § 1220.011 Schedule of allowable direct and allocable joint costs and credits.
- § 1220.012 Overhead allowance.
- § 1220.013 Unallowable costs.
- § 1220.014 Allocation of joint costs and credits.
- § 1220.015 Pricing of materiel purchases, transfers, and dispositions.
- § 1220.020 Calculation of the allowance for capital recovery.
- § 1220.021 Determination of net profit share base.
- § 1220.022 Calculation of net profit share payment.
- § 1220.030 Maintenance of records.
- § 1220.031 Reporting and payment requirements.
- § 1220.032 Inventories.
- § 1220.033 Audits.
- § 1220.034 Redetermination and appeals.
- PART 1227 DELEGATION TO STATES
- 5 Delegation of ONRR Royalty Functions
- § 1227.1 What is the purpose of this part?
- § 1227.10 What is the authority for information collection?
- § 1227.101 What royalty management functions may ONRR delegate to a State?
- § 1227.102 What royalty management functions will ONRR not delegate?
- 6 Delegation Proposals
- § 1227.103 What must a State's delegation proposal contain?
- § 1227.104 What will ONRR do when it receives a State's delegation proposal?
- 7 Hearing Process
- § 1227.105 What are the hearing procedures?
- 8 Delegation Process
- § 1227.106 What statutory requirements must a State meet to receive a delegation?
- § 1227.107 When will the ONRR Director decide whether to approve a State's delegation proposal?
- § 1227.108 How will ONRR notify a State of its decision?
- § 1227.109 What if the ONRR Director denies a State's delegation proposal?
- § 1227.110 When and for how long are delegation agreements effective?
- 9 Existing Delegations
- § 1227.111 Do existing delegation agreements remain in effect?
- 10 Compensation
- § 1227.112 What compensation will a State receive to perform delegated functions?
- 11 States' Responsibilities To Perform Delegated Functions
- § 1227.200 What are a State's general responsibilities if it accepts a delegation?
- § 1227.201 What standards must a State comply with for performing delegated functions?
- § 1227.300 What audit functions may a State perform?
- § 1227.301 What are a State's responsibilities if it performs audits?
- § 1227.400 What functions may a State perform in processing production reports or royalty reports?
- § 1227.401 What are a State's responsibilities if it processes production reports or royalty reports?
- § 1227.500 What functions may a State perform to ensure that reporters correct erroneous report data?
- § 1227.501 What are a State's responsibilities to ensure that reporters correct erroneous data?
- § 1227.600 What automated verification functions may a State perform?
- § 1227.601 What are a State's responsibilities if it performs automated verification?
- § 1227.700 What enforcement documents may a State issue in support of its delegated function?
- 12 Performance Review
- § 1227.800 How will ONRR monitor a State's performance of delegated functions?
- § 1227.801 What if a State does not adequately perform a delegated function?
- § 1227.802 How will ONRR terminate a State's delegation agreement?
- § 1227.803 What are the hearing procedures for terminating a State's delegation agreement?
- § 1227.804 How else may a State's delegation agreement terminate?
- § 1227.805 How may a State obtain a new delegation agreement after termination?
- PART 1228 COOPERATIVE ACTIVITIES WITH STATES AND INDIAN TRIBES
- Subpart A General Provisions
- § 1228.1 Purpose.
- § 1228.2 Policy.
- § 1228.3 Limitation on applicability.
- § 1228.4 Authority.
- § 1228.5 Delegation of authority.
- § 1228.6 Definitions.
- § 1228.10 Information collection.
- Subpart B Oil and Gas, General [Reserved]
- Subpart C Oil and Gas, Onshore
- § 1228.100 Entering into an agreement.
- § 1228.101 Terms of agreement.
- § 1228.102 Establishment of standards.
- § 1228.103 Maintenance of records.
- § 1228.104 Availability of information.
- § 1228.105 Funding of cooperative agreements.
- § 1228.107 Eligible cost of activities.
- § 1228.108 Deduction of civil penalties accruing to the State or tribe from the Federal share of a cooperative agreement.
- PART 1229 DELEGATION TO STATES
- Subpart A General Provisions
- § 1229.1 Purpose.
- § 1229.2 Policy.
- § 1229.3 Limitation on applicability.
- § 1229.4 Authority.
- § 1229.6 Definitions.
- § 1229.10 Information collection requirements.
- Subpart B Oil and Gas, General [Reserved]
- Subpart C Oil and Gas, Onshore
- 15 Administration of Delegations
- § 1229.100 Authorities and responsibilities subject to delegation.
- § 1229.101 Petition for delegation.
- § 1229.102 Fact-finding and hearings.
- § 1229.103 Duration of delegations; termination of delegations.
- § 1229.104 Terms of delegation of authority.
- § 1229.105 Evidence of Indian agreement to delegation.
- § 1229.106 Withdrawal of Indian lands from delegated authority.
- § 1229.107 Disbursement of revenues.
- § 1229.108 Deduction of civil penalties accruing to the State or tribe under the delegation of authority.
- § 1229.109 Reimbursement for costs incurred by a State under the delegation of authority.
- § 1229.110 Examination of the State activities under delegation.
- § 1229.111 Materials furnished to States necessary to perform delegation.
- 16 Delegation Requirements
- § 1229.120 Obtaining regulatory and policy guidance.
- § 1229.121 Recordkeeping requirements.
- § 1229.122 Coordination of audit activities.
- § 1229.123 Standards for audit activities.
- § 1229.124 Documentation standards.
- § 1229.125 Preparation and issuance of enforcement documents.
- § 1229.126 Appeals.
- § 1229.127 Reports from States.
- PART 1241 PENALTIES
- Subpart A General Provisions
- § 1241.1 What is the purpose of this part?
- § 1241.2 What leases are subject to this part?
- § 1241.3 What definitions apply to this part?
- § 1241.4 How will ONRR serve a Notice?
- § 1241.5 Which ONRR enforcement actions are subject to a hearing?
- § 1241.6 Which ONRR enforcement actions are not subject to a hearing?
- § 1241.7 How do I request a hearing on the record on a Notice?
- § 1241.8 How will DCHD conduct the hearing on the record?
- § 1241.9 May I appeal the ALJ's decision?
- § 1241.10 May I seek judicial review of the IBLA decision?
- § 1241.11 Does my hearing request affect a penalty?
- Subpart B Notices of Noncompliance and Civil Penalties
- 19 Penalties With a Period To Correct
- § 1241.50 What may ONRR do if I violate a statute, regulation, order, or lease term relating to a lease subject to this part?
- § 1241.51 What if I correct the violation identified in a NONC?
- § 1241.52 What if I do not correct the violation identified in a NONC?
- 20 Penalties Without a Period To Correct
- § 1241.60 Am I subject to a penalty without prior notice and an opportunity to correct?
- Subpart C Penalty Amount, Interest, and Collections
- § 1241.70 How does ONRR decide the amount of the penalty to assess?
- § 1241.71 Do I owe interest on both the penalty amount and any underlying underpayment or unpaid debt?
- § 1241.72 When must I pay the penalty?
- § 1241.73 May ONRR reduce my penalty once it is assessed?
- § 1241.74 How may ONRR collect my penalty?
- PART 1243 SUSPENSIONS PENDING APPEAL AND BONDING—OFFICE OF NATURAL RESOURCES REVENUE
- Subpart A General Provisions
- § 1243.1 What is the purpose of this part?
- § 1243.2 What leases are subject to this part?
- § 1243.3 What definitions apply to this part?
- § 1243.4 How do I suspend compliance with an order?
- § 1243.5 May another person post a bond or other surety instrument or demonstrate financial solvency on my behalf?
- § 1243.6 When must I or another person meet the bonding or financial solvency requirements under this part?
- § 1243.7 What must a person do when posting a bond or other surety instrument or demonstrating financial solvency on behalf of an appellant?
- § 1243.8 When will ONRR suspend my obligation to comply with an order?
- § 1243.9 Will ONRR continue to suspend my obligation to comply with an order if I seek judicial review in a Federal court?
- § 1243.10 When will ONRR collect against a bond or other surety instrument or a person demonstrating financial solvency?
- § 1243.11 May I appeal the ONRR bond-approving officer's determination of my surety amount or financial solvency?
- § 1243.12 May I substitute a demonstration of financial solvency for a bond posted before the effective date of this rule?
- Subpart B Bonding Requirements
- § 1243.100 What standards must my ONRR-specified surety instrument meet?
- § 1243.101 How will ONRR determine the amount of my bond or other surety instrument?
- Subpart C Financial Solvency Requirements
- § 1243.200 How do I demonstrate financial solvency?
- § 1243.201 How will ONRR determine if I am financially solvent?
- § 1243.202 When will ONRR monitor my financial solvency?
- SUBCHAPTER B APPEALS
- PART 1290 APPEAL PROCEDURES
- § 1290.100 What is the purpose of this part?
- § 1290.101 What leases are subject to this part?
- § 1290.102 What definitions apply to this part?
- § 1290.103 Who may file an appeal?
- § 1290.104 What may I not appeal under this part?
- § 1290.105 How do I appeal an order?
- § 1290.106 How do lessees join a designee's appeal and how does joinder affect the appeal?
- § 1290.107 Where are the rules concerning the effect of the Department not issuing a decision in my appeal within the statutory time frame?
- § 1290.108 How do I appeal to the IBLA?
- § 1290.109 How do I request an extension of time?
- § 1290.110 How do I exhaust administrative remedies?
- § 1290.111 What happens if I do not pay or appeal an order?
- 1291-1299 PARTS 1291-1299 [RESERVED]